tcp_sock[46]_iov_init() initialize the length of each iovec buffer to
MSS_DEFAULT. That will always be overwritten before use in
tcp_data_to_tap, so it's redundant. It also wasn't correct, because it
didn't correctly account for the header lengths in all cases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We have separate IPv4 and IPv6 versions of a macro to construct an
initializer for ethernet headers. However, now that we have htons_constant
it's easy to simply paramterize this with the ethernet protocol number.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Both the TCP and UDP iov_init functions have some large structure literals
defined in "field order" style. These are pretty hard to read since it's
not obvious what value corresponds to what field. Use named field style
initializers instead to make this clearer.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The functions which do the final steps of sending TCP packets on through
the tap interface - tcp_l2_buf_flush*() - no longer have anything that's
actually specific to TCP in them, other than comments and names. Move them
all to tap.c.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
tcp_l2_buf_flush() open codes the loop across each frame in a group, but
but calls tcp_l2_buf_write_one() to send each frame to the pasta tuntap
device. Combine these two pasta-specific operations into
tcp_l2_buf_flush_pasta() which is a little cleaner and will enable further
cleanups.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently this takes a msghdr, but the only thing we actually care
about in there is the io vector. Make it take an io vector directly.
We also have a weird side effect of zeroing @buf_used. Just pass this
by value and zero it in the caller instead.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
tcp[46]_l2_buf_bytes keep track of the total number of bytes we have
queued to send to the tap interface. tcp_l2_buf_flush_passt() uses this
to determine if sendmsg() has sent all the data we requested, or whether
we need to resend a trailing portion.
However, the logic for finding where we're up to in the case of a short
sendmsg() can equally well tell whether we've had one at all, without
knowing the total number in advance. This does require an extra loop after
each sendmsg(), but it's doing simple arithmetic on values we've already
been accessing, and it leads to overall simpler code.
tcp[46]_l2_flags_buf_bytes were being calculated, but never used for
anything, so simply remove them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
tcp_l2_buf_flush() open codes the "primary" send of message to the passt
tap interface, but calls tcp_l2_buf_flush_part() to handle the case of a
short send. Combine these two passt-specific operations into
tcp_l2_buf_flush_passt() which is a little cleaner and will enable furrther
cleanups.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
pcapm() captures multiple frames from a msghdr, however the only thing it
cares about in the msghdr is the list of buffers, where it assumes there is
one frame to capture per buffer. That's what we want for its single caller
but it's not the only obvious choice here (one frame per msghdr would
arguably make more sense in isolation). In addition pcapm() has logic
that only makes sense in the context of the passt specific path its called
from: it skips the first 4 bytes of each buffer, because those have the
qemu vnet_len rather than the frame proper.
Make this clearer by replacing pcapm() with pcap_multiple() which more
explicitly takes one struct iovec per frame, and parameterizes how much of
each buffer to skip (i.e. the offset of the frame within the buffer).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reported by Coverity (CWE-606, Untrusted loop bound), and actually
harmless because we'll exit the option-scanning loop if the remaining
length is not enough for a new option, instead of reading past the
header.
In any case, it looks like a good idea to explicitly check for
reasonable values of option lengths.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
The pointers are actually the same, but we later pass the container
union to tcp_table_compact(), which might zero the size of the whole
union, and this confuses Coverity Scan.
Given that we have pointers to the container union to start with,
just pass those instead, all the way down to tcp_table_compact().
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Platforms like Linux allow IPv6 sockets to listen for IPv4 connections as
well as native IPv6 connections. By doing this we halve the number of
listening sockets we need for TCP (assuming passt/pasta is listening on the
same ports for IPv4 and IPv6). When forwarding many ports (e.g. -t all)
this can significantly reduce the amount of kernel memory that passt
consumes.
When forwarding all TCP and UDP ports for both IPv4 and IPv6 (-t all
-u all), this reduces kernel memory usage from ~677MiB to ~487MiB
(kernel version 6.0.8 on Fedora 37, x86_64).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Previous cleanups mean that tcp_sock_init4() and tcp_sock_init6() are
almost identical, and the remaining differences can be easily
parameterized. Combine both into a single tcp_sock_init_af() function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
passt usually doesn't NAT, but it does do so for the remapping of the
gateway address to refer to the host. Currently we perform this NAT with
slightly different rules on both IPv4 addresses and IPv6 addresses, but not
on IPv4-mapped IPv6 addresses. This means we won't correctly handle the
case of an IPv4 connection over an IPv6 socket, which is possible on Linux
(and probably other platforms).
Refactor tcp_conn_from_sock() to perform the NAT after converting either
address family into an inany_addr, so IPv4 and and IPv4-mapped addresses
have the same representation.
With two new helpers this lets us remove the IPv4 and IPv6 specific paths
from tcp_conn_from_sock().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This bit in the TCP specific epoll reference indicates whether the
connection is IPv6 or IPv4. However the sites which refer to it are
already calling accept() which (optionally) returns an address for the
remote end of the connection. We can use the sa_family field in that
address to determine the connection type independent of the epoll
reference.
This does have a cost: for the spliced case, it means we now need to get
that address from accept() which introduces an extran copy_to_user().
However, in future we want to allow handling IPv4 connectons through IPv6
sockets, which means we won't be able to determine the IP version at the
time we create the listening socket and epoll reference. So, at some point
we'll have to pay this cost anyway.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
It looks like tcp_seq_init() is supposed to advance the sequence number
by one every 32ns. However we only right shift the ns part of the timespec
not the seconds part, meaning that we'll advance by an extra 32 steps on
each second.
I don't know if that's exploitable in any way, but it doesn't appear to be
the intent, nor what RFC 6528 suggests.
In addition, we convert from seconds to nanoseconds with a multiplication
by '1E9'. In C '1E9' is a floating point constant, forcing a conversion
to floating point and back for what should be an integer calculation
(confirmed with objdump and Makefile default compiler flags). Spell out
1000000000 in full to avoid that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
tcp_seq_init() takes a number of parameters for the connection, but at
every call site, these are already populated in the tcp_conn structure.
Likewise we always store the result into the @seq_to_tap field.
Use this to simplify tcp_seq_init().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
tcp_seq_init() has separate paths for IPv4 and IPv6 addresses, which means
we will calculate different sequence numbers for IPv4 and equivalent
IPv4-mapped IPv6 addresses.
Change it to treat these the same by always converting the input address
into an inany_addr representation and use that to calculate the sequence
number.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
tcp_hash_match() can take either an IPv4 (struct in_addr) or IPv6 (struct
in6_addr) address. It has two different paths for each of those cases.
However, its only caller has already constructed an equivalent inany
representation of the address, so we can have tcp_hash_match take that
directly and use a simpler comparison with the inany_equals() helper.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
tcp_hash_insert() takes an address to control which hash bucket the
connection will go into. However, an inany_addr representation of that
address is already stored in struct tcp_conn.
Now that we've made the hashing of IPv4 and IPv4-mapped IPv6 addresses
equivalent, we can simplify tcp_hash_insert() to use the address in
struct tcp_conn, rather than taking it as an extra parameter.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In the tcp_conn structure, we represent the address with an inany_addr
which could be an IPv4 or IPv6 address. However, we have different paths
which will calculate different hashes for IPv4 and equivalent IPv4-mapped
IPv6 addresses. This will cause problems for some future changes.
Make the hash function work the same for these two cases, by taking an
inany_addr directly. Since this represents IPv4 and IPv4-mapped IPv6
addresses the same way, it will trivially hash the same for both cases.
Callers are changed to construct an inany_addr from whatever they have.
Some of that will be elided in later changes.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
struct tcp_conn stores an address which could be IPv6 or IPv4 using a
union. We can do this without an additional tag by encoding IPv4 addresses
as IPv4-mapped IPv6 addresses.
This approach is useful wider than the specific place in tcp_conn, so
expose a new 'union inany_addr' like this from a new inany.h. Along with
that create a number of helper functions to make working with these "inany"
addresses easier.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently when we insert a connection into the hash table, we store its
bucket number so we can find it when removing entries. However, we can
recompute the hash value from other contents of the structure so we don't
need to store it. This brings the size of tcp_tap_conn down to 64 bytes
again, which means it will fit in a single cacheline on common machines.
This change also removes a non-obvious constraint that the hash table have
less than twice TCP_MAX_CONNS buckets, because of the way
TCP_HASH_BUCKET_BITS was constructed.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently the epoll reference for tcp sockets includes a bit indicating
whether the socket maps to a spliced connection. However, the reference
also has the index of the connection structure which also indicates whether
it is spliced. We can therefore avoid the splice bit in the epoll_ref by
unifying the first part of the non-spliced and spliced handlers where we
look up the connection state.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In pasta mode, tcp_sock_init[46]() create separate sockets to listen for
spliced connections (these are bound to localhost) and non-spliced
connections (these are bound to the host address). This introduces a
subtle behavioural difference between pasta and passt: by default, pasta
will listen only on a single host address, whereas passt will listen on
all addresses (0.0.0.0 or ::). This also prevents us using some additional
optimizations that only work with the unspecified (0.0.0.0 or ::) address.
However, it turns out we don't need to do this. We can splice a connection
if and only if it originates from the loopback address. Currently we
ensure this by having the "spliced" listening sockets listening only on
loopback. Instead, defer the decision about whether to splice a connection
until after accept(), by checking if the connection was made from the
loopback address.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In tcp_sock_handler() we split off to handle spliced sockets before
checking anything else. However the first steps of the "new connection"
path for each case are the same: allocate a connection entry and accept()
the connection.
Remove this duplication by making tcp_conn_from_sock() handle both spliced
and non-spliced cases, with help from more specific tcp_tap_conn_from_sock
and tcp_splice_conn_from_sock functions for the later stages which differ.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
tcp_sock_init*() can create either sockets listening on the host, or in
the pasta network namespace (with @ns==1). There are, however, a number
of differences in how these two cases work in practice though. "ns"
sockets are only used in pasta mode, and they always lead to spliced
connections only. The functions are also only ever called in "ns" mode
with a NULL address and interface name, and it doesn't really make sense
for them to be called any other way.
Later changes will introduce further differences in behaviour between these
two cases, so it makes more sense to use separate functions for creating
the ns listening sockets than the regular external/host listening sockets.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There is very little common between the tcp_tap_conn and tcp_splice_conn
structures. However, both do have an IN_EPOLL flag which has the same
meaning in each case, though it's stored in a different location.
Simplify things slightly by moving this bit into the common header of the
two structures.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
These two functions scan all the non-splced and spliced connections
respectively and perform timed updates on them. Avoid scanning the now
unified table twice, by having tcp_timer scan it once calling the
relevant per-connection function for each one.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
These two functions each step through non-spliced and spliced connections
respectively and clean up entries for closed connections. To avoid
scanning the connection table twice, we merge these into a single function
which scans the unified table and performs the appropriate sort of cleanup
action on each one.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently spliced and non-spliced connections are stored in completely
separate tables, so there are completely independent limits on the number
of spliced and non-spliced connections. This is a bit counter-intuitive.
More importantly, the fact that the tables are separate prevents us from
unifying some other logic between the two cases. So, merge these two
tables into one, using the 'c.spliced' common field to distinguish between
them when necessary.
For now we keep a common limit of 128k connections, whether they're spliced
or non-spliced, which means we save memory overall. If necessary we could
increase this to a 256k or higher total, which would cost memory but give
some more flexibility.
For now, the code paths which need to step through all extant connections
are still separate for the two cases, just skipping over entries which
aren't for them. We'll improve that in later patches.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
When we compact the connection tables (both spliced and non-spliced) we
need to move entries from one slot to another. That requires some updates
in the entries themselves. Add helpers to make all the necessary updates
for the spliced and non-spliced cases. This will simplify later cleanups.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently, the tables for spliced and non-spliced connections are entirely
separate, with different types in different arrays. We want to unify them.
As a first step, create a union type which can represent either a spliced
or non-spliced connection. For them to be distinguishable, the individual
types need to have a common header added, with a bit indicating which type
this structure is.
This comes at the cost of increasing the size of tcp_tap_conn to over one
(64 byte) cacheline. This isn't ideal, but it makes things simpler for now
and we'll re-optimize this later.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently spliced and non-spliced connections use completely independent
tracking structures. We want to unify these, so as a preliminary step move
the definitions for both variants into a new tcp_conn.h header, shared by
tcp.c and tcp_splice.c.
This requires renaming some #defines with the same name but different
meanings between the two cases. In the process we correct some places that
are slightly out of sync between the comments and the code for various
event bit names.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The macro CONN_OR_NULL() is used to look up connections by index with
bounds checking. Replace it with an inline function, which means:
- Better type checking
- No danger of multiple evaluation of an @index with side effects
Also add a helper to perform the reverse translation: from connection
pointer to index. Introduce a macro for this which will make later
cleanups easier and safer.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If we disable a given IP version automatically (no corresponding
default route on host) or administratively (--ipv4-only or
--ipv6-only options), we don't initialise related buffers and
services (DHCP for IPv4, NDP and DHCPv6 for IPv6). The "tap"
handlers will also ignore packets with a disabled IP version.
However, in commit 3c6ae62510 ("conf, tcp, udp: Allow address
specification for forwarded ports") I happily changed socket
initialisation functions to take AF_UNSPEC meaning "any enabled
IP version", but I forgot to add checks back for the "enabled"
part.
Reported by Paul: on a host without default IPv6 route, but IPv6
enabled, connect, using IPv6, to a port handled by pasta, which
tries to send data to a tap device without initialised buffers
for that IP version and exits because the resulting write() fails.
Simpler way to reproduce: pasta -6 and inbound IPv4 connection, or
pasta -4 and inbound IPv6 connection.
Reported-by: Paul Holzinger <pholzing@redhat.com>
Fixes: 3c6ae62510 ("conf, tcp, udp: Allow address specification for forwarded ports")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
A number of functions describe themselves as taking a pointer to 'sin_addr
or sin6_addr'. Those are field names, not type names. Replace them with
the correct type names, in_addr or in6_addr.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We recently corrected some errors handling the endianness of IPv4
addresses. These are very easy errors to make since although we mostly
store them in network endianness, we sometimes need to manipulate them in
host endianness.
To reduce the chances of making such mistakes again, change to always using
a (struct in_addr) instead of a bare in_addr_t or uint32_t to store network
endian addresses. This makes it harder to accidentally do arithmetic or
comparisons on such addresses as if they were host endian.
We introduce a number of IN4_IS_ADDR_*() helpers to make it easier to
directly work with struct in_addr values. This has the additional benefit
of making the IPv4 and IPv6 paths more visually similar.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If the user specifies an explicit loopback address for a port
binding, we're going to use that address for the 'tap' socket, and
the same exact address for the 'spliced' socket (because those are,
by definition, only bound to loopback addresses).
This means that the second binding will fail, and, unexpectedly, the
port is forwarded, but via tap device, which means the source address
in the namespace won't be a loopback address.
Make it explicit under which conditions we're creating which kind of
socket, by refactoring tcp_sock_init() into two separate functions
for IPv4 and IPv6 and gathering those conditions at the beginning.
Also, don't create spliced sockets if the user specifies explicitly
a non-loopback address, those are harmless but not desired either.
Fixes: 3c6ae62510 ("conf, tcp, udp: Allow address specification for forwarded ports")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In pasta mode, when we receive a new inbound connection, we need to
select a socket that was created in the namespace to proceed and
connect() it to its final destination.
The existing condition might pick a wrong socket, though, if the
destination port is remapped, because we'll check the bitmap of
inbound ports using the remapped port (stored in the epoll reference)
as index, and not the original port.
Instead of using the port bitmap for this purpose, store this
information in the epoll reference itself, by adding a new 'outbound'
bit, that's set if the listening socket was created the namespace,
and unset otherwise.
Then, use this bit to pick a socket on the right side.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Fixes: 33482d5bf2 ("passt: Add PASTA mode, major rework")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
For tcp_sock_init_ns(), "inbound" connections used to be the ones
being established toward any listening socket we create, as opposed
to sockets we connect().
Similarly, tcp_splice_new() used to handle "inbound" connections in
the sense that they originated from listening sockets, and they would
in turn cause a connect() on an "outbound" socket.
Since commit 1128fa03fe ("Improve types and names for port
forwarding configuration"), though, inbound connections are more
broadly defined as the ones directed to guest or namepsace, and
outbound the ones originating from there.
Update comments for those two functions.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Since kernel version 5.7, commit c427bfec18f2 ("net: core: enable
SO_BINDTODEVICE for non-root users"), we can bind sockets to
interfaces, if they haven't been bound yet (as in bind()).
Introduce an optional interface specification for forwarded ports,
prefixed by %, that can be passed together with an address.
Reported use case: running local services that use ports we want
to have externally forwarded:
https://github.com/containers/podman/issues/14425
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Logging to file is going to add some further complexity that we don't
want to squeeze into util.c.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Recent versions of cppcheck give a warning due to the NULL buffer passed
to recv() in tcp_sock_consume(). Since this apparently works, I assume
it's actually valid, but cppcheck doesn't know that recv() can take a NULL
buffer. So, use a suppression to get rid of the error.
Also add an unmatchedSuppression suppression since only some cppcheck
versions complain about this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Some versions of cppcheck could errneously report a NULL pointer deference
inside a sizeof(). This is now fixed in cppcheck upstream[0]. For systems
using an affected version, add a suppression to work around the bug. Also
add an unmatchedSuppression suppression so the suppression itself doesn't
cause a warning if you *do* have a fixed cppcheck.
[0] https://github.com/danmar/cppcheck/pull/4471
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Port numbers (for both TCP and UDP) are 16-bit, and so fit exactly into a
'short'. USHRT_MAX is therefore the maximum port number and this is widely
used in the code. Unfortunately, a lot of those places don't actually
want the maximum port number (USHRT_MAX == 65535), they want the total
number of ports (65536). This leads to a number of potentially nasty
consequences:
* We have buffer overruns on the port_fwd::delta array if we try to use
port 65535
* We have similar potential overruns for the tcp_sock_* arrays
* Interestingly udp_act had the correct size, but we can calculate it in
a more direct manner
* We have a logical overrun of the ports bitmap as well, although it will
just use an unused bit in the last byte so isnt harmful
* Many loops don't consider port 65535 (which does mitigate some but not
all of the buffer overruns above)
* In udp_invert_portmap() we incorrectly compute the reverse port
translation for return packets
Correct all these by using a new NUM_PORTS defined explicitly for this
purpose.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Port numbers are unsigned values, but we're storing them in (signed) int
variables in some places. This isn't actually harmful, because int is
large enough to hold the entire range of ports. However in places we don't
want to use an in_port_t (usually to avoid overflow on the last iteration
of a loop) it makes more conceptual sense to use an unsigned int. This will
also avoid some problems with later cleanups.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we've delayed initialization of the UDP specific "reverse" map
until udp_init(), the only difference between the various 'remap' functions
used in conf_ports() is which array they target. So, simplify by open
coding the logic into conf_ports() with a pointer to the correct mapping
array.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The configuration for how to forward ports in and out of the guest/ns is
divided between several different variables. For each connect direction
and protocol we have a mode in the udp/tcp context structure, a bitmap
of which ports to forward also in the context structure and an array of
deltas to apply if the outward facing and inward facing port numbers are
different. This last is a separate global variable, rather than being in
the context structure, for no particular reason. UDP also requires an
additional array which has the reverse mapping used for return packets.
Consolidate these into a re-used substructure in the context structure.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
enum conf_port_type is local to conf.c and is used to track the port
forwarding mode during configuration. We don't keep it around in the
context structure, however the 'init_detect_ports' and 'ns_detect_ports'
fields in the context are based solely on this. Rather than changing
encoding, just include the forwarding mode into the context structure.
Move the type definition to a new port_fwd.h, which is kind of trivial at
the moment but will have more stuff later.
While we're there, "conf_port_type" doesn't really convey that this enum is
describing how port forwarding is configured. Rename it to port_fwd_mode.
The variables (now fields) of this type also have mildly confusing names
since it's not immediately obvious whether 'ns' and 'init' refer to the
source or destination of the packets. Use "in" (host to guest / init to
ns) and "out" (guest to host / ns to init) instead.
This has the added bonus that we no longer have locals 'udp_init' and
'tcp_init' which shadow global functions.
In addition, add a typedef 'port_fwd_map' for a bitmap of each port number,
which is used in several places.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The context structure contains a batch of fields specific to IPv4 and to
IPv6 connectivity. Split those out into a sub-structure.
This allows the conf_ip4() and conf_ip6() functions, which take the
entire context but touch very little of it, to be given more specific
parameters, making it clearer what it affects without stepping through the
code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
After recent changes, conf_ip() now has essentially entirely disjoint paths
for IPv4 and IPv6 configuration. So, it's cleaner to split them out into
different functions conf_ip4() and conf_ip6().
Splitting these out also lets us make the interface a bit nicer, having
them return success or failure directly, rather than manipulating c->v4
and c->v6 to indicate success/failure of the two versions.
Since these functions may also initialize the interface index for each
protocol, it turns out we can then drop c->v4 and c->v6 entirely, replacing
tests on those with tests on whether c->ifi4 or c->ifi6 is non-zero (since
a 0 interface index is never valid).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Whitespace fixes]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
It's quite plausible for a host to have both IPv4 and IPv6 connectivity,
but only via different interfaces. For example, this will happen in the
case that IPv6 connectivity is via a tunnel (e.g. 6in4 or 6rd). It would
also happen in the case that IPv4 access is via a tunnel on an otherwise
IPv6 only local network, which is a setup that might become more common in
the post IPv4 address exhaustion world.
In turns out there's no real need for passt/pasta to get its IPv4 and IPv6
connectivity via the same interface, so we can handle this situation fairly
easily. Change the core to allow eparate external interfaces for IPv4 and
IPv6. We don't actually set these separately for now.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If the first packet_get() call doesn't assign len, the second one
will also return NULL, but gcc doesn't see this.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
gcc 12.1.x (e.g. current OpenSUSE Tumbleweed, x86_64 only,
gcc-12-1.4.x86_64) reports:
tcp.c: In function ‘tcp_send_flag’:
tcp.c:1014:9: warning: writing 16 bytes into a region of size 0 [-Wstringop-overflow=]
1014 | memcpy(low_rtt_dst + hole++, &conn->a.a6, sizeof(conn->a.a6));
| ^
tcp.c:559:24: note: at offset -16 into destination object ‘low_rtt_dst’ of size 128
559 | static struct in6_addr low_rtt_dst[LOW_RTT_TABLE_SIZE];
|
but 'hole' can't be -1, because the low_rtt_dst table is guaranteed
to have a hole: if we happened to write to the last entry, we'll go
back to index 0 and clear that one.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This feature is available in slirp4netns but was missing in passt and
pasta.
Given that we don't do dynamic memory allocation, we need to bind
sockets while parsing port configuration. This means we need to
process all other options first, as they might affect addressing and
IP version support. It also implies a minor rework of how TCP and UDP
implementations bind sockets.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reported by Coverity: it doesn't see that tcp{4,6}_l2_buf_used are
set to zero by tcp_l2_data_buf_flush(), repeat that explicitly here.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
All instances were harmless, but it might be useful to have some
debug messages here and there. Reported by Coverity.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Field doff in struct tcp_hdr is 4 bits wide, so optlen in
tcp_tap_handler() is already bound, but make that explicit.
Reported by Coverity.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The existing sizes provide no measurable differences in throughput
and packet rates at this point. They were probably needed as batched
implementations were not complete, but they can be decreased quite a
bit now.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
...we don't really need two extra bits, but it's easier to organise
things differently than to silence this.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Implement a packet abstraction providing boundary and size checks
based on packet descriptors: packets stored in a buffer can be queued
into a pool (without storage of its own), and data can be retrieved
referring to an index in the pool, specifying offset and length.
Checks ensure data is not read outside the boundaries of buffer and
descriptors, and that packets added to a pool are within the buffer
range with valid offset and indices.
This implies a wider rework: usage of the "queueing" part of the
abstraction mostly affects tap_handler_{passt,pasta}() functions and
their callees, while the "fetching" part affects all the guest or tap
facing implementations: TCP, UDP, ICMP, ARP, NDP, DHCP and DHCPv6
handlers.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
...by:
- storing the chained-hash next connection pointer as numeric
reference rather than as pointer
- storing the MSS as 14-bit value, and rounding it
- using only the effective amount of bits needed to store the hash
bucket number
- explicitly limiting window scaling factors to 4-bit values
(maximum factor is 14, from RFC 7323)
- scaling SO_SNDBUF values, and using a 8-bit representation for
the duplicate ACK sequence
- keeping window values unscaled, as received and sent
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We can't take for granted that the hard limit for open files is
big enough as to allow to delay closing sockets to a timer.
Store the value of RTLIMIT_NOFILE we set at start, and use it to
understand if we're approaching the limit with pending, spliced
TCP connections. If that's the case, close sockets right away as
soon as they're not needed, instead of deferring this task to a
timer.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
With a lot of concurrent connections, the bitmap scan approach is
not really sustainable.
Switch to per-connection timerfd timers, set based on events and on
two new flags, ACK_FROM_TAP_DUE and ACK_TO_TAP_DUE. Timers are added
to the common epoll list, and implement the existing timeouts.
While at it, drop the CONN_ prefix from flag names, otherwise they
get quite long, and fix the logic to decide if a connection has a
local, possibly unreachable endpoint: we shouldn't go through the
rest of tcp_conn_from_tap() if we reset the connection due to a
successful bind(2), and we'll get EACCES if the port number is low.
Suggested by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This should never happen, but there are no formal guarantees: ensure
socket numbers are below SOCKET_MAX.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Using events and flags instead of states makes the implementation
much more straightforward: actions are mostly centered on events
that occurred on the connection rather than states.
An example is given by the ESTABLISHED_SOCK_FIN_SENT and
FIN_WAIT_1_SOCK_FIN abominations: we don't actually care about
which side started closing the connection to handle closing of
connection halves.
Split out the spliced implementation, as it has very little in
common with the "regular" TCP path.
Refactor things here and there to improve clarity. Add helpers
to trace where resets and flag settings come from.
No functional changes intended.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In pasta mode, when we get data from sockets and write it as single
frames to the tap device, we batch receive operations considerably,
and then (conceptually) split the data in many smaller writes.
It looked like an obvious choice, but performance is actually better
if we receive data in many small frame-sized recvmsg()/recvmmsg().
The syscall overhead with the previous behaviour, observed by perf,
comes predominantly from write operations, but receiving data in
shorter chunks probably improves cache locality by a considerable
amount.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
To reach (at least) a conceptually equivalent security level as
implemented by --enable-sandbox in slirp4netns, we need to create a
new mount namespace and pivot_root() into a new (empty) mountpoint, so
that passt and pasta can't access any filesystem resource after
initialisation.
While at it, also detach IPC, PID (only for passt, to prevent
vulnerabilities based on the knowledge of a target PID), and UTS
namespaces.
With this approach, if we apply the seccomp filters right after the
configuration step, the number of allowed syscalls grows further. To
prevent this, defer the application of seccomp policies after the
initialisation phase, before the main loop, that's where we expect bad
things to happen, potentially. This way, we get back to 22 allowed
syscalls for passt and 34 for pasta, on x86_64.
While at it, move #syscalls notes to specific code paths wherever it
conceptually makes sense.
We have to open all the file handles we'll ever need before
sandboxing:
- the packet capture file can only be opened once, drop instance
numbers from the default path and use the (pre-sandbox) PID instead
- /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection
of bound ports in pasta mode, are now opened only once, before
sandboxing, and their handles are stored in the execution context
- the UNIX domain socket for passt is also bound only once, before
sandboxing: to reject clients after the first one, instead of
closing the listening socket, keep it open, accept and immediately
discard new connection if we already have a valid one
Clarify the (unchanged) behaviour for --netns-only in the man page.
To actually make passt and pasta processes run in a separate PID
namespace, we need to unshare(CLONE_NEWPID) before forking to
background (if configured to do so). Introduce a small daemon()
implementation, __daemon(), that additionally saves the PID file
before forking. While running in foreground, the process itself can't
move to a new PID namespace (a process can't change the notion of its
own PID): mention that in the man page.
For some reason, fork() in a detached PID namespace causes SIGTERM
and SIGQUIT to be ignored, even if the handler is still reported as
SIG_DFL: add a signal handler that just exits.
We can now drop most of the pasta_child_handler() implementation,
that took care of terminating all processes running in the same
namespace, if pasta started a shell: the shell itself is now the
init process in that namespace, and all children will terminate
once the init process exits.
Issuing 'echo $$' in a detached PID namespace won't return the
actual namespace PID as seen from the init namespace: adapt
demo and test setup scripts to reflect that.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
clang-tidy from LLVM 13.0.1 reports some new warnings from these
checkers:
- altera-unroll-loops, altera-id-dependent-backward-branch: ignore
for the moment being, add a TODO item
- bugprone-easily-swappable-parameters: ignore, nothing to do about
those
- readability-function-cognitive-complexity: ignore for the moment
being, add a TODO item
- altera-struct-pack-align: ignore, alignment is forced in protocol
headers
- concurrency-mt-unsafe: ignore for the moment being, add a TODO
item
Fix bugprone-implicit-widening-of-multiplication-result warnings,
though, that's doable and they seem to make sense.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The existing behaviour is not really practical: an automated agent in
charge of starting both qemu and passt would need to fork itself to
start passt, because passt won't fork to background until qemu
connects, and the agent needs to unblock to start qemu.
Instead of waiting for a connection to daemonise, do it right away as
soon as a socket is available: that can be considered an initialised
state already.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Depending on the C library, but not necessarily in all the
functions we use, statx() might be used instead of stat(),
getdents() instead of getdents64(), readlinkat() instead of
readlink(), openat() instead of open().
On aarch64, it's clone() and not fork(), and dup3() instead of
dup2() -- just allow the existing alternative instead of dealing
with per-arch selections.
Since glibc commit 9a7565403758 ("posix: Consolidate fork
implementation"), we need to allow set_robust_list() for
fork()/clone(), even in a single-threaded context.
On some architectures, epoll_pwait() is provided instead of
epoll_wait(), but never both. Same with newfstat() and
fstat(), sigreturn() and rt_sigreturn(), getdents64() and
getdents(), readlink() and readlinkat(), unlink() and
unlinkat(), whereas pipe() might not be available, but
pipe2() always is, exclusively or not.
Seen on Fedora 34: newfstatat() is used on top of fstat().
syslog() is an actual system call on some glibc/arch combinations,
instead of a connect()/send() implementation.
On ppc64 and ppc64le, _llseek(), recv(), send() and getuid()
are used. For ppc64 only: ugetrlimit() for the getrlimit()
implementation, plus sigreturn() and fcntl64().
On s390x, additionally, we need to allow socketcall() (on top
of socket()), and sigreturn() also for passt (not just for
pasta).
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Bitmap manipulating functions would otherwise refer to inconsistent
sets of bits on big-endian architectures. While at it, fix up a
couple of casts.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
tcpi_bytes_acked and tcpi_min_rtt are only available on recent
kernel versions: provide fall-back paths (incurring some grade of
performance penalty).
Support for getrandom() was introduced in Linux 3.17 and glibc 2.25:
provide an alternate mechanism for that as well, reading from
/dev/random.
Also check if NETLINK_GET_STRICT_CHK is defined before using it:
it's not strictly needed, we'll filter out irrelevant results from
netlink anyway.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This is the only remaining Linux-specific include -- drop it to avoid
clang-tidy warnings and to make code more portable.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This was actually fine "on the wire", but it's inconsistent with the
way we hash other addresses/protocols and also ends up with a wrong
endianness in captures in case we replace the address with our
default gateway.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
...mostly false positives, but a number of very relevant ones too,
in tcp_get_sndbuf(), tcp_conn_from_tap(), and siphash PREAMBLE().
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Unions and structs, you all have names now.
Take the chance to enable bugprone-reserved-identifier,
cert-dcl37-c, and cert-dcl51-cpp checkers in clang-tidy.
Provide a ffsl() weak declaration using gcc built-in.
Start reordering includes, but that's not enough for the
llvm-include-order checker yet.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Detect missing tcpi_snd_wnd in struct tcp_info at build time,
otherwise build fails with a pre-5.3 linux/tcp.h header.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This shouldn't happen on any sane configuration, but I just met an
example of that: the default IPv6 gateway on the host is configured
with a global unicast address, we use that as source for RA, DHCPv6
replies, and the guest ignores it. Same later on if we talk TCP or
UDP and the guest has no idea where that address comes from.
Use our link-local address in case the gateway address is global.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
A mix of unchecked return values, a missing permission mask for
open(2) with O_CREAT, and some false positives from
-Wstringop-overflow and -Wmaybe-uninitialized.
Reported-by: Martin Hauke <mardnh@gmx.de>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
For some reason, on 4.19, splice() doesn't honour SOCK_NONBLOCK from
accept4() while reading from a TCP socket. Pass SPLICE_F_NONBLOCK
explicitly in all cases.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If the window isn't updated on !c->tcp.kernel_snd_wnd, we still
have to send ACKs if the ACK sequence was updated, or if an error
occurred while querying TCP_INFO.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
...and while at it, reverse the operands in the window equality
comparison to detect the need for fast re-transmit: it's easier
to read this way.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
I thought I'd get away with it, but no, after some clean-ups, I
finally got a socket with number 0. Fix up all the convenient,
yet botched assumptions.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Caching iov_len for messages from socket doesn't actually decrease
overhead by the tiniest bit, and added a lot of complexity. Drop
that.
Also drop the sendmmsg(), we don't need to send multiple messages
with TCP, as long as we make sure no messages with a length
descriptor are sent partially, qemu is fine with it.
Just like it's done for segments without data (flags), also defer
the sendmsg() for sending data segments, to improve batching.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
