tap_send_frames() takes a vector of buffers and requires exactly one frame
per buffer. We have future plans where we want to have multiple buffers
per frame in some circumstances, so extend tap_send_frames() to take the
number of buffers per frame as a parameter.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Improve comment to rembufs calculation]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently we open code the calculation of the UDP checksum in
udp_update_hdr6(). We calling a helper to handle the IPv6 pseudo-header,
and preset the checksum field to 0 so an uninitialised value doesn't get
folded in. We already have a helper to do this: csum_udp6() which we use
in some slow paths. Use it here as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We carry around the source address as a pointer to a constant struct
in_addr. But it's silly to carry around a 4 or 8 byte pointer to a 4 byte
IPv4 address. Just copy the IPv4 address around by value.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The order of things in these functions is a bit odd for historical reasons.
We initialise some IP header fields early, the more later after making
some tests. Likewise we declare some variables without initialisation,
but then unconditionally set them to values we could calculate at the
start of the function.
Previous cleanups have removed the reasons for some of these choices, so
reorder for clarity, and where possible move the first assignment into an
initialiser.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
These functions take an index to the L2 buffer whose header information to
update. They use that for two things: to locate the buffer pointer itself,
and to retrieve the length of the received message from the paralllel
udp[46]_l2_mh_sock array. The latter is arguably a failure to separate
concerns. Change these functions to explicitly take a buffer pointer and
payload length as parameters.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In these functions we have 'dstport' for the destination port, but
'src_port' for the source port. Change the latter to 'srcport' for
consistency.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Each of these functions have 3 essentially identical loops in a row.
Merge the loops into a single common udp_sock_iov_init() function, calling
udp_sock[46]_iov_init_one() helpers to initialize each "slot" in the
various parallel arrays. This is slightly neater now, and more naturally
allows changes we want to make where more initialization will become common
between IPv4 and IPv6.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Use ethhdr rather than tap_hdr.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-ID: <20240303135114.1023026-9-lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The TCP and UDP checksums are computed using the data in the TCP/UDP
payload but also some informations in the IP header (protocol,
length, source and destination addresses).
We add two functions, proto_ipv4_header_psum() and
proto_ipv6_header_psum(), to compute the checksum of the IP
header part.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-ID: <20240303135114.1023026-8-lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We can find the same function to compute the IPv4 header
checksum in tcp.c, udp.c and tap.c
Use the function defined for tap.c, csum_ip4_header(), but
with the code used in tcp.c and udp.c as it doesn't need a fully
initialiazed IPv4 header, only protocol, tot_len, saddr and daddr.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-ID: <20240303135114.1023026-7-lvivier@redhat.com>
[dwg: Fix weird cppcheck regression; it appears to be a problem
in pre-existing code, but somehow this patch is exposing it]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
in udp_update_hdr4():
Assign the source address to src, either b->s_in.sin_addr,
c->ip4.dns_match or c->ip4.gw and then set b->iph.saddr to src->s_addr.
in udp_update_hdr6():
Assign the source address to src, either b->s_in6.sin6_addr,
c->ip6.dns_match, c->ip6.gw or c->ip6.addr_ll.
Assign the destination to dst, either c->ip6.addr_seen or
&c->ip6.addr_ll_seen.
Then set dst to b->ip6h.daddr and src to b->ip6h.saddr.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-ID: <20240303135114.1023026-6-lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Introduce ip.[ch] file to encapsulate IP protocol handling functions and
structures. Modify various files to include the new header ip.h when
it's needed.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-ID: <20240303135114.1023026-5-lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently port_fwd.[ch] contains helpers related to port forwarding,
particular automatic port forwarding. We're planning to allow much more
flexible sorts of forwarding, including both port translation and NAT based
on the flow table. This will subsume the existing port forwarding logic,
so rename port_fwd.[ch] to fwd.[ch] with matching updates to all the names
within.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The epoll references for both TCP listening sockets and UDP sockets
includes a port number. This gives the destination port that traffic
to that socket will be sent to on the other side. That will usually
be the same as the socket's bound port, but might not if the -t, -u,
-T or -U options are given with different original and forwarded port
numbers.
As we move towards a more flexible forwarding model for passt, it's
going to become possible for that destination port to vary depending
on more things (for example the source or destination address). So,
it will no longer make sense to have a fixed value for a listening
socket.
Change to simpler semantics where this field in the reference gives
the bound port of the socket. We apply the translations to the
correct destination port later on, when we're actually forwarding.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Our inany_addr type is used in some places to represent either IPv4 or
IPv6 addresses, and we plan to use it more widely. We don't yet
provide constants of this type for special addresses (loopback and
"any"). Add some of these, both the IPv4 and IPv6 variants of those
addresses, but typed as union inany_addr.
To avoid actually adding more things to .data we can use some macros and
casting to overlay the IPv6 versions of these with the standard library's
in6addr_loopback and in6addr_any. For the IPv4 versions we need to create
new constant globals.
For complicated historical reasons, the standard library doesn't
provide constants for IPv4 loopback and any addresses as struct
in_addr. It just has macros of type in_addr_t == uint32_t, which has
some gotchas w.r.t. endianness. We can use some more macros to
address this lack, using macros to effectively create these IPv4
constants as pieces of the inany constants above.
We use this last to avoid some awkward temporary variables just used
to get an address of an IPv4 loopback address.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If the configured output address is unspecified, we don't set the bind
address to it when creating a new socket in udp_tap_handler(). That sounds
sensible, but what we're leaving the bind address as is, exactly, the
unspecified address, so this test makes no difference. Remove it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
When forwarding IPv4 packets in udp_tap_handler(), we incorrectly use an
IPv6 address test on our IPv4 address (which could cause an out of bounds
access), and possibly set our bind interface to the IPv6 interface based on
it. Adjust to correctly look at the IPv4 address and IPv4 interface.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Streamline the logic here slightly, by introducing a 'src' temporary for
brevity. We also transform the logic for setting/clearing PORT_LOOPBACK.
This makes udp_update_hdr4() more closely match the corresponding logic
from udp_update_udp6().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The udp_epoll_ref contains a field for the pif to which the socket belongs.
We fill this in for permanent sockets created with udp_sock_init() and for
spliced sockets, however, we omit it for ephemeral sockets created for
tap originated flows.
This is a bug, although we currently get away with it, because we don't
consult that field for such flows. Correctly fill it in.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If an incoming packet has a source address of 0.0.0.0 we translate that to
the gateway address. This doesn't really make sense, because we have no
way to do a reverse translation for reply packets.
Certain UDP protocols do use an unspecified source address in some
circumstances (e.g. DHCP). These generally either require no reply, a
multicast reply, or provide a suitable reply address by other means.
In none of those cases does translating it in passt/pasta make sense. The
best we can really do here is just leave it as is.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Sometimes we use sa_family_t for variables and parameters containing a
socket address family, other times we use a plain int. Since sa_family_t
is what's actually used in struct sockaddr and friends, standardise on
that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The code in udp_invert_portmap() is written based on an incorrect
understanding of C's (arcane) integer promotion rules. We calculate
'(in_port_t)i + delta' expecting the result to be of type in_port_t (16
bits). However "small integer types" (those narrower than 'int') are
always promoted to int for expressions, meaning this calculation can
overrun the rdelta[] array.
Fix this, and use a new intermediate for the index, to make it very clear
what it's type is. We also change i to unsigned, to avoid any possible
confusion from mixing signed and unsigned types.
Link: https://bugs.passt.top/show_bug.cgi?id=80
Reported-by: Laurent Jacquot <jk@lutty.net>
Suggested-by: Laurent Jacquot <jk@lutty.net>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
All the values in this ASSERT() are known at compile time, so this can be
converted to a static_assert().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Usually automatically forwarded UDP outbound ports are set up by
udp_port_rebind_outbound() called from udp_timer(). However, the very
first time they're created and bound is by udp_sock_init_ns() called from
udp_init(). udp_sock_init_ns() is essentially an unnecessary cut down
version of udp_port_rebind_outbound(), so we can jusat remove it.
Doing so does require moving udp_init() below udp_port_rebind_outbound()'s
definition.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
For automated inbound port forwarding in pasta mode we scan bound ports
within the guest namespace via /proc and bind matching ports on the host to
listen for packets. For UDP this is usually handled by udp_timer() which
calls port_fwd_scan_udp() followed by udp_port_rebind(). However there's
one initial scan before the the UDP timer is started: we call
port_fwd_scan_udp() from port_fwd_init(), and actually bind the resulting
ports in udp_sock_init_init() called from udp_init().
Unfortunately, the version in udp_sock_init_init() isn't correct. It
unconditionally opens a new socket for every forwarded port, even if a
socket has already been explicit created with the -u option. If the
explicitly forwarded ports have particular configuration (such as a
specific bound address address, or one implied by the -o option) those will
not be replicated in the new socket. We essentially leak the original
correctly configured socket, replacing it with one which might not be
right.
We could make udp_sock_init_init() use udp_port_rebind() to get that right,
but there's actually no point doing so:
* The initial bind was introduced by ccf6d2a7b4 ("udp: Actually bind
detected namespace ports in init namespace") at which time we didn't
periodically scan for bound UDP ports. Periodic scanning was introduced
in 457ff122e ("udp,pasta: Periodically scan for ports to automatically
forward") making the bind from udp_init() redundant.
* At the time of udp_init(), programs in the guest namespace are likely
not to have started yet (unless attaching a pre-existing namespace) so
there's likely not anything to scan for anyway.
So, simply remove the initial, broken socket create/bind, allowing
automatic port forwards to be created the first time udp_timer() runs.
Reported-by: Laurent Jacquot <jk@lutty.net>
Suggested-by: Laurent Jacquot <jk@lutty.net>
Link: https://bugs.passt.top/show_bug.cgi?id=79
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In a number of places we pass around a struct timespec representing the
(more or less) current time. Sometimes we call it 'now', and sometimes we
call it 'ts'. Standardise on the more informative 'now'.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Sufficiently recent cppcheck (I'm using 2.13.0) seems to have added another
warning for pointer variables which could be pointer to const but aren't.
Use this to make a bunch of variables const pointers where they previously
weren't for no particular reason.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
sock_l4() takes NULL for ifname if you don't want to bind the socket to a
particular interface. However, for a number of the callers, it's more
natural to use an empty string for that case. Change sock_l4() to accept
either NULL or an empty string equivalently, and simplify some callers
using that change.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
IPv4 addresses can be stored in an in_addr_t or a struct in_addr. The
former is just a type alias to a 32-bit integer, so doesn't really give us
any type checking. Therefore we generally prefer the structure, since we
mostly want to treat IP address as opaque objects. Fix a few places where
we still use in_addr_t, but can just as easily use struct in_addr.
Note there are still some uses of in_addr_t in conf.c, but those are
justified: since they're doing prefix calculations, they actually need to
look at the internals of the address as an integer.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We already define IN4ADDR_LOOPBACK_INIT to initialise a struct in_addr to
the loopback address without delving into its internals. However there are
some places we don't use it, and explicitly look at the internal structure
of struct in_addr, which we generally want to avoid. Use the define more
widely to avoid that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
When pasta periodically scans bound ports and binds them on the other
side in order to forward traffic, we bind UDP ports for corresponding
TCP port numbers, too, to support protocols and applications such as
iperf3 which use UDP port numbers matching the ones used by the TCP
data connection.
If we scan UDP ports in order to bind UDP ports, we skip detection of
the UDP ports we already bound ourselves, to avoid looping back our
own ports. Same with scanning and binding TCP ports.
But if we scan for TCP ports in order to bind UDP ports, we need to
skip bound TCP ports too, otherwise, as David pointed out:
- we find a bound TCP port on side A, and bind the corresponding TCP
and UDP ports on side B
- at the next periodic scan, we find that UDP port bound on side B,
and we bind the corresponding UDP port on side A
- at this point, we unbind that UDP port on side B: we would
otherwise loop back our own port.
To fix this, we need to avoid binding UDP ports that we already
bound, on the other side, as a consequence of finding a corresponding
bound TCP port.
Reproducing this issue is straightforward:
./pasta -- iperf3 -s
# Wait one second, then from another terminal:
iperf3 -c ::1 -u
Reported-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Analysed-by: David Gibson <david@gibson.dropbear.id.au>
Fixes: 457ff122e3 ("udp,pasta: Periodically scan for ports to automatically forward")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
pasta supports automatic port forwarding, where we look for listening
sockets in /proc/net (in both namespace and outside) and establish port
forwarding to match.
For TCP we do this scan both at initial startup, then periodically
thereafter. For UDP however, we currently only scan at start. So unlike
TCP we won't update forwarding to handle services that start after pasta
has begun.
There's no particular reason for that, other than that we didn't implement
it. So, remove that difference, by scanning for new UDP forwards
periodically too. The logic is basically identical to that for TCP, but it
needs some changes to handle the mildly different data structures in the
UDP case.
Link: https://bugs.passt.top/show_bug.cgi?id=45
Link: https://github.com/rootless-containers/rootlesskit/issues/383
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We save sockets bound to particular ports in udp_{tap,splice}_map for
reuse later. If they're not used for a time, we time them out and close
them. However, when that happened, we weren't actually removing the fds
from the relevant map. That meant that later interactions on the same port
could get a stale fd from the map.
The stale fd might be closed, leading to unexpected EBADF errors, or it
could have been re-used by a completely different socket bound to a
different port, which could lead to us incorrectly forwarding packets.
Reported-by: Chris Kuhn <kuhnchris@kuhnchris.eu>
Reported-by: Jay <bugs.passt.top@bitsbetwixt.com>
Link: https://bugs.passt.top/show_bug.cgi?id=57
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
udp uses the udp_tap_map, udp_splice_ns and udp_splice_init tables to keep
track of already opened sockets bound to specific ports. We need a way to
indicate entries where a socket hasn't been opened, but the code isn't
consistent if this is indicated by a 0 or a -1:
* udp_splice_sendfrom() and udp_tap_handler() assume that 0 indicates
an unopened socket
* udp_sock_init() fills in -1 for a failure to open a socket
* udp_timer_one() is somewhere in between, treating only strictly
positive fds as valid
-1 (or, at least, negative) is really the correct choice here, since 0 is
a theoretically valid fd value (if very unlikely in practice). Change to
use that consistently throughout.
The table does need to be initialised to all -1 values before any calls to
udp_sock_init() which can happen from conf_ports(). Because C doesn't make
it easy to statically initialise non zero values in large tables, this does
require a somewhat awkward call to initialise the table from conf(). This
is the best approach I could see for the short term, with any luck it will
go away at some point when those socket tables are replaced by a unified
flow table.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
For now, packets passed to the various *_tap_handler() functions always
come from the single "tap" interface. We want to allow the possibility to
broaden that in future. As preparation for that, have the code in tap.c
pass the pif id of the originating interface to each of those handler
functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
For certain socket types, we record in the epoll ref whether they're
sockets in the namespace, or on the host. We now have the notion of "pif"
to indicate what "place" a socket is associated with, so generalise the
simple one-bit 'ns' to a pif id.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
udp_sock_init() has a number of paths that initialise uref differently.
However some of the fields are initialised the same way in all of them.
Move those fields into the original initialiser to save a few lines.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Newer versions of cppcheck (as of 2.12.0, at least) added a warning for
pointers which could be declared to point at const data, but aren't.
Based on that, make many pointers throughout the codebase const.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In both tap4_handler() and tap6_handler(), once we've sorted incoming l3
packets into "sequences", we then step through all the packets in each DUP
sequence calling udp_tap_handler(). Or so it appears.
In fact, udp_tap_handler() doesn't take an index and always starts with
packet 0 of the sequence, even if called repeatedly. It appears to be
written with the idea that the struct pool is a queue, from which it
consumes packets as it processes them, but that's not how the pool data
structure works.
Correct this by adding an index parameter to udp_tap_handler() and altering
the loops in tap.c to step through the pool properly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Because packets sent on the tap interface will always be going to the
guest/namespace, we more-or-less know what address they'll be going to. So
we pre-fill this destination address in our header buffers for IPv4. We
can't do the same for IPv6 because we could need either the global or
link-local address for the guest. In future we're going to want more
flexibility for the destination address, so this pre-filling will get in
the way.
Change the flow so we always fill in the IPv4 destination address for each
packet, rather than prefilling it from proto_update_l2_buf(). In fact for
TCP we already redundantly filled the destination for each packet anyway.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We partially prepopulate IP and TCP header structures including, amongst
other things the destination address, which for IPv4 is always the known
address of the guest/namespace. We partially precompute both the IPv4
header checksum and the TCP checksum based on this.
In future we're going to want more flexibility with controlling the
destination for IPv4 (as we already do for IPv6), so this precomputed value
gets in the way. Therefore remove the IPv4 destination from the
precomputed checksum and fold it into the checksum update when we actually
send a packet.
Doing this means we no longer need to recompute those partial sums when
the destination address changes ({tcp,udp}_update_l2_buf()) and instead
the computation can be moved to compile time. This means while we perform
slightly more computations on each packet, we slightly reduce the amount of
memory we need to access.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The tap code passes the IPv4 or IPv6 destination address of packets it
receives to the protocol specific code. Currently that protocol code
doesn't use the source address, but we want it to in future. So, in
preparation, pass the IPv4/IPv6 source address of tap packets to those
functions as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Move the test for c->no_udp into the function itself, rather than in the
dispatching switch statement to better localize the UDP specific logic, and
make for greated consistency with other handler functions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The epoll_ref type includes fields for the IP protocol of a socket, and the
socket fd. However, we already have a few things in the epoll which aren't
protocol sockets, and we may have more in future. Rename these fields to
an abstract "fd type" and file descriptor for more generality.
Similarly, rather than using existing IP protocol numbers for the type,
introduce our own number space. For now these just correspond to the
supported protocols, but we'll expand on that in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
ns_enter() returns an integer... but it's always zero. If we actually fail
the function doesn't return. Therefore it makes more sense for this to be
a function returning void, and we can remove the cases where we pointlessly
checked its return value.
In addition ns_enter() is usually called from an ephemeral thread created
by NS_CALL(). That means that the exit(EXIT_FAILURE) there usually won't
be reported (since NS_CALL() doesn't wait() for the thread). So, use die()
instead to print out some information in the unlikely event that our
setns() here does fail.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
union epoll_ref has a deeply nested set of structs and unions to let us
subdivide it into the various different fields we want. This means that
referencing elements can involve an awkward long string of intermediate
fields.
Using C11 anonymous structs and unions lets us do this less clumsily.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In practical terms, passt doesn't benefit from the additional
protection offered by the AGPL over the GPL, because it's not
suitable to be executed over a computer network.
Further, restricting the distribution under the version 3 of the GPL
wouldn't provide any practical advantage either, as long as the passt
codebase is concerned, and might cause unnecessary compatibility
dilemmas.
Change licensing terms to the GNU General Public License Version 2,
or any later version, with written permission from all current and
past contributors, namely: myself, David Gibson, Laine Stump, Andrea
Bolognani, Paul Holzinger, Richard W.M. Jones, Chris Kuhn, Florian
Weimer, Giuseppe Scrivano, Stefan Hajnoczi, and Vasiliy Ulyanov.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Commit 89e38f55 "treewide: Fix header includes to build with musl" added
extra #includes to work with musl. Unfortunately with the cppcheck version
I'm using (cppcheck-2.9-1.fc37.x86_64 in Fedora 37) this causes weird false
positives: specifically cppcheck seems to hit a #error in <bits/unistd.h>
complaining about including it directly instead of via <unistd.h> (which is
not something we're doing).
I have no idea why that would be happening; but I'm guessing it has to be
a bug in the cpp implementation in that cppcheck version. In any case,
it's possible to work around this by moving the include of <unistd.h>
before the include of <signal.h>. So, do that.
Fixes: 89e38f5540 ("treewide: Fix header includes to build with musl")
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
When I reworked udp_init() to move most of the port binding logic
to conf_ports, I accidentally dropped this bit of automatic port
detection (and binding) at start-up.
On -U auto, in pasta mode, udp_sock_init_ns() binds ports in the
namespace that correspond to ports bound in the init namespace,
but on -u auto, nothing actually happens after port detection.
Add udp_sock_init_init() to deal with this, and while at it fix
the comment to udp_sock_init_ns(): the latter takes care of
outbound "connections".
This is currently not covered by tests, and the UDP port needs to
be already bound in the namespace when pasta starts (periodic
detection for UDP is a missing feature at the moment). It can be
checked like this:
$ unshare -rUn
# echo $$
590092
# socat -u UDP-LISTEN:5555 STDOUT
$ pasta -q -u auto 590092
$ echo "test" | socat -u STDIN UDP:localhost:5555
Reported-by: Paul Holzinger <pholzing@redhat.com>
Fixes: 3c6ae62510 ("conf, tcp, udp: Allow address specification for forwarded ports")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The comments say we should return 0 on partial success, and an error
code on complete failure. Rationale: if the user configures a port
forwarding, and we succeed to bind that port for IPv4 or IPv6 only,
that might actually be what the user intended.
Adjust the two functions to reflect the comments.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
...starting from sock_l4(), pass negative error (errno) codes instead
of -1. They will only be used in two commits from now, no functional
changes intended here.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Roughly inspired from a patch by Chris Kuhn: fix up includes so that
we can build against musl: glibc is more lenient as headers generally
include a larger amount of other headers.
Compared to the original patch, I only included what was needed
directly in C files, instead of adding blanket includes in local
header files. It's a bit more involved, but more consistent with the
current (not ideal) situation.
Reported-by: Chris Kuhn <kuhnchris+github@kuhnchris.eu>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
I didn't notice earlier: libslirp (and slirp4netns) supports binding
outbound sockets to specific IPv4 and IPv6 addresses, to force the
source addresse selection. If we want to claim feature parity, we
should implement that as well.
Further, Podman supports specifying outbound interfaces as well, but
this is simply done by resolving the primary address for an interface
when the network back-end is started. However, since kernel version
5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for
non-root users"), we can actually bind to a specific interface name,
which doesn't need to be validated in advance.
Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses,
and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets
to given interfaces.
Given that it probably makes little sense to select addresses and
routes from interfaces different than the ones given for outbound
sockets, also assign those as "template" interfaces, by default,
unless explicitly overridden by '-i'.
For ICMP and UDP, we call sock_l4() to open outbound sockets, as we
already needed to bind to given ports or echo identifiers, and we
can bind() a socket only once: there, pass address (if any) and
interface (if any) for the existing bind() and setsockopt() calls.
For TCP, in general, we wouldn't otherwise bind sockets. Add a
specific helper to do that.
For UDP outbound sockets, we need to know if the final destination
of the socket is a loopback address, before we decide whether it
makes sense to bind the socket at all: move the block mangling the
address destination before the creation of the socket in the IPv4
path. This was already the case for the IPv6 path.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
When a ssize_t is an int:
udp.c: In function ‘udp_sock_handler’:
udp.c:774:23: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘ssize_t’ {aka ‘int’} [-Wsign-compare]
774 | for (i = 0; i < n; i += m) {
| ^
udp.c:781:43: warning: comparison of integer expressions of different signedness: ‘unsigned int’ and ‘ssize_t’ {aka ‘int’} [-Wsign-compare]
781 | for (m = 1; i + m < n; m++) {
|
Change 'i' and 'm' counters in udp_sock_handler() to signed versions,
to match ssize_t n.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Andrea reports that with a Fedora 37 guest running on a Fedora 37
host, both using systemd-resolved, with passt connecting them,
running with default options, DNS queries don't work.
systemd-resolved on the host is reachable only at the loopback
address 127.0.0.53.
We advertise the default gateway address to the guest as resolver,
because our local address is of course unreachable from there, which
means we see DNS queries directed to the default gateway, and we
redirect them to 127.0.0.1. However, systemd-resolved doesn't answer
on 127.0.0.1.
To fix this, set @dns_match to the address of the default gateway,
unless a different resolver address is explicitly configured, so that
we know we explicitly have to map DNS queries, in this case, to the
address of the local resolver.
This means that in udp_tap_handler() we need to check, first, if
the destination address of packets matches @dns_match: even if it's
the address of the local gateway, we want to map that to a specific
address, which isn't necessarily 127.0.0.1.
Do the same for IPv6 for consistency, even though IPv6 defines a
single loopback address.
Reported-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Instead of the address of the first resolver we advertise to
the guest or namespace.
This was one of the intentions behind commit 3a2afde87d ("conf,
udp: Drop mostly duplicated dns_send arrays, rename related fields"),
but I forgot to implement this part. In practice, they are usually
the same thing, unless /etc/resolv.conf points to a loopback address.
Fixes: 3a2afde87d ("conf, udp: Drop mostly duplicated dns_send arrays, rename related fields")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
passt supports ranges of forwarded ports as well as 'all' for TCP and
UDP, so it might be convenient to proceed if we fail to bind only
some of the desired ports.
But if we fail to bind even a single port for a given specification,
we're clearly, unexpectedly, conflicting with another network
service. In that case, report failure and exit.
Reported-by: Yalan Zhang <yalzhang@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
There are some places in passt/pasta which #include <assert.h> and make
various assertions. If we hit these something has already gone wrong, but
they're there so that we a useful message instead of cryptic misbehaviour
if assumptions we thought were correct turn out not to be.
Except.. the glibc implementation of assert() uses syscalls that aren't in
our seccomp filter, so we'll get a SIGSYS before it actually prints the
message. Work around this by adding our own ASSERT() implementation using
our existing err() function to log the message, and an abort(). The
abort() probably also won't work exactly right with seccomp, but once we've
printed the message, dying with a SIGSYS works just as well as dying with
a SIGABRT.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
To send frames on the tap interface, the UDP uses a fairly complicated two
level batching. First multiple frames are gathered into a single "message"
for the qemu stream socket, then multiple messages are send with
sendmmsg(). We now have tap_send_frames() which already deals with sending
a number of frames, including batching and handling partial sends. Use
that to considerably simplify things.
This does make a couple of behavioural changes:
* We used to split messages to keep them under 32kiB (except when a
single frame was longer than that). The comments claim this is
needed to stop qemu from closing the connection, but we don't have any
equivalent logic for TCP. I wasn't able to reproduce the problem with
this series, although it was apparently easy to reproduce earlier.
My suspicion is that there was never an inherent need to keep messages
small, however with larger messages (and default kernel buffer sizes)
the chances of needing more than one resend for partial send()s is
greatly increased. We used not to correctly handle that case of
multiple resends, but now we do.
* Previously when we got a partial send on UDP, we would resend the
remainder of the entire "message", including multiple frames. The
common code now only resends the remainder of a single frame, simply
dropping any frames which weren't even partially sent. This is what
TCP always did and is probably a better idea for UDP too.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Update the UDP code to use the tap layer abstractions for initializing and
updating the L2 and lower headers. This will make adding other tap
backends in future easier.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We have separate IPv4 and IPv6 versions of a macro to construct an
initializer for ethernet headers. However, now that we have htons_constant
it's easy to simply paramterize this with the ethernet protocol number.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Both the TCP and UDP iov_init functions have some large structure literals
defined in "field order" style. These are pretty hard to read since it's
not obvious what value corresponds to what field. Use named field style
initializers instead to make this clearer.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently, when ports are forwarded inbound in pasta mode, we open two
sockets for incoming traffic: one listens on the public IP address and will
forward packets to the tuntap interface. The other listens on localhost
and forwards via "splicing" (resending directly via sockets in the ns).
Now that we've improved the logic about whether we "splice" any individual
packet, we don't need this. Instead we can have a single socket bound to
0.0.0.0 or ::, marked as able to splice and udp_sock_handler() will deal
with each packet as appropriate.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently we have special sockets for receiving datagrams from locahost
which can use the optimized "splice" path rather than going across the tap
interface.
We want to loosen this so that sockets can receive sockets that will be
forwarded by both the spliced and non-spliced paths. To do this, we alter
the meaning of the @splice bit in the reference to mean that packets
receieved on this socket *can* be spliced, not that they *will* be spliced.
They'll only actually be spliced if they come from 127.0.0.1 or ::1.
We can't (for now) remove the splice bit entirely, unlike with TCP. Our
gateway mapping means that if the ns initiates communication to the gw
address, we'll translate that to target 127.0.0.1 on the host side. Reply
packets will therefore have source address 127.0.0.1 when received on the
host, but these need to go via the tap path where that will be translated
back to the gateway address. We need the @splice bit to distinguish that
case from packets going from localhost to a port mapped explicitly with
-u which should be spliced.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
These two functions now have a very similar structure, and their first
part (calling recvmmsg()) is functionally identical. So, merge the two
functions into one.
This does have the side effect of meaning we no longer receive multiple
packets at once for splice (we already didn't for tap). This does hurt
throughput for small spliced packets, but improves it for large spliced
packets and tap packets.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
udp_splice_namebuf is now used only for spliced sending, and so it is
only ever populated with the localhost address, either IPv4 or IPv6.
So, replace the awkward initialization in udp_sock_handler_splice()
with statically initialized versions for IPv4 and IPv6. We then just
need to update the port number in udp_sock_handler_splice().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
UDP_MAX_FRAMES gives the maximum number of datagrams we'll ever handle as a
batch for sizing our buffers and control structures. The subtly different
UDP_TAP_FRAMES gives the maximum number of datagrams we'll actually try to
receive at once for tap packets in the current configuration.
This depends on the mode, meaning that the macro has a non-obvious
dependency on the usual 'c' context variable being available. We only use
it in one place, so it makes more sense to open code this. Add an
explanatory comment while we're there.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The receive part of udp_sock_handler() and udp_sock_handler_splice() is now
almost identical. In preparation for merging that, split the receive part
of udp_sock_handler() from the part preparing and sending the frames for
sending on the tap interface. The latter goes into a new udp_tap_send()
function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The last part of udp_sock_handler() does the actual sending of frames
to the tap interface. For pasta that's just a call to
udp_tap_send_pasta() but for passt, it's moderately complex and open
coded.
For symmetry, move the passt send path into its own function,
udp_tap_send_passt(). This will make it easier to abstract the tap
interface in future (e.g. when we want to add vhost-user).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
udp_sock_handler() has a surprising difference in flow between pasta and
passt mode: For pasta we send each frame to the tap interface as we prepare
it. For passt, though, we prepare all the frames, then send them with a
single sendmmsg().
Alter the pasta path to also prepare all the frames, then send them at the
end. We already have a suitable data structure for the passt case. This
will make it easier to abstract out the tap backend difference in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The main purpose of udp_sock_fill_data_v[46]() is to construct the IP, UDP
and other headers we'll need to forward data onto the tap interface. In
addition they update the control structures (iovec and mmsghdr) we'll need
to send the messages, and in the case of pasta actually sends it.
This leads the control structure management and the send itself awkwardly
split between udp_sock_fill_data_v[46]() and their caller
udp_sock_handler(). In addition, this tail part of udp_sock_fill_datav[46]
is essentially common between the IPv4 and IPv6 versions, apart from which
control array we're working on.
Clean this up by reducing these functions to just construct the headers
and renaming them to udp_update_hdr[46]() accordingly. The control
structure updates are now all in the caller, and common for IPv4 and IPv6.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently, we always populate udp[46]_l2_iov_tap[].iov_base with the
very start of the header buffers, including space for the qemu vnet_len
tag suitable for passt mode. That's ok because we don't actually use these
iovecs for pasta mode.
However, we do know the mode in udp_sock[46]_iov_init() so adjust these
to the beginning of the headers we'll actually need for the mode: including
the vnet_len tag for passt, but excluding it for pasta.
This allows a slightly nicer way to locate the right buffer to send in the
pasta case, and will allow some additional cleanups later.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Apart from which mh array they're operating on the recvmmsg() calls in
udp_sock_handler() are identical between the IPv4 and IPv6 paths, as are
some of the control structure updates.
By using some local variables to refer to the IP version specific control
arrays, make some more logic common between the IPv4 and IPv6 paths. As
well as slightly reducing the code size, this makes it less likely that
we'll accidentally use the IPv4 arrays in the IPv6 path or vice versa as we
did in a recently fixed bug.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
udp_sock_handler() incorrectly uses udp6_l2_mh_tap[] on the IPv4 path. In
fact this is harmless because this assignment is redundant (the 0th entry
msg_hdr will always point to the 0th iov entry for both IPv4 and IPv6 and
won't change).
There is also an incorrect usage of udp6_l2_mh_tap[] in
udp_sock_fill_data_v4. This one can cause real problems, because we'll
use stale iov_len values if we send multiple messages to the qemu socket.
Most of the time that will be relatively harmless - we're likely to either
drop UDP packets, or send duplicates. However, if the stale iov_len we
use ends up referencing an uninitialized buffer we could desynchronize the
qemu stream socket.
Correct both these bugs. The UDP6 path appears to be correct, but it does
have some comments that incorrectly reference the IPv4 versions, so fix
those as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
udp_sock_handler_splice() reads a whole batch of datagrams at once with
recvmmsg(). It then forwards them all via a single socket on the other
side, based on the source port.
However, it's entirely possible that the datagrams in the set have
different source ports, and thus ought to be forwarded via different
sockets on the destination side. In fact this situation arises with the
iperf -P4 throughput tests in our own test suite. AFAICT we only get away
with this because iperf3 is strictly one way and doesn't send reply packets
which would be misdirected because of the incorrect source ports.
Alter udp_sock_handler_splice() to split the packets it receives into
batches with the same source address and send each batch with a separate
sendmmsg().
For now we only look for already contiguous batches, which means that if
there are multiple active flows interleaved this is likely to degenerate
to batches of size 1. For now this is the simplest way to correct the
behaviour and we can try to optimize later.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Move the part of udp_sock_handler_splice() concerned with sending out the
datagrams into a new udp_splice_sendfrom() helper. This will make later
cleanups easier.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We maintain a set of buffers for UDP packets to be forwarded via the tap
interface in udp[46]_l2_buf. We then have a separate set of buffers for
packets to be "spliced" in udp_splice_buf[]. However, we only use one of
these at a time, so we can share the buffer space.
For the receiving splice packets we can not only re-use the data buffers
but also the udp[46]_l2_iov_sock and udp[46]_l2_mh_sock control structures.
For sending the splice packets we keep the same data buffers, but we need
specific control structures. We create udp[46]_iov_splice - we can't
reuse udp_l2_iov_sock[] because we need to write iov_len as we're writing
spliced packets, but the tap path expects iov_len to remain the same (it
only uses it for receive). Likewise we create udp[46]_mh_splice with the
mmsghdr structures for sending spliced packets. As well as needing to
reference different iovs, these need to all reference udp_splice_namebuf
instead of individual msg_name fields for each slot.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
udp_sock_handler_splice() has a somewhat clunky if to extract the port from
a socket address which could be either IPv4 or IPv6. Future changes are
going to make this even more clunky, so introduce a helper function to
do this extraction.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
These two constants have the same value, and there's not a lot of reason
they'd ever need to be different. Future changes will further integrate
the spliced and "tap" paths so that these need to be the same. So, merge
them into UDP_MAX_FRAMES.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Previous cleanups mean that we can now rework some complex ifs in
udp_sock_handler_splice() into a simpler set.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
A UDP pseudo-connection between port A in the init namespace and port B in
the pasta guest namespace involves two sockets: udp_splice_init[v6][B]
and udp_splice_ns[v6][A]. The socket which originated this "connection"
will be permanent but the other one will be closed on a timeout.
When we get a packet from the originating socket, we update the timeout on
the other socket, but we don't do the same when we get a reply packet from
the other socket. However any activity on the "connection" probably
indicates that it's still in use. Without this we could incorrectly time
out a "connection" if it's using a protocol which involves a single
initiating packet, but which then gets continuing replies from the target.
Correct this by updating the timeout on both sockets for a packet in either
direction. This also updates the timestamps for the permanent originating
sockets which is unnecessary, but harmless.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
When we look up udp_splice_to_ns[][].orig_sock in udp_sock_handler_splice()
we're finding the socket on which the originating packet for the
"connection" was received on. However, we don't specifically need this
socket to be the originating one - we just need one that's bound to the
the source port of this reply packet in the init namespace. We can look
this up in udp_splice_to_init[v6][src].target_sock, whose defining
characteristic is exactly that. The same applies with init and ns swapped.
In practice, of course, the port we locate this way will always be the
originating port, since we couldn't have started this "connection" if it
wasn't.
Change this, and we no longer need the @orig_sock field at all. That
leaves just @target_sock which we rename to simply @sock. The whole
udp_splice_flow structure now more represents a single bound port than
a "flow" per se, so rename and recomment it accordingly. Likewise the
udp_splice_to_{ns,init} names are now misleading, since the ports in
those maps are used in both directions. Rename them to
udp_splice_{ns,init} indicating the location where the described
socket is bound.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
When we look up udp_splice_to_ns[v6][src].target_sock in
udp_sock_handler_splice, all we really require of the socket is that it
be bound to port src in the pasta guest namespace. Similarly for
udp_splice_to_init but bound in the init namespace.
Usually these sockets are created temporarily by udp_splice_connect() and
cleaned up by udp_timer(). However, depending on the -u and -U options its
possible we have a permanent socket bound to the relevant port created by
udp_sock_init(). If such a socket exists, we could use it instead of
creating a temporary one. In fact we *must* use it, because we'll fail
trying to bind() a temporary one to the same port.
So allow this, store permanently bound sockets into udp_splice_to_{ns,init}
in udp_sock_init(). These won't get incorrectly removed by the timer
because we don't put a corresponding entry in the udp_act[] structure
which directs the timer what to clean up.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
For each IP version udp_socket() has 3 possible calls to sock_l4(). One
is for the "non-spliced" bound socket in the init namespace, one for the
"spliced" bound socket in the init namespace and one for the "spliced"
bound socket in the pasta namespace.
However when this is called to create a socket in the pasta namspeace there
is a logic error which causes it to take the path for the init side spliced
socket as well as the ns socket. This essentially tries to create two
identical sockets on the ns side. Unsurprisingly the second bind() call
fails according to strace.
Correct this to only attempt to open one socket within the ns.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The @splice field in union udp_epoll_ref can have a number of values for
different types of "spliced" packet flows. Split it into several single
bit fields with more or less independent meanings. The new @splice field
is just a boolean indicating whether the socket is associated with a
spliced flow, making it identical to the @splice fiend in tcp_epoll_ref.
The new bit @orig, indicates whether this is a socket which can originate
new udp packet flows (created with -u or -U) or a socket created on the
fly to handle reply socket. @ns indicates whether the socket lives in the
init namespace or the pasta namespace.
Making these bits more orthogonal to each other will simplify some future
cleanups.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We set this field, but nothing ever checked it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently we connect() the socket we use to forward spliced UDP flows.
However, we now only ever use sendto() rather than send() on this socket
so there's not actually any need to connect it. Don't do so.
Rename a number of things that referred to "connect" or "conn" since that
would now be misleading.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
udp_sock_handler_splice() has two different ways of sending out packets
once it has determined the correct destination socket. For the originating
sockets (which are not connected) it uses sendto() to specify a specific
address. For the forward socket (which is connected) we use send().
However we know the correct destination address even for the forward socket
we do also know the correct destination address. We can use this to use
sendto() instead of send(), removing the need for two different paths and
some staging data structures.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Each entry udp_splice_map[v6][N] keeps information about two essentially
unrelated packet flows. @ns_conn_sock, @ns_conn_ts and @init_bound_sock
track a packet flow from port N in the host init namespace to some other
port in the pasta namespace (the one @ns_conn_sock is connected to).
@init_conn_sock, @init_conn_ts and @ns_bound_sock track packet flow from
port N in the pasta namespace to some other port in the host init namespace
(the one @init_conn_sock is connected to).
Split udp_splice_map[][] into two separate tables for the two directions.
Each entry in each table is a 'struct udp_splice_flow' with @orig_sock
(previously the bound socket), @target_sock (previously the connected
socket) and @ts (the timeout for the target socket).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
pasta handles "spliced" port forwarding by resending datagrams received on
a bound socket in the init namespace to a connected socket in the guest
namespace. This means there are actually three ports associated with each
"connection". First there's the source and destination ports of the
originating datagram. That's also the destination port of the forwarded
datagram, but the source port of the forwarded datagram is the kernel
allocated bound address of the connected socket.
However, by bind()ing as well as connect()ing the forwarding socket we can
choose the source port of the forwarded datagrams. By choosing it to match
the original source port we remove that surprising third port number and
no longer need to store port numbers in struct udp_splice_port.
As a bonus this means that the recipient of the packets will see the
original source port if they call getpeername(). This rarely matters, but
it can't hurt.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Given that we use just the first valid DNS resolver address
configured, or read from resolv.conf(5) on the host, to forward DNS
queries to, in case --dns-forward is used, we don't need to duplicate
dns[] to dns_send[]:
- rename dns_send[] back to dns[]: those are the resolvers we
advertise to the guest/container
- for forwarding purposes, instead of dns[], use a single field (for
each protocol version): dns_host
- and rename dns_fwd to dns_match, so that it's clear this is the
address we are matching DNS queries against, to decide if they need
to be forwarded
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
If we disable a given IP version automatically (no corresponding
default route on host) or administratively (--ipv4-only or
--ipv6-only options), we don't initialise related buffers and
services (DHCP for IPv4, NDP and DHCPv6 for IPv6). The "tap"
handlers will also ignore packets with a disabled IP version.
However, in commit 3c6ae62510 ("conf, tcp, udp: Allow address
specification for forwarded ports") I happily changed socket
initialisation functions to take AF_UNSPEC meaning "any enabled
IP version", but I forgot to add checks back for the "enabled"
part.
Reported by Paul: on a host without default IPv6 route, but IPv6
enabled, connect, using IPv6, to a port handled by pasta, which
tries to send data to a tap device without initialised buffers
for that IP version and exits because the resulting write() fails.
Simpler way to reproduce: pasta -6 and inbound IPv4 connection, or
pasta -4 and inbound IPv6 connection.
Reported-by: Paul Holzinger <pholzing@redhat.com>
Fixes: 3c6ae62510 ("conf, tcp, udp: Allow address specification for forwarded ports")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Now that we allow loopback DNS addresses to be used as targets for
forwarding, we need to check if DNS answers come from those targets,
before deciding to eventually remap traffic for local redirects.
Otherwise, the source address won't match the one configured as
forwarder, which means that the guest or the container will refuse
those responses.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We recently corrected some errors handling the endianness of IPv4
addresses. These are very easy errors to make since although we mostly
store them in network endianness, we sometimes need to manipulate them in
host endianness.
To reduce the chances of making such mistakes again, change to always using
a (struct in_addr) instead of a bare in_addr_t or uint32_t to store network
endian addresses. This makes it harder to accidentally do arithmetic or
comparisons on such addresses as if they were host endian.
We introduce a number of IN4_IS_ADDR_*() helpers to make it easier to
directly work with struct in_addr values. This has the additional benefit
of making the IPv4 and IPv6 paths more visually similar.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This macro checks if an IPv4 address is in the loopback network
(127.0.0.0/8). There are two places where we open code an identical check,
use the macro instead.
There are also a number of places we specifically exclude the loopback
address (127.0.0.1), but we should actually be excluding anything in the
loopback network. Change those sites to use the macro as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
First off, as we swap endianness for source ports in
udp_fill_data_v{4,6}(), we want host endianness, not network
endianness. It doesn't actually matter if we use htons() or ntohs()
here, but the current version is confusing.
In the IPv4 path, when we remap DNS answers, we already swapped the
endianness as needed for the source port: don't swap it again,
otherwise we'll not map DNS answers for IPv4.
In the IPv6 path, when we remap DNS answers, we want to check that
they came from our upstream DNS server, not the one configured via
--dns-forward (which doesn't even need to exist for this
functionality to work).
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Since kernel version 5.7, commit c427bfec18f2 ("net: core: enable
SO_BINDTODEVICE for non-root users"), we can bind sockets to
interfaces, if they haven't been bound yet (as in bind()).
Introduce an optional interface specification for forwarded ports,
prefixed by %, that can be passed together with an address.
Reported use case: running local services that use ports we want
to have externally forwarded:
https://github.com/containers/podman/issues/14425
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Logging to file is going to add some further complexity that we don't
want to squeeze into util.c.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Commit c318ffcb4c ("udp: Ignore bogus -Wstringop-overread for
write() from gcc 12.1") uses a gcc pragma to ignore a bogus warning,
which started appearing on gcc 12.1 (aarch64 and x86_64) due to:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103483
...but gcc 12.2 has the same issue. Not just that: if LTO is enabled,
the pragma itself is ignored (this wasn't the case with gcc 12.1),
because of:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80922
Drop the pragma, and assign a frame (in the networking sense) pointer
from the offset of the Ethernet header in the buffer, then pass it to
write() and pcap(), so that gcc doesn't obsess anymore with the fact
that an Ethernet header is 14 bytes and we're sending more than that.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Port numbers (for both TCP and UDP) are 16-bit, and so fit exactly into a
'short'. USHRT_MAX is therefore the maximum port number and this is widely
used in the code. Unfortunately, a lot of those places don't actually
want the maximum port number (USHRT_MAX == 65535), they want the total
number of ports (65536). This leads to a number of potentially nasty
consequences:
* We have buffer overruns on the port_fwd::delta array if we try to use
port 65535
* We have similar potential overruns for the tcp_sock_* arrays
* Interestingly udp_act had the correct size, but we can calculate it in
a more direct manner
* We have a logical overrun of the ports bitmap as well, although it will
just use an unused bit in the last byte so isnt harmful
* Many loops don't consider port 65535 (which does mitigate some but not
all of the buffer overruns above)
* In udp_invert_portmap() we incorrectly compute the reverse port
translation for return packets
Correct all these by using a new NUM_PORTS defined explicitly for this
purpose.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
