A couple of days ago, we started running out of space there as we're
about to install gcc -- about 50 MiB are missing.
Given that virt-resize (which could be conveniently invoked by the
Makefile for tests) reorders partitions if we expand the first one,
resize the image using qemu-img from the test script itself, and then
take care of expanding root partition and filesystem online later.
This is probably a temporary hack, so I'm not looking for a more
generic or elegant solution at the moment.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
For some reason using https to clone from the passt git repo is very slow,
at least from network-distant places. Use git protocol in the demo instead
to avoid a tedious wait to get the source.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With pasta, the namespace interface name is generally the same as the host
interface name. We already rely on this in the dhcp/pasta tests, but for
no clear reason ndp/pasta separately determines the host interface name.
Remove this unnecessary step.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The iperf based test commands create a bunch of .bw and .pid files for
each iperf client and server. The server side .bw files are cleaned
up afterwards, but the pid files are not, and none of the client side
files are cleaned up. The latter doesn't really matter when the
client is run on ephemeral guests, but sometimes we run it in a
namespace that shares the filesystem with the host.
Clean up all of these files after the tests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Before starting the guests, these tests configure addresses in a pasta
namespace using dhclient. However, because it's a user namespace, it's
not running as "real" root and can't write to the dhclient pid file.
This doesn't stop it working, but causes an ugly error message which we
can avoid by using the --no-pid option.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
All the UDP tests use :> to truncate some temporary data files. This
appears to be so that they're empty before writing data to them with tee.
However tee, by default, truncates its output file anyway (you need tee -a
to append). So drop the unnecessary truncations.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
teardown_passt_in_ns() sends a ^D to the NS pane, which appears to be
intended to terminate the nsenter running there, leaving the namespace.
However, we've also sent a ^D to the PASST pane which will exit the pasta
instance which created the namespace. With the namespace destroyed the
nsenter in the NS pane will be killed, so it does not need to be exited
explicitly.
In fact sending the extra ^D can be harmful, since it will exit the shell
in which the nsenter was run, causing the whole pane to be closed. That
can then mean that the "pane_wait NS" hangs indefinitely. I believe this
will sometimes work, because there's a race between the various options
here, but it should be more reliable without the extra ^D.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 41c02e10 ("tests: Use nmap-ncat instead of openbsd netcat for pasta
tests") updated the pasta tests to use the nmap version of ncat instead of
the openbsd version, for greater portability.
For some upcoming changes, however, we'll be wanting to use socat.
"socat" can do everything "ncat" can and more, so let's move all the
tests using host tools (either directly on the host or via mbuto
generated images) to using socat instead.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Fix a typo in port specification, 31337 instead of x31337]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In what looks like a copy-and-paste error from the TCP script, the
udp/passt test script creates a test file called '__TEMP_BIG__', while
the commands it use the variable __TEMP__. Correct this so that a) we
actually transfer the data we created for the purpose and b) we don't
leave a stale __TEMP_BIG__ file in the current directory.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The dhcp/passt and dhcp/passt_in_ns tests at least, and maybe others
use 'hout' commands that need to be able to detect empty output.
However, we don't set PS1, which means the screen-scraping logic which
detects this may not be reliable. In addition, if the host is using a
recent bash, it will have bracketed paste mode enabled which will also
add escape codes which will mess up the empty output detection.
Set the prompt and disable bracketed paste mode from the passt and
passt_in_ns setups to avoid these problems.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently our small custom dhclient-script only handles the 'domain-name'
option, which can just list a single domain, not the 'domain-search'
option, which can handle several. Correct it to handle both.
We also weren't emptying the resolv.conf file before we began, which
could lead to surprising contents after multiple DHCP transactions.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We previously introduced a change to passt to handle the case where the
host machine is its own nameserver - so resolv.conf points to 127.0.0.1.
In this case we advertize the gateway as the DNS server for the guest,
which in turn will be redirected back to the host by existing passt logic.
The dhcp/passt doesn't handle this case correctly, so add some logic to
account for it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To check publishing of DNS information via DHCP, we need to extract a list
of nameservers and/or search domains from resolv.conf in the test script.
The current version (usually) leaves the result with a trailing ','.
That's usually ok because it happens on both guest and host sides. However
it's kind of confusing, and might stop working if the host had a
resolv.conf without a trailing \n on the last line. It also makes some
later changes we'll need more difficult.
So, normalize the output from resolv.conf a bit further, removing any
trailing ','. It turns out we can do this with a slightly less complex
sed expression than the one we already have.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Although it can operate without them, dhclient can issue errors if it
doesn't have /var/run to write a pid file and /var/lib to write a leases
file. Create those in mbuto.img to stop it complaining.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We now supply a minimal dhclient-script of our own in the mbuto boot image.
There are some problems with it, so add some basic logging to help debug
it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Modern Fedora (and RHEL) systems have /sbin as a symlink to /usr/sbin
(along with a number of similar links). Along with that it expects to
find dhclient-script in /usr/sbin/dhclient-script rather than
/sbin/dhclient-script.
Link them together in our mbuto image so that the Fedora build of dhclient
can find it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
AFAICT the symlink we created in mbuto from /usr/bin/bash to /bin/sh was
for the benefit of a dhclient-script which used /usr/bin/bash as its
interpreter (e.g. in Fedora). That was a bit risky if the script really
did require bash and we linked it to dash or another shell.
We now supply our own custom dhclient-script, so we don't need the
link any more.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Similar case as the one fixed by David's patch "tests: Remove
unnecessary ^D in passt_in_ns teardown": we happen to pseudo-randomly
close panes by unnecessarily exiting the parent shells there, and
subsequent pane_wait directives hang.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
For some reason, I now have to update some "vendored" dependencies
on a fresh git clone, at least in my environment, before building.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This was dependent on my own environment where I usually have /sbin
in $PATH. If that's missing, given that we're running dhclient as
user, we won't find it.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Parsing pstree's output is somewhat unreliable: there might be
multiple pasta instances running on the same host, and depending on
the overall output width pstree might truncate some branches.
Ask pasta to save its PID to file, and use that as parameter for
pgrep to find the PID of the interactive shell whose user and network
namespaces we want to join.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The Fedora test file extracts some information from the host resolv.conf
into a DNS6 variable which is then never used. Remove this unnecessary
step, which is presumably a leftover from an earlier iteration.
This was the only user of 'head' and 'sed' in the test file, so those can
also be removed from the required tools. The debian and ubuntu test files
also listed 'head' and 'sed' as tools, although they don't use them,
I'm guessing because of an earlier version which had the same DNS6 code.
Remove those as well.
The opensuse test file still actually uses DNS6, so leave it there for now.
The DNS handling and network config handling for SuSE looks to be kind of
broken, but fixing that is a job for another day.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Before booting the guest images, the distro test cases need to modify the
guest images, using virt-edit and guestfish, to boot in the way we need.
At present this gets repeated on every test run, even though it's not
really doing anything we want to test for.
In addition many of the images have the same preparation steps leading to
a lot of duplicated stages in the tests. A number of additional images can
be prepared using common steps, even if the ones used now have small
differences.
Therefore move the preparation of most of the guest images to the asset
build phase, where they can be done a single time for multiple test runs,
using a common preparation script. We can even avoid making a copy of the
disk image for booting, by using qemu's -snapshot option.
A few of the distros (openSUSE and older Ubuntu) do need different steps.
For now we don't chage how they are run, they could possibly be handled
more like this in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Rather than directly download distro images from the test scripts, handle
all the downloads during the test asset build, then just clone them for
the tests themselves. This avoids repeated downloads which can be very
slow when debugging failing tests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Add OPENSUSE_IMGS to DOWNLOAD_ASSETS in Makefile, and note
that xzcat doesn't take a -O option in test/distro/opensuse]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently test/run uses wildcards to run all of the tests in a directory.
However, that wildcard list is filtered down by the "onlyfor" directives
in the test files... usually to a single file.
Therefore, just explicitly list the files we *really* want to run for this
test mode. This makes it easier to see at the top level what tests will
be executed, and to change that list temporarily while debugging specific
failures.
This means the "onlyfor" directive no longer has any purpose, and we can
remove it. "onlyfor" was also the only used of the $MODE variable, so we
can remove that too.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The top level listing control of which tests to run is in test/run, however
it uses the test() function which runs an entire directory of test files,
filtered by some criteria. This makes it awkward to narrow down to a
subset of tests when debugging a specific failure.
To make this easier, have test() take an explicit list of test files to
run, and have the caller in test/run handle the directory traversal. The
construct we use for this is pretty awkward to handle the fact that we're
in the source tree root directory rather than test/ at this point in
test/run. Later cleanups will improve that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The test scripts support a "req" directive which requires one test script
to be run before another. It's implemented by doing a topological sort
based on these directives in the runner scripts, which is about as awkward
as you'd expect in Bourne shell.
It turns out we only use this functionality in one place - to make the
"make install" test run after the plain "make" test. We also already have
a simpler way of making sure tests run in a specific order: just put them
into the same test script file.
So, remove support for the "req" directive and just fold the build/all and
build/install test scripts together.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Apparently qemu's ARM virt machine needs to be explicitly given a firmware
image, rather than just supplying a sane default. Unfortunately the EDK2
firmware image we need isn't in the same place on all host distros.
Currently the test scripts hardcode the Debian location, meaning it will
break on hosts that have it somewhere else. This patch searches multiple
locations for the firmware, and creates a local link during the asset build
phase, which the tests can then use.
For now it only searches the locations used by Debian and Fedora, but
that's a small improvement in robustness already, and can be later improved
further if we need to.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Move the download of mbuto and using it to create a sample initramfs to
the asset build makefile, rather than embedding it in the test scripts
themselves.
The two_guests tests used to use two separate copies of the mbuto
image. As an initramfs the mbuto image is strictly readonly though,
so that's not necessary. So, also use the same image for both guests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A number of passt/pasta testcases have initial steps which are just about
building images or other assets we need for the test proper. Repeating
these for each test run can be quite costly.
This patch makes a start on moving this sort of test asset building to
a separate phase before running the tests proper. For now just add a
Makefile to handle the asset building (although it doesn't build
anything yet), and make the path where we'll be building the assets
available to the tests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A lot of tests and examples invoke qemu with the command "kvm". However,
as far as I can tell, "kvm" being aliased to the appropriate qemu system
binary is Debian specific. The binary names from qemu upstream -
qemu-system-$ARCH - also aren't universal, but they are more common (they
should be good for both Debian and Fedora at least).
In order to still get KVM acceleration when available, we use the option
"-M accel=kvm:tcg" to tell qemu to try using either KVM or TCG in that
order
A number of the places we invoked "kvm" are expecting specifically an x86
guest, and so it's also safer to explicitly invoke qemu-system-x86_64.
Some others appear to be independent of the target arch (just wanting the
same arch as the host to allow KVM acceleration). Although I suspect there
may be more subtle x86 specific options in the qemu command lines, attempt
to preserve arch independence by using $(uname -m).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Several tests run pp64le guests using "qemu-system-ppc64le". But, at the
system level there's no difference between ppc64 and ppc64le - it's the
same hardware, just placed into different endian modes by OS early boot
code. Reflecting that, qemu only supplies a single "qemu-system-ppc64".
Some distros alias qemu-system-ppc64le to qemu-system-ppc64 (Debian does),
but it's best not to count on this (Fedora doesn't, for example).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David reports that dhclient-script(8) on Fedora needs a number of
binaries that are not included in PROGS of the current mbuto profile,
and we would also need to include hostnamectl(1) there, which will
fail without a systemd init.
Embed a minimal script for dhclient(8) in the profile itself, written
to /sbin/dhclient-script at boot, to just check what we need to check
out of DHCP and DHCPv6 functionality.
While at it, drop busybox and logger from PROGS, as we don't need them,
and add hostname(1). While DHCP option 12 isn't supported yet by the
DHCP implementation in passt, we should probably add it soon.
Note: owing to the simplicity of this script, we now need to bring up
the interface before starting dhclient: add this in test scripts where
it's not the case yet.
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
note that we need to bring up the interface before starting dhclient
This depends on a future change in mbuto to accept external profile
files. Add a file defining what we need for tests and demos, dropping
udhcpc and script as they're not needed anymore, and switch to it.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There are several places which explicitly list the various generated
binaries, even though a $(BIN) variable already lists them. There are
several more places that list all the manpage files, introduce a
$(MANPAGES) variable to remove that repetition as well.
Tweak the generation of pasta.1 as a link to passt.1 so it's not just made
as a side effect of the pasta target.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: add passt.1 and qrap.1 to guest files for distro tests]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
A number of the testcases use options specific the OpenBSD version of
netcat. That's available in Debian, but not easily available in Fedora.
Switch the pasta tests to using the nmap version of netcat (a.k.a. ncat).
This is easily available in both Debian and Fedora, and appears to be a
bit more modern and maintained as well.
ncat generally requires explicit listen addresses (which is good for
clarity anywhere). Its default options appear to remove the need for the
-N and -q options.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: changed one ncat listening address to IPv6 loopback]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
For some reason, the passt/pasta tests and examples use dhclient for
DHCPv6, but in most cases use udhcpc for DHCPv4. Change it to use dhclient
for both DHCPv4 and DHCPv6. This means one less tool we need for testing,
plus dhclient is easily available on Fedora whereas udhcpc is not.
Note that the passt tests still rely on udhcpc indirectly because mbuto
wants to put it into the guest images it generates.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A number of tests and examples use dhclient in both IPv4 and IPv6 modes.
We use "dhclient -6" for IPv6, but usually just "dhclient" for IPv4. Add
an explicit "-4" argument to make it more clear and explicit.
In addition, when dhclient is run from within pasta it usually won't be
"real" root, and so will not have access to write the default global pid
file. This results in a mostly harmless but irritating error:
Can't create /var/run/dhclient.pid: Permission denied
We can avoid that by using the --no-pid flag to dhclient.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ip(8)'s ability to take abbreviated arguments (e.g. "li sh" instead of
"link show") is very handy when using it interactively, but it doesn't make
for very readable scripts and examples when shown that way.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
distro/fedora contains two versions of the basic tests, used for different
Fedora versions. One uses explicit listening address for netcat in some
extra places, the other does not. Apparently the older netcat versions
didn't require the explicit addresses. Not supplying addresses doesn't
test anything useful though, just a detail in netcat's behaviour. So,
it's cleaner to just always supply explicit addresses.
In addition, we're explicitly expecting the nmap version of ncat, also
known as "ncat". So, it's more explicit what we're after if we invoke it
via that name rather than "nc", which will go via an /etc/alternatives
link.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Fix port argument in distro_quick_pasta_test{,_fedora34} too]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Having all those 'echo $?' is rather distracting in demos.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Sefano Brivio <sbrivio@redhat.com>
...there are no 'test' directives in demo, and this causes a
script failure.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
'sleep' always needs an argument, this was meant to introduce
a 2 seconds delay.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There's no need to return non-zero if there have been failures in
run(), because the exit value is already determined from the number
of failures reported in the log file.
Return zero, so that this doesn't cause the script to fail, given we
now run it with -e.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There are a few occurrences of this assignment, which are needed to
re-add ::1 as loopback address after the MTU has been increased
back from a value below 1280 bytes.
This one, however, is redundant, and causes an error in the
execution.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
A number of individual test cases use '*out' commands to check for success
of specific commands they've issued. Now that the test harness is testing
for success of all issued commands as a matter of course, we no longer need
to do this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
