Logging to file is going to add some further complexity that we don't
want to squeeze into util.c.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
clang-tidy isn't quite clever enough to figure out that getenv("SHELL")
will return the same thing both times here, which makes it conclude that
shell could be NULL, causing problems later.
It's a bit ugly that we call getenv() twice in any case, so rework this in
a way that clang-tidy can figure out shell won't be NULL.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
passt/pasta can interact with user namespaces in a number of ways:
1) With --netns-only we'll remain in our original user namespace
2) With --userns or a PID option to pasta we'll join either the given
user namespace or that of the PID
3) When pasta spawns a shell or command we'll start a new user namespace
for the command and then join it
4) With passt we'll create a new user namespace when we sandbox()
ourself
However (3) and (4) turn out to have essentially the same effect. In both
cases we create one new user namespace. The spawned command starts there,
and passt/pasta itself will live there from sandbox() onwards.
Because of this, we can simplify user namespace handling by moving the
userns handling earlier, to the same point we drop root in the original
namespace. Extend the drop_user() function to isolate_user() which does
both.
After switching UID and GID in the original userns, isolate_user() will
either join or create the userns we require. When we spawn a command with
pasta_start_ns()/pasta_setup_ns() we no longer need to create a userns,
because we're already made one. sandbox() likewise no longer needs to
create (or join) an userns because we're already in the one we need.
We no longer need c->pasta_userns_fd, since the fd is only used locally
in isolate_user(). Likewise we can replace c->netns_only with a local
in conf(), since it's not used outside there.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
--netns-only is supposed to make pasta use only a network namespace, not
a user namespace. However, pasta_start_ns() has this backwards, and if
--netns-only is specified it creates a user namespace but *not* a network
namespace. Correct this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
conf_ns_open() opens file descriptors for the namespaces pasta needs, but
it doesnt really have anything to do with configuration any more. For
better clarity, move it to pasta.c and rename it pasta_open_ns(). This
makes the symmetry between it and pasta_start_ns() more clear, since these
represent the two basic ways that pasta can operate, either attaching to
an existing namespace/process or spawning a new one.
Since its no longer validating options, the errors it could return
shouldn't cause a usage message. Just exit directly with an error instead.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
passt/pasta contains a number of routines designed to isolate passt from
the rest of the system for security. These are spread through util.c and
passt.c. Move them together into a new isolation.c file.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When not given an existing PID or network namspace to attach to, pasta
spawns a shell. Most commands which can spawn a shell in an altered
environment can also run other commands in that same environment, which can
be useful in automation.
Allow pasta to do the same thing; it can be given an arbitrary command to
run in the network and user namespace which pasta creates. If neither a
command nor an existing PID or netns to attach to is given, continue to
spawn a default shell, as before.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are several places in the passt code where we have lint overrides
because we're not adding CLOEXEC flags to open or other operations.
Comments suggest this is because it's before we fork() into the background
but we'll need those file descriptors after we're in the background.
However, as the name suggests CLOEXEC closes on exec(), not on fork(). The
only place we exec() is either super early invoke the avx2 version of the
binary, or when we start a shell in pasta mode, which certainly *doesn't*
require the fds in question.
Add the CLOEXEC flag in those places, and remove the lint overrides.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The context structure contains a batch of fields specific to IPv4 and to
IPv6 connectivity. Split those out into a sub-structure.
This allows the conf_ip4() and conf_ip6() functions, which take the
entire context but touch very little of it, to be given more specific
parameters, making it clearer what it affects without stepping through the
code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
After recent changes, conf_ip() now has essentially entirely disjoint paths
for IPv4 and IPv6 configuration. So, it's cleaner to split them out into
different functions conf_ip4() and conf_ip6().
Splitting these out also lets us make the interface a bit nicer, having
them return success or failure directly, rather than manipulating c->v4
and c->v6 to indicate success/failure of the two versions.
Since these functions may also initialize the interface index for each
protocol, it turns out we can then drop c->v4 and c->v6 entirely, replacing
tests on those with tests on whether c->ifi4 or c->ifi6 is non-zero (since
a 0 interface index is never valid).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Whitespace fixes]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
It looks like glibc commonly implements clock_gettime(2) with
clock_gettime64(), and uses recv() instead of recvfrom(), send()
instead of sendto(), and sigreturn() instead of rt_sigreturn() on
armv6l and armv7l.
Adjust the list of system calls for armv6l and armv7l accordingly.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This should be convenient for users managing filesystem-bound network
namespaces: monitor the base directory of the namespace and exit if
the namespace given as PATH or NAME target is deleted. We can't add
an inotify watch directly on the namespace directory, that won't work
with nsfs.
Add an option to disable this behaviour, --no-netns-quit.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
To reach (at least) a conceptually equivalent security level as
implemented by --enable-sandbox in slirp4netns, we need to create a
new mount namespace and pivot_root() into a new (empty) mountpoint, so
that passt and pasta can't access any filesystem resource after
initialisation.
While at it, also detach IPC, PID (only for passt, to prevent
vulnerabilities based on the knowledge of a target PID), and UTS
namespaces.
With this approach, if we apply the seccomp filters right after the
configuration step, the number of allowed syscalls grows further. To
prevent this, defer the application of seccomp policies after the
initialisation phase, before the main loop, that's where we expect bad
things to happen, potentially. This way, we get back to 22 allowed
syscalls for passt and 34 for pasta, on x86_64.
While at it, move #syscalls notes to specific code paths wherever it
conceptually makes sense.
We have to open all the file handles we'll ever need before
sandboxing:
- the packet capture file can only be opened once, drop instance
numbers from the default path and use the (pre-sandbox) PID instead
- /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection
of bound ports in pasta mode, are now opened only once, before
sandboxing, and their handles are stored in the execution context
- the UNIX domain socket for passt is also bound only once, before
sandboxing: to reject clients after the first one, instead of
closing the listening socket, keep it open, accept and immediately
discard new connection if we already have a valid one
Clarify the (unchanged) behaviour for --netns-only in the man page.
To actually make passt and pasta processes run in a separate PID
namespace, we need to unshare(CLONE_NEWPID) before forking to
background (if configured to do so). Introduce a small daemon()
implementation, __daemon(), that additionally saves the PID file
before forking. While running in foreground, the process itself can't
move to a new PID namespace (a process can't change the notion of its
own PID): mention that in the man page.
For some reason, fork() in a detached PID namespace causes SIGTERM
and SIGQUIT to be ignored, even if the handler is still reported as
SIG_DFL: add a signal handler that just exits.
We can now drop most of the pasta_child_handler() implementation,
that took care of terminating all processes running in the same
namespace, if pasta started a shell: the shell itself is now the
init process in that namespace, and all children will terminate
once the init process exits.
Issuing 'echo $$' in a detached PID namespace won't return the
actual namespace PID as seen from the init namespace: adapt
demo and test setup scripts to reflect that.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Depending on the C library, but not necessarily in all the
functions we use, statx() might be used instead of stat(),
getdents() instead of getdents64(), readlinkat() instead of
readlink(), openat() instead of open().
On aarch64, it's clone() and not fork(), and dup3() instead of
dup2() -- just allow the existing alternative instead of dealing
with per-arch selections.
Since glibc commit 9a7565403758 ("posix: Consolidate fork
implementation"), we need to allow set_robust_list() for
fork()/clone(), even in a single-threaded context.
On some architectures, epoll_pwait() is provided instead of
epoll_wait(), but never both. Same with newfstat() and
fstat(), sigreturn() and rt_sigreturn(), getdents64() and
getdents(), readlink() and readlinkat(), unlink() and
unlinkat(), whereas pipe() might not be available, but
pipe2() always is, exclusively or not.
Seen on Fedora 34: newfstatat() is used on top of fstat().
syslog() is an actual system call on some glibc/arch combinations,
instead of a connect()/send() implementation.
On ppc64 and ppc64le, _llseek(), recv(), send() and getuid()
are used. For ppc64 only: ugetrlimit() for the getrlimit()
implementation, plus sigreturn() and fcntl64().
On s390x, additionally, we need to allow socketcall() (on top
of socket()), and sigreturn() also for passt (not just for
pasta).
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Seen on PPC with some older kernel versions: we seemingly have bytes
left to read from the returned array of dirent structs, but d_reclen
is zero: this, and all the subsequent entries, are not valid.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This is the only remaining Linux-specific include -- drop it to avoid
clang-tidy warnings and to make code more portable.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
...mostly false positives, but a number of very relevant ones too,
in tcp_get_sndbuf(), tcp_conn_from_tap(), and siphash PREAMBLE().
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Unions and structs, you all have names now.
Take the chance to enable bugprone-reserved-identifier,
cert-dcl37-c, and cert-dcl51-cpp checkers in clang-tidy.
Provide a ffsl() weak declaration using gcc built-in.
Start reordering includes, but that's not enough for the
llvm-include-order checker yet.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
A mix of unchecked return values, a missing permission mask for
open(2) with O_CREAT, and some false positives from
-Wstringop-overflow and -Wmaybe-uninitialized.
Reported-by: Martin Hauke <mardnh@gmx.de>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Replace libc functions that might dynamically allocate memory with own
implementations or wrappers.
Drop brk(2) from list of allowed syscalls in seccomp profile.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
