...and while at it, fix an issue in the calculation of the last IOV
buffer size: if we can't receive enough data to fill up the window,
the last buffer can be filled completely.
Also streamline the code setting iovec lengths if cached values are
not matching.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We won't necessarily have another choice to ACK in a timely fashion
if we skip ACKs from a number of states (including ESTABLISHED) when
there's enough window left. Check for ACKed bytes as soon as it makes
sense.
If the sending window is not reported by the kernel, ACK as soon as
we queue onto the socket, given that we're forced to use a rather
small window.
In FIN_WAIT_1_SOCK_FIN, we also have to account for the FIN flag sent
by the peer in the sequence.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Sending 64 frames in a batch looks quite bad when a duplicate ACK
comes right at the beginning of it. Lowering this to 32 doesn't
affect performance noticeably, with 16 the impact is more apparent.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Similar to UDP, but using a simple sendmsg() on iovec-style buffers
from tap instead, as we don't need to preserve message boundaries.
A quick test in PASTA mode, from namespace to init via tap:
# ip link set dev pasta0 mtu 16384
# iperf3 -c 192.168.1.222 -t 60
[...]
[ ID] Interval Transfer Bitrate
[ 5] 0.00-60.00 sec 80.4 GBytes 11.5 Gbits/sec receiver
# iperf3 -c 2a02:6d40:3cfc:3a01:2b20:4a6a:c25a:3056 -t 60
[...]
[ ID] Interval Transfer Bitrate
[ 5] 0.00-60.01 sec 39.9 GBytes 5.71 Gbits/sec receiver
# ip link set dev pasta0 mtu 65520
# iperf3 -c 192.168.1.222 -t 60
[...]
[ ID] Interval Transfer Bitrate
[ 5] 0.00-60.01 sec 88.7 GBytes 12.7 Gbits/sec receiver
# iperf3 -c 2a02:6d40:3cfc:3a01:2b20:4a6a:c25a:3056 -t 60
[...]
[ ID] Interval Transfer Bitrate
[ 5] 0.00-60.00 sec 79.5 GBytes 11.4 Gbits/sec receiver
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There's no need to constantly query the socket for number of
acknowledged bytes if we're far from exhausting the sending window,
just do it if we're at least down to 90% of it.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
...boom. To make it slightly more reasonable, shrink struct tap_msg
down a bit, and move the main message array away from the stack of
tap_handler_passt().
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If we can't bind() ping sockets, the echo identifier sent out from
the socket won't be the original one seen from the tap. Binding a
ping socket doesn't require any security capability, but it might
still fail due to a broken SELinux policy, see for example:
https://bugzilla.redhat.com/show_bug.cgi?id=1848929
Track the ICMP echo identifier as part of the epoll reference for
the socket and replace it in the reply on mismatch. We won't send
out the original identifier as sent from the guest, but still better
than missing replies.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If a tap protocol handler doesn't consume the full batch of packets
in one go, we already overrode the destination address in the packet
buffer with the address which is configured at start. If we re-enter
the tap handler, we shouldn't use the address from the packet buffers
anymore to set the observed address of the guest: that's not the
address observed from the guest, it's the configured one now.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Traffic with loopback source address will be forwarded to the direct
loopback connection in the namespace, and the tap interface is used
for the rest.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This isn't optional: TCP streams must carry a unique, hard-to-guess,
non-zero label for each direction. Linux, probably among others,
will otherwise refuse to associate packets in a given stream to the
same connection.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Provide an AVX2-based function using compiler intrinsics for
TCP/IP-style checksums. The load/unpack/add idea and implementation
is largely based on code from BESS (the Berkeley Extensible Software
Switch) licensed as 3-Clause BSD, with a number of modifications to
further decrease pipeline stalls and to minimise cache pollution.
This speeds up considerably data paths from sockets to tap
interfaces, decreasing overhead for checksum computation, with
16-64KiB packet buffers, from approximately 11% to 7%. The rest is
just syscalls at this point.
While at it, provide convenience targets in the Makefile for avx2,
avx2_debug, and debug targets -- these simply add target-specific
CFLAGS to the build.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
dhcpv6_opt() already reflects consumed bytes on the remaining length,
and that we're not exceeding the message length. At this point, the
remaining length is usually zero.
While at it, drop a useless __packed__ attribute that triggers a gcc
warning.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Allow to bind IPv4 and IPv6 ports to tap, namespace or init separately.
Port numbers of TCP ports that are bound in a namespace are also bound
for UDP for convenience (e.g. iperf3), and IPv4 ports are always bound
if the corresponding IPv6 port is bound (socket might not have the
IPV6_V6ONLY option set). This will also be configurable later.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
...not just for loopback addresses, with the address of the default
gateway. Otherwise, the guest might receive packets with source and
destination set to the same address.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This is actually reasonable in terms of memory consumption and
allows for better performance with local services.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Packets are received directly onto pre-cooked, static buffers
for IPv4 (with partial checksum pre-calculation) and IPv6 frames,
with pre-filled Ethernet addresses and, partially, IP headers,
and sent out from the same buffers with sendmmsg(), for both
passt and pasta (non-local traffic only) modes.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The guest might not send other types of traffic before we try to
communicate to it, so take also this chance to store its configured
addresses.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This value should work for all tap-like interfaces and is rather
convenient for performance testing. It will be configurable later
on.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host
connectivity to an otherwise disconnected, unprivileged network
and user namespace, similarly to slirp4netns. Given that the
implementation is largely overlapping with PASST, no separate binary
is built: 'pasta' (and 'passt4netns' for clarity) both link to
'passt', and the mode of operation is selected depending on how the
binary is invoked. Usage example:
$ unshare -rUn
# echo $$
1871759
$ ./pasta 1871759 # From another terminal
# udhcpc -i pasta0 2>/dev/null
# ping -c1 pasta.pizza
PING pasta.pizza (64.190.62.111) 56(84) bytes of data.
64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms
--- pasta.pizza ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms
# ping -c1 spaghetti.pizza
PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes
64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms
--- spaghetti.pizza ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms
This entails a major rework, especially with regard to the storage of
tracked connections and to the semantics of epoll(7) references.
Indexing TCP and UDP bindings merely by socket proved to be
inflexible and unsuitable to handle different connection flows: pasta
also provides Layer-2 to Layer-2 socket mapping between init and a
separate namespace for local connections, using a pair of splice()
system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local
bindings. For instance, building on the previous example:
# ip link set dev lo up
# iperf3 -s
$ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4
[SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender
[SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver
iperf Done.
epoll(7) references now include a generic part in order to
demultiplex data to the relevant protocol handler, using 24
bits for the socket number, and an opaque portion reserved for
usage by the single protocol handlers, in order to track sockets
back to corresponding connections and bindings.
A number of fixes pertaining to TCP state machine and congestion
window handling are also included here.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
On pc-q35, pci.2 is usually configured by libvirt as a hotplug bus,
so we can't use address 0x0 there. Look for free busses starting from
pci.3 instead.
While at it, add proper error reporting for passt probing, and add
some comments to structs that were previously missing.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Before commit 8f7baad7f035 ("tcp: Add snd_wnd to TCP_INFO"), the
kernel didn't export tcpi_snd_wnd via TCP_INFO, which means we don't
know what's the window size of the receiver, socket-side.
To get TCP connections working in that case, ignore this value if
it's zero during handshake, and use the initial window value as
suggested by RFC 6928 (14 600 bytes, instead of 4 380 bytes), to
keep network performance usable.
To make the TCP dynamic responsive enough in this case, also check
the socket for available data whenever we get an ACK segment from
tap, instead of waiting until all the data from the tap is dequeued.
While at it, fix the window scaling value sent for SYN and SYN, ACK
segments: we want to increase the data pointer after writing the
option, not the value itself.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
During handshake, the initial SYN, ACK segment to the guest, send as
a response to the SYN segment, needs to report the unscaled value for
the window, given that the handshake hasn't completed yet.
While at it, fix the endianness for the window value in case TCP
parameters can't be queried via TCP_INFO and we need to use the
default value.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The most common case is actually that no other instance created a
socket with that name -- and that also means there is no other
instance.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
It turns out that binding ICMP/ICMPv6 echo sockets takes a long
time. Instead of binding all of them (one for each possible echo
identification number, that is, 2^17) at start-up, bind them as
ICMP/ICMPv6 packets are sent by the guest.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The guest might try to resolve hosts other than the main host
namespace (i.e. the gateway) -- just recycle the target address from
the request and resolve it to the MAC address of the gateway.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
...sharing the same filesystem. Instead of a fixed path for the UNIX
domain socket, passt now uses a path with a counter, probing for
existing instances, and picking the first free one.
The demo script is updated accordingly -- it can now be started several
times to create multiple namespaces with an instance of passt each,
with addressing reflecting separate subnets, and NDP proxying between
them.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
and, given that the connection table is indexed by socket number,
we also need to increase MAX_CONNS now as the ICMP implementation
needs 2^17 sockets, that will be opened before TCP connections are
accepted.
This needs to be changed later: the connection table should be
indexed by a translated number -- we're wasting 2^17 table entries
otherwise. Move initialisation of TCP listening sockets as last
per-protocol initialisation, this will make it easier.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Open and bind a socket for each possible ICMP/ICMPv6 echo identifier,
and add a tracking mechanism. Otherwise, multiple pings in parallel
won't work, and a single ping to a different destination would make
an existing ping sequence stop working.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The socket isn't necessarily closed, make sure we close it before
getting a new one from accept(), so that we don't mix it up with
protocol sockets numbering.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
With -DDEBUG, passt now saves guest-side traffic captures in
pcap format at /tmp/passt_<ISO8601 timestamp>.pcap. The timestamp
refers to time and date of start-up.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
As libvirt can pass e1000e (not just e1000) devices as well,
make sure we also drop those network devices from the command
line before adding the parameters we need.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Add support for a variable amount of DNS servers, including zero,
from /etc/resolv.conf, in DHCP, NDP and DHCPv6 implementations.
Introduce support for domain search list for DHCP (RFC 3397),
NDP (RFC 8106), and DHCPv6 (RFC 3646), also sourced from
/etc/resolv.conf.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
