To keep this simple, only support tests that have corresponding setup
and teardown functions implied by their path. For example:
./run passt/ndp
will trigger the 'passt' setup and teardown functions.
This is not really elegant, but it looks robust, and while David is
considering proper alternatives, it should be quite useful.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Add the -Wextra -pedantic and -std=c99 flags when compiling the nsholder
test helper to get extra compiler checks, like we already use for the
main source code.
While we're there, fix some %d (signed) printf descriptors being used
for unsigned values (uid_t and gid_t). Pointed out by cppcheck.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This loop goes through and gives a numeric label to each pane, even though
we name the panes properly shortly thereafter. Looks like a leftover from
some earlier version. Remove it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Many of our tests are based around performing transfers of sample data
across passt/pasta created links. The data flow here can be a bit
hard to follow since, e.g. we create a file transfer it to the guest,
then transfer it back to the host across several different tests.
This also means that the test cases aren't independent of each other.
Because we don't have the original file available at both ends in some
cases, we compare them by generating md5sums at each end and comparing
them, which is a bit complicated.
Make a number of changes to simplify this:
1. Pre-generate the sample data files as a test asset, rather than
building them on the fly during the tests proper
2. Include the sample data files in the mbuto guest image
3. Because we have good copies of the original data available in all
contexts, we can now simply use 'cmp' to check if the transfer
has worked, avoiding md5sum complications.
4. Similarly we can always use the original copy of the sample data
on the send side of each transfer, meaning that the tests become
more independent of each other.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The setup functions for passt_in_ns and two_guests perform some fairly slow
dhclient calls to configure the network in the namespace before starting
the guest. This isn't really part of the tests, just necessary for the
operations later.
We can simplify and speed this up a bit by using pasta's '--config-net'
option to configure the networking for us. As a bonus this means we have
at least a minimal test of the --config-net option itself.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
When we start passt or pasta, it may take a short time to be ready to
handle packets, especially if running under valgrind. We have a
number of semi-arbitrary fixed sleeps to account for this.
We can do this more robustly by exploiting the fact that pasta/passt
doesn't write its pidfile until it's ready to go, so if we wait for
the pidfile to be created, we can proceed with confidence.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
These are hangovers from older ways of shutting down the pasta/passt
processes and no longer serve any purpose.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Add a shell helper function to wait for some command to succeed - typically
a test for something to be done by a background process. Use it in the
context code which waits for the guest to respond to ssh-over-vsock
connections.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
It's not used anymore. While at it, fix the function name in the
comment to perf_report_append_js().
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
That's the default port for iperf3, which also means that it's quite
likely in use on my test machine. Use different port numbers: recycle
the scheme we use in tests for passt and pasta's demo, use 5221-5224
(a bit shorter) for the slirp4netns container in Podman's demo.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
A cd to __STATEDIR__ results in a rather long command, that's not
very readable. Jump between directories using .. and relative paths,
once we're there.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We won't necessarily run mbuto as part of regular tests: it can also
be used for demos or out-of-tree tests.
To keep the profile simple, leave the whole sshd setup there, which
is otherwise harmless, but don't fail if guest-key.pub is missing in
the current directory.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If we use dhclient without creating a complete network configuration,
systemd-resolved will stop working after a while, and this sometimes
happens while we're still installing packages.
Disable it, together with systemd-networkd, while taking care of
removing the dhclient hook that prevents overriding /etc/resolv.conf.
While at it, it looks like removing snapd and needrestart actually
takes more time than keeping them: drop that line.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
I'm not sure why, but dhclient hangs otherwise. This reflects what we
do in the passt_in_ns setup steps.
Eventually, this whole block could go away if we let pasta configure
this network namespace with --config-net.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Starting tcp_rr, tcp_crr, udp_rr servers in the guest takes a bit
longer than starting the corresponding clients on the host, and we
end up starting clients before servers unless we add a delay there.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If we start another server on the same port right away, we might fail
to bind the port. A small delay appears to be needed -- I'm not
entirely sure why at this point.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Unfortunately, this partially counters recent efforts by David to
speed up these tests, but it looks like iperf3 clients don't reliably
terminate, in some rare cases I couldn't isolate yet.
For the moment being, reintroduce the time-based wait approach, now
using the configurable test duration, and terminate the servers at
the end of it, in case they're stuck. There's no point in keeping
the 'sleep 2' later, so drop that, and while at it, make sure that
the stuck servers have time to flush the JSON output before we use
it.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
It appears that if we run throughput tests with one-second periodic
reports, the sending side of the vhost channel used for SSH-based
command dispatch occasionally stops working altogether. I haven't
investigated this further, all I see is that output is truncated
at some point, and doesn't resume.
If we use gzip compression (ssh -C) this happens less frequently,
but it still happens, seemingly indicating the issue is probably
related to vhost itself.
Disable periodic reports in iperf3 clients. The -i options were
actually redundant, so remove them from both test files as well as
from test_iperf3().
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
An iperf3 client might fail to send the control message indicating
the end of the test, if the kernel buffer doesn't accept it, and exit
without having sent it, as the control socket is non-blocking. Should
this happen, the server will just wait forever for this message,
instead of terminating.
Restore some of the behaviour that went away with the
"test: Rewrite test_iperf3" patch: instead of waiting on servers to
terminate, wait on the clients. When they are done, wait 2 seconds,
and then send SIGINT to the servers, which make them still write
out the JSON report before terminating.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If we don't, guest command dispatch will fail altogether, given that
we use cat(1) on the enter file, which contains spaces.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
It looks like the workaround for the virtio_net TX hang issue is
working less reliably with the new command dispatch mechanism, I'm
not sure why. Switch to 10 seconds, at least for the moment.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
There are some 'sleep 1' commands between starting the socat server
and its corresponding client to avoid races due to the server not
being ready as we start sending data.
However, those don't cover all the cases where we might need them,
and in some cases the sleep command actually ended up being before
the server even starts.
This fixes occasional failures in TCP and UDP simple transfer tests,
that became apparent with the new command dispatch mechanism.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Otherwise, we're depending on having /sbin in $PATH. For some reason
I didn't completely grasp, with the new command dispatch mechanism
that's not the case anymore, even if I have /sbin in $PATH in the
parent shell.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
We use the [ "$x" -eq "$x" ] syntax to check if $x is a number. The
behaviour is clearly implied by POSIX, but some shells might actually
report the (intended) error, and dash floods script.log with
"Illegal number" error messages. Hide them.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Because UDP is connectionless we don't have an in-built end-of-stream
signal for our connectivity tests. We work around this by explicitly
adding an end marker to our sample data and killing the listening end once
it is seen.
However, socat has some built-in options - null-eof and shut-null - which
can be used to signal the end of stream with a zero-length UDP packet.
Use these to simplify how the UDP tests are implemented.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The tests generate a performance report in $BASEPATH/perf.js and
hooks/pre-push copies it to the website. To avoid cluttering the working
directory, instead put perf.js in $LOGDIR/web, since it's a test output
artefact. Update hooks/pre-push to copy from its new location.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The asciinema video handling creates a number of temporary files (.uncat,
.start, .stop) which currently go into the source tree. Put them in the
temporary state directory to avoid clutter.
The final processed output is now placed into test_logs/web/ along with the
corresponding .js file with links, since they're essentially test
artefacts. hooks/pre-push is updated to look for those files in the new
location when updating the web site.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Avoiding putting them in bare /tmp means they will be automatically
cleaned up with everything else.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently they go in the passt source tree with a fixed names, which means
their presence can mess with subsequent test runs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The capture files are more or less a different form of log output from the
tests, so place them in $LOGDIR.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of using the 'temp' and 'tempdir' DSL directives to create
temporary files, use fixed paths relative to __STATEDIR__. This has two
advantages:
1) The files are automatically cleaned up if the tests fail (and even if
that doesn't work they're easier to clean up manuall)
2) When debugging tests it's easier to figure out which of the temporary
files are relevant to whatever's going wrong
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the context command dispatch subsystem creates a bunch of
temporary files in $LOGDIR, which is messy. Store them in $STATEDIR which
is for precisely this purpose. The logs from each context still go into
$LOGDIR.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We use this fifo to send messages to the information pane. Put it in the
state directory so it doesn't need its own cleanup.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The test scripts create a bunch of temporary files to keep track of
internal state. Some are made in /tmp with individual mktemp calls, some
go in the passt source directory, and some go in $LOGDIR. This can
sometimes make it messy to clean up after failed test runs.
Start cleaning this up by creating a single "state" directory ($STATEBASE)
in /tmp for all the state or temporary files used by a single test run.
Clean it up automatically in cleanup() - except when DEBUG==1, because
those files can be useful for debugging test script failures.
We create subdirectories under $STATEBASE for each setup function, exposed
as $STATESETUP. We also create subdirectories for each test script and
expose those to the scripts as __STATEDIR__.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We install a cleanup() function with 'trap' in order to clean up temporary
files we generate during the tests. However, we deinstall it after
run_term, which means it won't run in most of the cases where it would be
useful. Even if "run from_term" exits with an error, that error will be
hidden from the run_term wrapper because it's within a tmux session, so we
will return from run_term normally, uninstall the trap and never clean up.
In fact there's no reason to uninstall the trap at all, it works just as
well on the success exit path as an error exit path.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For example, passt/dhcp rather than dhcp/passt. This is more
consistent with the two_guests and other test groups, and makes some
other cleanups simpler.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Put the pieces together to use the new style context based dispatch for
the passt_in_pasta tests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we have all the pieces we need for issuing commands both into
namespaces and into guests, we can use those to convert the two_guests to
using only the new style context command issue.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Extends the context system in the test scripts to allow executing commands
within a guest. Do this without requiring an existing network in the guest
by using socat to run ssh via a vsock connection.
We do need some additional "sleep"s in the tests, because the new
faster dispatch means that sometimes we attempt to connect before
socat has managed to listen.
For now, only use this for the plain "passt" tests. The "passt_in_ns" and
other tests have additional complications we still need to deal with.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Extend the context system to allow commands to be run in a namespace
created with unshare, and use it for the namespace used in the pasta tests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In our test scripts we need to do some ugly parsing of /proc and/or pstree
output in order to get the PIDs of processes running in namespaces so that
we can connect to those namespaces with nsenter or pasta.
This is actually a pretty tricky problem with standard tools. To determine
the PID from the outside of the namespace we need to know how the process
of interest is related to the unshare or pasta process (child? one of
several children? grandchild?) as well as then parsing /proc or ps output.
This is slightly awkward now, and will get worse with future changes I'd
like to make to have processes are dispatched.
The obvious solution would be to have the process of interest (which we
control) report its own PID, but that doesn't work easily, because it is in
a PID namepace and sees only its local PID not the global PID we need to
address it from outside.
To handle this, add a small custom tool, "nsholder". This takes a path
and a mode parameter. In "hold" mode it will create a unix domain socket
bound to the path and listening. In "pid" mode it will get the "hold"ing
process's pid via the unix socket using SO_PEERCRED, which translates
between PID namespaces. In "stop" mode it will send a message to the
socket causing the "hold"ing process to clean up and exit.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Convert the pasta and passt tests to use new-style context execution
for the things that run in the "passt" frame. Don't touch the
passt_in_ns or two_guests tests yet, because they run passt inside a
namespace which introduces some additional complications we have yet
to handle.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Convert most of the tests to use the new-style system for issuing commands
for all host commands. We leave the distro tests for now: they use
the same pane for both host and guest commands which we'll need some more
things to deal with.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We're creating a system for tests to more reliably execute commands in
various contexts (e.g. host, guest, namespace). That transition is going
to happen over a number of steps though, so in the meantime we need to deal
with both the old-style issuing of commands via typing into and screen
scraping tmux panels, and the new-style system for executing commands in
context.
Introduce some transitional helpers which will issue a command via context
if the requested context is initialized, but will otherwise fall back to
the old style tmux panel based method. Re-implement the various test DSL
commands in terms of these new helpers.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We're moving to a new way of the tests dispatching commands to running in
contexts (host, guest, namespace, etc.). As we make this transition,
though, we still want the user to be able to watch the commands running
in a context, as they previously could from the commands issued in the
pane.
Add a helper to set up a pane to watch a context's log to allow this. In
some cases we currently issue commands from several different logical
contexts in the same pane, so allow a pane to watch several contexts at
once. Also use tail's --retry option to allow starting the watch before
we've initialized the context which will be useful in some cases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
