We can find the same function to compute the IPv4 header
checksum in tcp.c, udp.c and tap.c
Use the function defined for tap.c, csum_ip4_header(), but
with the code used in tcp.c and udp.c as it doesn't need a fully
initialiazed IPv4 header, only protocol, tot_len, saddr and daddr.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-ID: <20240303135114.1023026-7-lvivier@redhat.com>
[dwg: Fix weird cppcheck regression; it appears to be a problem
in pre-existing code, but somehow this patch is exposing it]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
in udp_update_hdr4():
Assign the source address to src, either b->s_in.sin_addr,
c->ip4.dns_match or c->ip4.gw and then set b->iph.saddr to src->s_addr.
in udp_update_hdr6():
Assign the source address to src, either b->s_in6.sin6_addr,
c->ip6.dns_match, c->ip6.gw or c->ip6.addr_ll.
Assign the destination to dst, either c->ip6.addr_seen or
&c->ip6.addr_ll_seen.
Then set dst to b->ip6h.daddr and src to b->ip6h.saddr.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-ID: <20240303135114.1023026-6-lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Introduce ip.[ch] file to encapsulate IP protocol handling functions and
structures. Modify various files to include the new header ip.h when
it's needed.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-ID: <20240303135114.1023026-5-lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Introduce the function csum_unfolded() that computes the unfolded
32-bit checksum of a data buffer, and call it from csum() that returns
the folded value.
Introduce csum_iov() that computes the checksum using csum_folded() on
all vectors of the iovec array and returns the folded result.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-ID: <20240303135114.1023026-4-lvivier@redhat.com>
[dwg: Fixed trivial cppcheck & clang-tidy regressions]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If buffer is not aligned use sum_16b() only on the not aligned
part, and then use csum_avx2() on the remaining part
Remove unneeded now function csum_unaligned().
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-ID: <20240303135114.1023026-3-lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Introduce a new function pcap_iov() to capture packet desribed by an IO
vector.
Update pcap_frame() to manage iovcnt > 1.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-ID: <20240303135114.1023026-2-lvivier@redhat.com>
[dwg: Fixed trivial cppcheck regressions]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently port_fwd.[ch] contains helpers related to port forwarding,
particular automatic port forwarding. We're planning to allow much more
flexible sorts of forwarding, including both port translation and NAT based
on the flow table. This will subsume the existing port forwarding logic,
so rename port_fwd.[ch] to fwd.[ch] with matching updates to all the names
within.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
port_fwd_scan_udp() handles UDP, as the name suggests, but its
function comment has the wrong function name and references TCP, due
to a bad copy-paste from port_fwd_scan_tcp().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The "tap" interface, whether it's actually a tuntap device or a qemu
socket, presents a virtual external link between different network hosts.
Hence, loopback addresses make no sense there. However, nothing prevents
the guest from putting bogus packets with loopback addresses onto the
interface and it's not entirely clear what effect that will have on passt.
Explicitly test for such packets and drop them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
TCP connections should typically not have wildcard addresses (0.0.0.0
or ::) nor a zero port number for either endpoint. It's not entirely
clear (at least to me) if it's strictly against the RFCs to do so, but
at any rate the socket interfaces often treat those values
specially[1], so it's not really possible to manipulate such
connections. Likewise they should not have broadcast or multicast
addresses for either endpoint.
However, nothing prevents a guest from creating a SYN packet with such
values, and it's not entirely clear what the effect on passt would be.
To ensure sane behaviour, explicitly check for this case and drop such
packets, logging a debug warning (we don't want a higher level,
because that would allow a guest to spam the logs).
We never expect such an address on an accept()ed socket either, but
just in case, check for it as well.
[1] Depending on context as "unknown", "match any" or "kernel, pick
something for me"
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
tcp_listen_handler() uses the epoll reference for the listening socket
it handles, and also passes on one variant of it to
tcp_tap_conn_from_sock() and tcp_splice_conn_from_sock(). The latter
two functions only need a couple of specific fields from the
reference.
Pass those specific values instead of the whole reference, which
localises the handling of the listening (as opposed to accepted)
socket and its reference entirely within tcp_listen_handler().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This makes several tweaks to improve the logic which decides whether
we're able to use the splice method for a new connection.
* Rather than only calling tcp_splice_conn_from_sock() in pasta mode, we
check for pasta mode within it, better localising the checks.
* Previously if we got a connection from a non-loopback address we'd
always fall back to the "tap" path, even if the connection was on a
socket in the namespace. If we did get a non-loopback address on a
namespace socket, something has gone wrong and the "tap" path certainly
won't be able to handle it. Report the error and close, rather than
passing it along to tap.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This makes a number of changes to improve error reporting while
connecting a new spliced socket:
* We use flow_err() and similar functions so all messages include info
on which specific flow was affected
* We use strerror() to interpret raw error values
* We now report errors on connection (at "trace" level, since this would
allow spamming the logs)
* We also look up and report some details on EPOLLERR events, which can
include connection errors, since we use a non-blocking connect(). Again
we use "trace" level since this can spam the logs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently creating the connected socket for a splice is split between
tcp_splice_conn_from_sock(), which opens the socket, and
tcp_splice_connect() which connects it. Alter tcp_splice_connect() to
open its own socket based on an address family and pif we pass it.
This does require a second conditional on pif, but makes for a more
logical split of functionality: tcp_splice_conn_from_sock() picks the
target, tcp_splice_connect() creates the connection. While we're
there improve reporting of errors
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The only caller of tcp_splice_new() is tcp_splice_conn_from_sock().
Both are quite short, and the division of responsibilities between the
two isn't particularly obvious. Simplify by merging the former into
the latter.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In tcp_splice_conn_from_sock(), the 'port' variable stores the source
port of the connection on the originating side. In tcp_splice_new(),
called directly from it, the 'port' parameter gives the _destination_
port of the originating connection and is then updated to the
destination port of the connection on the other side.
Similarly, in tcp_splice_conn_from_sock(), 's' is the fd of the
accetped socket (on side 0), whereas in tcp_splice_new(), 's' is the
fd of the connecting socket (side 1).
I, for one, find having the same variable name with different meanings
in such close proximity in the flow of control pretty confusing.
Alter the names for greater specificity and clarity.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Our allocation scheme for flow entries means there are some
non-obvious constraints on when what things can be done with an entry.
Add a big doc comment explaining the life cycle.
In addition, make a FLOW_START() macro to mark one of the important
transitions. This encourages correct usage, by making it natural to
only access the flow type specific structure after calling it. It
also logs that a new flow has been created, which is useful for
debugging.
We also add logging when a flow's lifecycle ends. This doesn't need a
new helper, because it can only happen either from flow_alloc_cancel()
or from the flow deferred handler.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In tcp_splice_conn_from_sock() we can call flow_trace() if there's an
error setting TCP_QUICKACK. However, we do so before we've set the
flow type in the flow entry. That means that flow_trace() will print
nonsense when it tries to print the flow type.
There's no reason the setsockopt() has to happen before initialising
the flow entry, so just move it after.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently tcp_splice_flow_defer() contains specific logic to determine
if we're far enough initialised that we need to close pipes and/or
sockets. This is potentially fragile if we change something about the
order in which we do things. We can simplify this by initialising the
pipe and socket fields to -1 very early, then close()ing them if and
only if they're non-negative.
This lets us remove a special case cleanup if our connect() fails.
This will already trigger a CLOSING event, and the socket fd in
question is populated in the connection structure. Thus we can let
the new cleanup logic handle it rather than requiring an explicit
close().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Each flow already has a type field. This implies the protocol the
flow represents, but also has more information: we have two ways to
represent TCP flows, "tap" and "spliced". In order to generalise some
of the flow mechanics, we'll need to determine a flow's protocol in
terms of the IP (L4) protocol number.
Introduce a constant table and helper macro to derive this from the flow
type.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The epoll references for both TCP listening sockets and UDP sockets
includes a port number. This gives the destination port that traffic
to that socket will be sent to on the other side. That will usually
be the same as the socket's bound port, but might not if the -t, -u,
-T or -U options are given with different original and forwarded port
numbers.
As we move towards a more flexible forwarding model for passt, it's
going to become possible for that destination port to vary depending
on more things (for example the source or destination address). So,
it will no longer make sense to have a fixed value for a listening
socket.
Change to simpler semantics where this field in the reference gives
the bound port of the socket. We apply the translations to the
correct destination port later on, when we're actually forwarding.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The IN4_IS_*() macros expect a pointer to a struct in_addr. That
makes sense, but sometimes we have an IPv4 address as a void * pointer
or union type which makes these less convenient. Additionally, this
doesn't match the behaviour of the standard library's IN6_IS_*()
macros on which they're modelled, nor our own IN4_ARE_ADDR_EQUAL().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There are a number of places where we want to handle either a
sockaddr_in or a sockaddr_in6. In some of those we use a void *,
which works ok and matches some standard library interfaces, but
doesn't give a signature level hint that we're dealing with only
sockaddr_in or sockaddr_in6, not (say) sockaddr_un or another type of
socket address. Other places we use a sockaddr_storage, which also
works, but has the same problem in addition to allocating more on the
stack than we need to.
Introduce union sockaddr_inany to explictly handle this case: it has
variants for sockaddr_in and sockaddr_in6. Use it in a number of
places where it's easy to do so.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Our inany_addr type is used in some places to represent either IPv4 or
IPv6 addresses, and we plan to use it more widely. We don't yet
provide constants of this type for special addresses (loopback and
"any"). Add some of these, both the IPv4 and IPv6 variants of those
addresses, but typed as union inany_addr.
To avoid actually adding more things to .data we can use some macros and
casting to overlay the IPv6 versions of these with the standard library's
in6addr_loopback and in6addr_any. For the IPv4 versions we need to create
new constant globals.
For complicated historical reasons, the standard library doesn't
provide constants for IPv4 loopback and any addresses as struct
in_addr. It just has macros of type in_addr_t == uint32_t, which has
some gotchas w.r.t. endianness. We can use some more macros to
address this lack, using macros to effectively create these IPv4
constants as pieces of the inany constants above.
We use this last to avoid some awkward temporary variables just used
to get an address of an IPv4 loopback address.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Add this helper to format an inany into either IPv4 or IPv6 text
format as appropriate.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Add helpers to determine if an inany is loopback, unspecified or
multicast, regardless of whether it's a "true" IPv6 address or an IPv4
address represented as v4-mapped.
Use the loopback helper to simplify tcp_splice_conn_from_sock() slightly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
When we determine we have sent a partial frame in tap_send_frames_passt(),
we call tap_send_remainder() to send the remainder of it. The logic in
that function is very similar to that in the more general write_remainder()
except that it uses send() instead of write()/writev(). But we are dealing
specifically with the qemu socket here, which is a connected stream socket.
In that case write()s do the same thing as send() with the options we were
using, so we can just reuse write_remainder().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently pcap_frame() assumes that if write() doesn't return an error, it
has written everything we want. That's not necessarily true, because it
could return a short write. That's not likely to happen on a regular file,
but there's not a lot of reason not to be robust here; it's conceivable we
might want to direct the pcap fd at a named pipe or similar.
So, make pcap_frame() handle short frames by using the write_remainder()
helper.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Formatting fix, and avoid gcc warning in pcap_frame()]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We have several places where we want to write(2) a buffer or buffers and we
handle short write()s by retrying until everything is successfully written.
Add a helper for this in util.c.
This version has some differences from the typical write_all() function.
First, take an IO vector rather than a single buffer, because that will be
useful for some of our cases. Second, allow it to take an parameter to
skip the first n bytes of the given buffers. This will be useful for some
of the cases we want, and also falls out quite naturally from the
implementation.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Minor formatting fixes in write_remainder()]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Update the low-level helper pcap_frame() to take a struct iovec and
offset within it, rather than an explicit pointer and length for the
frame. This moves the handling of an offset (to skip vnet_len) from
pcap_multiple() to pcap_frame().
This doesn't accomplish a great deal immediately, but will make
subsequent changes easier.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Several of the IOV functions in iov.c, and also tap_send_frames_passt()
needs to determine which buffer element a byte offset into an IO vector
lies in. Split this out into a helper function iov_skip_bytes().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Introduce functions to copy to/from a buffer from/to an iovec array,
to compute data length in in bytes of an iovec and to copy memory from
an iovec to another.
iov_from_buf(), iov_to_buf(), iov_size(), iov_copy().
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-ID: <20240217150725.661467-2-lvivier@redhat.com>
[dwg: Small changes to suppress cppcheck warnings]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If the configured output address is unspecified, we don't set the bind
address to it when creating a new socket in udp_tap_handler(). That sounds
sensible, but what we're leaving the bind address as is, exactly, the
unspecified address, so this test makes no difference. Remove it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
When forwarding IPv4 packets in udp_tap_handler(), we incorrectly use an
IPv6 address test on our IPv4 address (which could cause an out of bounds
access), and possibly set our bind interface to the IPv6 interface based on
it. Adjust to correctly look at the IPv4 address and IPv4 interface.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Streamline the logic here slightly, by introducing a 'src' temporary for
brevity. We also transform the logic for setting/clearing PORT_LOOPBACK.
This makes udp_update_hdr4() more closely match the corresponding logic
from udp_update_udp6().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The udp_epoll_ref contains a field for the pif to which the socket belongs.
We fill this in for permanent sockets created with udp_sock_init() and for
spliced sockets, however, we omit it for ephemeral sockets created for
tap originated flows.
This is a bug, although we currently get away with it, because we don't
consult that field for such flows. Correctly fill it in.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If an incoming packet has a source address of 0.0.0.0 we translate that to
the gateway address. This doesn't really make sense, because we have no
way to do a reverse translation for reply packets.
Certain UDP protocols do use an unspecified source address in some
circumstances (e.g. DHCP). These generally either require no reply, a
multicast reply, or provide a suitable reply address by other means.
In none of those cases does translating it in passt/pasta make sense. The
best we can really do here is just leave it as is.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
...instead of implying that by stating that there's no routable
interface for a given IP version. There might be interfaces with
non-default routes.
Suggested-by: Paul Holzinger <pholzing@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Paul Holzinger <pholzing@redhat.com>
Don't run cppcheck to find out if the --check-level=exhaustive option
is available, unless we're actually going to run cppcheck later.
To avoid this, move this check under the cppcheck target, and
implement it in shell script instead of using Makefile directives,
because we can't easily implement conditionals in recipes.
Reported-by: Rahil Bhimjiani <me@rahil.website>
Link: https://bugs.gentoo.org/920795
Fixes: 8640d62af7 ("cppcheck: Use "exhaustive" level checking when available")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
--quiet is supposed to silence the "No routable interface" message but
it does not work because the log level was set long after conf_ip4/6()
was called which means it uses the default level which logs everything.
To address this move the log level logic directly after the option
parsing in conf().
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If tcp_sock_refill_pool() gets an error opening new sockets, it stores the
negative errno of that error in the socket pool. This isn't especially
useful:
* It's inconsistent with the initial state of the pool (all -1)
* It's inconsistent with the state of an entry that was valid and was
then consumed (also -1)
* By the time we did anything with this error code, it's now far removed
from the situation in which the error occurred, making it difficult to
report usefully
We now have error reporting closer to when failures happen on the refill
paths, so just leave a pool slot we can't fill as -1.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We maintain pools of ready-to-connect sockets in both the original and
(for pasta) guest namespace to reduce latency when starting new TCP
connections. If we exhaust those pools we have to take a higher
latency path to get a new socket.
Currently we open-code that fallback in the places we need it. To improve
clarity encapsulate that into helper functions. While we're at it, give
those helpers clearer error reporting.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently if tcp_sock_refill_pool() is unable to fill all the slots in the
pool, it will silently exit. This might lead to a later attempt to get
fds from the pool to fail at which point it will be harder to tell what
originally went wrong.
Instead add warnings if we're unable to refill any of the socket pools when
requested. We have tcp_sock_refill_pool() return an error and report it
in the callers, because those callers have more context allowing for a
more useful message.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently if we get an error opening a new socket while refilling a socket
pool, we carry on to the next slot and try again. This isn't very useful,
since by far the most likely cause of an error is some sort of resource
exhaustion. Trying again will probably just hit the same error, and maybe
even make things worse.
So, instead stop on the first error while refilling the pool, making do
with however many sockets we managed to open before the error.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently tcp_sock_refill_pool() stops as soon as it finds an entry in the
pool with a valid fd. This appears to makes sense: we always use fds from
the front of the pool, so if we find a filled one, the rest of the pool
should be filled as well.
However, that's not quite correct. If a previous refill hit errors trying
to open new sockets, it could leave gaps between blocks of valid fds. We're
going to add some changes that could make that more likely.
So, for robustness, instead skip over the filled entry but still try to
refill the rest of the array. We expect simply iterating over the pool to
be of small cost compared to even a single system call, so this shouldn't
have much impact.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Sometimes we use sa_family_t for variables and parameters containing a
socket address family, other times we use a plain int. Since sa_family_t
is what's actually used in struct sockaddr and friends, standardise on
that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The code in udp_invert_portmap() is written based on an incorrect
understanding of C's (arcane) integer promotion rules. We calculate
'(in_port_t)i + delta' expecting the result to be of type in_port_t (16
bits). However "small integer types" (those narrower than 'int') are
always promoted to int for expressions, meaning this calculation can
overrun the rdelta[] array.
Fix this, and use a new intermediate for the index, to make it very clear
what it's type is. We also change i to unsigned, to avoid any possible
confusion from mixing signed and unsigned types.
Link: https://bugs.passt.top/show_bug.cgi?id=80
Reported-by: Laurent Jacquot <jk@lutty.net>
Suggested-by: Laurent Jacquot <jk@lutty.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
All the values in this ASSERT() are known at compile time, so this can be
converted to a static_assert().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We watch network namespace entries to detect when we should quit
(unless --no-netns-quit is passed), and these might stored in a tmpfs
typically mounted at /run/user/UID or /var/run/user/UID, or found in
procfs at /proc/PID/ns/.
Currently, we try to use inotify for any possible location of those
entries, but inotify, of course, doesn't work on pseudo-filesystems
(see inotify(7)).
The man page reflects this: the description of --no-netns-quit
implies that we won't quit anyway if the namespace is not "bound to
the filesystem".
Well, we won't quit, but, since commit 9e0dbc8948 ("More
deterministic detection of whether argument is a PID, PATH or NAME"),
we try. And, indeed, this is harmless, as the caveat from that
commit message states.
Now, it turns out that Buildah, a tool to create container images,
sharing its codebase with Podman, passes a procfs entry to pasta, and
expects pasta to exit once the network namespace is not needed
anymore, that is, once the original container process, also spawned
by Buildah, terminates.
Get this to work by using the timer fallback mechanism if the
namespace name is passed as a path belonging to a pseudo-filesystem.
This is expected to be procfs, but I covered sysfs and devpts
pseudo-filesystems as well, because nothing actually prevents
creating this kind of directory structure and links there.
Note that fstatfs(), according to some versions of man pages, was
apparently "deprecated" by the LSB. My reasoning for using it is
essentially this:
https://lore.kernel.org/linux-man/f54kudgblgk643u32tb6at4cd3kkzha6hslahv24szs4raroaz@ogivjbfdaqtb/t/#u
...that is, there was no such thing as an LSB deprecation, and
anyway there's no other way to get the filesystem type.
Also note that, while it might sound more obvious to detect the
filesystem type using fstatfs() on the file descriptor itself
(c->pasta_netns_fd), the reported filesystem type for it is nsfs, no
matter what path was given to pasta. If we use the parent directory,
we'll typically have either tmpfs or procfs reported.
If the target namespace is given as a PID, or as a PID-based procfs
entry, we don't risk races if this PID is recycled: our handle on
/proc/PID/ns will always refer to the original namespace associated
with that PID, and we don't re-open this entry from procfs to check
it.
There's, however, a remaining race possibility if the parent process
is not the one associated to the network namespace we operate on: in
that case, the parent might pass a procfs entry associated to a PID
that was recycled by the time we parse it. This can't happen if the
namespace PID matches the one of the parent, because we detach from
the controlling terminal after parsing the namespace reference.
To avoid this type of race, if desired, we could add the option for
the parent to pass a PID file descriptor, that the parent obtained
via pidfd_open(). This is beyond the scope of this change.
Update the man page to reflect that, even if the target network
namespace is passed as a procfs path or a PID, we'll now quit when
the procfs entry is gone.
Reported-by: Paul Holzinger <pholzing@redhat.com>
Link: https://github.com/containers/podman/pull/21563#issuecomment-1948200214
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
