We already have an inany_ntop() function to format inany addresses into
text. Add inany_pton() to parse them from text, and use it in
conf_ports().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we store all our endpoints in the flowside structure, use some
inany helpers to make validation of those endpoints simpler.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Require the address and port information for the target (non
initiating) side to be populated when a flow enters TGT state.
Implement that for TCP and ICMP. For now this leaves some information
redundantly recorded in both generic and type specific fields. We'll
fix that in later patches.
For TCP we now use the information from the flow to construct the
destination socket address in both tcp_conn_from_tap() and
tcp_splice_connect().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This adds some extra inany helpers for comparing an inany address to
addresses of a specific family (including special addresses), and building
an inany from an IPv4 address (either statically or at runtime).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There are a number of places where we want to handle either a
sockaddr_in or a sockaddr_in6. In some of those we use a void *,
which works ok and matches some standard library interfaces, but
doesn't give a signature level hint that we're dealing with only
sockaddr_in or sockaddr_in6, not (say) sockaddr_un or another type of
socket address. Other places we use a sockaddr_storage, which also
works, but has the same problem in addition to allocating more on the
stack than we need to.
Introduce union sockaddr_inany to explictly handle this case: it has
variants for sockaddr_in and sockaddr_in6. Use it in a number of
places where it's easy to do so.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Our inany_addr type is used in some places to represent either IPv4 or
IPv6 addresses, and we plan to use it more widely. We don't yet
provide constants of this type for special addresses (loopback and
"any"). Add some of these, both the IPv4 and IPv6 variants of those
addresses, but typed as union inany_addr.
To avoid actually adding more things to .data we can use some macros and
casting to overlay the IPv6 versions of these with the standard library's
in6addr_loopback and in6addr_any. For the IPv4 versions we need to create
new constant globals.
For complicated historical reasons, the standard library doesn't
provide constants for IPv4 loopback and any addresses as struct
in_addr. It just has macros of type in_addr_t == uint32_t, which has
some gotchas w.r.t. endianness. We can use some more macros to
address this lack, using macros to effectively create these IPv4
constants as pieces of the inany constants above.
We use this last to avoid some awkward temporary variables just used
to get an address of an IPv4 loopback address.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Add this helper to format an inany into either IPv4 or IPv6 text
format as appropriate.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Add helpers to determine if an inany is loopback, unspecified or
multicast, regardless of whether it's a "true" IPv6 address or an IPv4
address represented as v4-mapped.
Use the loopback helper to simplify tcp_splice_conn_from_sock() slightly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Sometimes we use sa_family_t for variables and parameters containing a
socket address family, other times we use a plain int. Since sa_family_t
is what's actually used in struct sockaddr and friends, standardise on
that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
A while ago, we updated passt to require C11, for several reasons, but one
was to be able to use static_assert() for build time checks. The C11
version of static_assert() requires a message to print in case of failure
as well as the test condition it self. It was extended in C23 to make the
message optional, but we don't want to require C23 at this time.
Unfortunately we missed that in some of the static_assert()s we already
added which use the C23 form without a message. clang-tidy has a warning
for this, but for some reason it's not seeming to trigger in the current
cases (but did for some I'm working on adding).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We have a bunch of variants of the siphash functions for different data
sizes. The callers, in tcp.c, need to pack the various values they want to
hash into a temporary structure, then call the appropriate version. We can
avoid the copy into the temporary by directly using the incremental
siphash functions.
The length specific hash functions also have an undocumented constraint
that the data pointer they take must, in fact, be aligned to avoid
unaligned accesses, which may cause crashes on some architectures.
So, prefer the incremental approach and remove the length-specific
functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This was overlooked when the file was created.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In practical terms, passt doesn't benefit from the additional
protection offered by the AGPL over the GPL, because it's not
suitable to be executed over a computer network.
Further, restricting the distribution under the version 3 of the GPL
wouldn't provide any practical advantage either, as long as the passt
codebase is concerned, and might cause unnecessary compatibility
dilemmas.
Change licensing terms to the GNU General Public License Version 2,
or any later version, with written permission from all current and
past contributors, namely: myself, David Gibson, Laine Stump, Andrea
Bolognani, Paul Holzinger, Richard W.M. Jones, Chris Kuhn, Florian
Weimer, Giuseppe Scrivano, Stefan Hajnoczi, and Vasiliy Ulyanov.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There are some places in passt/pasta which #include <assert.h> and make
various assertions. If we hit these something has already gone wrong, but
they're there so that we a useful message instead of cryptic misbehaviour
if assumptions we thought were correct turn out not to be.
Except.. the glibc implementation of assert() uses syscalls that aren't in
our seccomp filter, so we'll get a SIGSYS before it actually prints the
message. Work around this by adding our own ASSERT() implementation using
our existing err() function to log the message, and an abort(). The
abort() probably also won't work exactly right with seccomp, but once we've
printed the message, dying with a SIGSYS works just as well as dying with
a SIGABRT.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
passt usually doesn't NAT, but it does do so for the remapping of the
gateway address to refer to the host. Currently we perform this NAT with
slightly different rules on both IPv4 addresses and IPv6 addresses, but not
on IPv4-mapped IPv6 addresses. This means we won't correctly handle the
case of an IPv4 connection over an IPv6 socket, which is possible on Linux
(and probably other platforms).
Refactor tcp_conn_from_sock() to perform the NAT after converting either
address family into an inany_addr, so IPv4 and and IPv4-mapped addresses
have the same representation.
With two new helpers this lets us remove the IPv4 and IPv6 specific paths
from tcp_conn_from_sock().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
struct tcp_conn stores an address which could be IPv6 or IPv4 using a
union. We can do this without an additional tag by encoding IPv4 addresses
as IPv4-mapped IPv6 addresses.
This approach is useful wider than the specific place in tcp_conn, so
expose a new 'union inany_addr' like this from a new inany.h. Along with
that create a number of helper functions to make working with these "inany"
addresses easier.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
