Port numbers are unsigned values, but we're storing them in (signed) int
variables in some places. This isn't actually harmful, because int is
large enough to hold the entire range of ports. However in places we don't
want to use an in_port_t (usually to avoid overflow on the last iteration
of a loop) it makes more conceptual sense to use an unsigned int. This will
also avoid some problems with later cleanups.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
conf_ports() switches on the optname argument to select the target array
for several updates. Now that all these maps are in a common structure, we
can simplify by just passing in a pointer to the whole struct port_fwd to
update.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we've delayed initialization of the UDP specific "reverse" map
until udp_init(), the only difference between the various 'remap' functions
used in conf_ports() is which array they target. So, simplify by open
coding the logic into conf_ports() with a pointer to the correct mapping
array.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Because it's connectionless, when mapping UDP ports we need, in addition
to the table of deltas for destination ports needed by TCP, we need an
inverted table to translate the source ports on return packets.
Currently we fill out the inverted table at the same time we construct the
main table in udp_remap_to_tap() and udp_remap_to_init(). However, we
don't use either table until after we've initialized UDP, so we can delay
the construction of the reverse table to udp_init(). This makes the
configuration more symmetric between TCP and UDP which will enable further
cleanups.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The configuration for how to forward ports in and out of the guest/ns is
divided between several different variables. For each connect direction
and protocol we have a mode in the udp/tcp context structure, a bitmap
of which ports to forward also in the context structure and an array of
deltas to apply if the outward facing and inward facing port numbers are
different. This last is a separate global variable, rather than being in
the context structure, for no particular reason. UDP also requires an
additional array which has the reverse mapping used for return packets.
Consolidate these into a re-used substructure in the context structure.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
enum conf_port_type is local to conf.c and is used to track the port
forwarding mode during configuration. We don't keep it around in the
context structure, however the 'init_detect_ports' and 'ns_detect_ports'
fields in the context are based solely on this. Rather than changing
encoding, just include the forwarding mode into the context structure.
Move the type definition to a new port_fwd.h, which is kind of trivial at
the moment but will have more stuff later.
While we're there, "conf_port_type" doesn't really convey that this enum is
describing how port forwarding is configured. Rename it to port_fwd_mode.
The variables (now fields) of this type also have mildly confusing names
since it's not immediately obvious whether 'ns' and 'init' refer to the
source or destination of the packets. Use "in" (host to guest / init to
ns) and "out" (guest to host / ns to init) instead.
This has the added bonus that we no longer have locals 'udp_init' and
'tcp_init' which shadow global functions.
In addition, add a typedef 'port_fwd_map' for a bitmap of each port number,
which is used in several places.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Define the target machine architecture in lowercase.
The name of the executable qemu-system-* is defined from the build flags
and should be in lowercase:
( "qemu-system-" ARCH ),
I.e. qemu-system-x86_64 instead of qemu-system-X86_64. Otherwise, the
exec call will fail.
Signed-off-by: Vasiliy Ulyanov <vulyanov@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
As suggested by David: those emojis might not be entirely obvious.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
It's not used anymore. While at it, fix the function name in the
comment to perf_report_append_js().
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
That's the default port for iperf3, which also means that it's quite
likely in use on my test machine. Use different port numbers: recycle
the scheme we use in tests for passt and pasta's demo, use 5221-5224
(a bit shorter) for the slirp4netns container in Podman's demo.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
A cd to __STATEDIR__ results in a rather long command, that's not
very readable. Jump between directories using .. and relative paths,
once we're there.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The test_logs directory contains a directory: fix the wildcard so
that scp doesn't fail.
Terminal capture files are now deleted every time we re-run the
demo script: upload CI's .cast file before it's gone.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We won't necessarily run mbuto as part of regular tests: it can also
be used for demos or out-of-tree tests.
To keep the profile simple, leave the whole sshd setup there, which
is otherwise harmless, but don't fail if guest-key.pub is missing in
the current directory.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If we use dhclient without creating a complete network configuration,
systemd-resolved will stop working after a while, and this sometimes
happens while we're still installing packages.
Disable it, together with systemd-networkd, while taking care of
removing the dhclient hook that prevents overriding /etc/resolv.conf.
While at it, it looks like removing snapd and needrestart actually
takes more time than keeping them: drop that line.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
I'm not sure why, but dhclient hangs otherwise. This reflects what we
do in the passt_in_ns setup steps.
Eventually, this whole block could go away if we let pasta configure
this network namespace with --config-net.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Starting tcp_rr, tcp_crr, udp_rr servers in the guest takes a bit
longer than starting the corresponding clients on the host, and we
end up starting clients before servers unless we add a delay there.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If we start another server on the same port right away, we might fail
to bind the port. A small delay appears to be needed -- I'm not
entirely sure why at this point.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Unfortunately, this partially counters recent efforts by David to
speed up these tests, but it looks like iperf3 clients don't reliably
terminate, in some rare cases I couldn't isolate yet.
For the moment being, reintroduce the time-based wait approach, now
using the configurable test duration, and terminate the servers at
the end of it, in case they're stuck. There's no point in keeping
the 'sleep 2' later, so drop that, and while at it, make sure that
the stuck servers have time to flush the JSON output before we use
it.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
It appears that if we run throughput tests with one-second periodic
reports, the sending side of the vhost channel used for SSH-based
command dispatch occasionally stops working altogether. I haven't
investigated this further, all I see is that output is truncated
at some point, and doesn't resume.
If we use gzip compression (ssh -C) this happens less frequently,
but it still happens, seemingly indicating the issue is probably
related to vhost itself.
Disable periodic reports in iperf3 clients. The -i options were
actually redundant, so remove them from both test files as well as
from test_iperf3().
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
An iperf3 client might fail to send the control message indicating
the end of the test, if the kernel buffer doesn't accept it, and exit
without having sent it, as the control socket is non-blocking. Should
this happen, the server will just wait forever for this message,
instead of terminating.
Restore some of the behaviour that went away with the
"test: Rewrite test_iperf3" patch: instead of waiting on servers to
terminate, wait on the clients. When they are done, wait 2 seconds,
and then send SIGINT to the servers, which make them still write
out the JSON report before terminating.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If we don't, guest command dispatch will fail altogether, given that
we use cat(1) on the enter file, which contains spaces.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reported by David but also by Coverity (CWE-119):
In conf_ports: Out-of-bounds access to a buffer
...not in practice, because the allocation size is rounded up
anyway, but not nice either.
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reported by Coverity (CWE-119):
Negative value used as argument to a function expecting a
positive value (for example, size of buffer or allocation)
and harmless, because getsockopt() would return -EBADF if the
socket is -1, so we wouldn't print anything.
Check if accept4() returns a valid socket before calling getsockopt()
on it.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
It looks like the workaround for the virtio_net TX hang issue is
working less reliably with the new command dispatch mechanism, I'm
not sure why. Switch to 10 seconds, at least for the moment.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
We now have official packages for Fedora, unofficial (Fedora Copr)
for other common RPM-based distributions, and the existing
packages with static builds for Debian, and for other RPM-based
distributions.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There are some 'sleep 1' commands between starting the socat server
and its corresponding client to avoid races due to the server not
being ready as we start sending data.
However, those don't cover all the cases where we might need them,
and in some cases the sleep command actually ended up being before
the server even starts.
This fixes occasional failures in TCP and UDP simple transfer tests,
that became apparent with the new command dispatch mechanism.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Otherwise, we're depending on having /sbin in $PATH. For some reason
I didn't completely grasp, with the new command dispatch mechanism
that's not the case anymore, even if I have /sbin in $PATH in the
parent shell.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
...and not in pasta's namespace: the fakeroot(1) version shipping
with (at least) Fedora 36 assumes "nested" operation as it sees that
the UID is 0, and claims it's not supported.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
dhclient might be in /usr/sbin on recent versions of Fedora, and
mbuto just adds it to the same location as it was on the host:
just call dhclient instead of /sbin/dhclient.
This also applies for dhclient-script: given that we create the file
on boot, pass its explicit location with -sf.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Targets running static checkers (cppcheck and clang-tidy) need
seccomp.h, but the latter is not included in HEADERS. Add it.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
If we append CFLAGS to the ones passed via command line (if any),
-D options we append will override -D options passed on command line
(if any).
For example, OpenSUSE build flags include -D_FORTIFY_SOURCE=3, and we
want to have -D_FORTIFY_SOURCE=2, if and only if not overridden. The
current behaviour implies we redefine _FORTIFY_SOURCE as 2, though.
Instead of appending CFLAGS, prepend them by adding all the default
build flags to another variable, a simply expanded one (defined with
:=), named FLAGS, and pass that *before* CFLAGS in targets, so that
defines from command line can override default flags.
Reported-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Dario Faggioli <dfaggioli@suse.com>
We use the [ "$x" -eq "$x" ] syntax to check if $x is a number. The
behaviour is clearly implied by POSIX, but some shells might actually
report the (intended) error, and dash floods script.log with
"Illegal number" error messages. Hide them.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Because UDP is connectionless we don't have an in-built end-of-stream
signal for our connectivity tests. We work around this by explicitly
adding an end marker to our sample data and killing the listening end once
it is seen.
However, socat has some built-in options - null-eof and shut-null - which
can be used to signal the end of stream with a zero-length UDP packet.
Use these to simplify how the UDP tests are implemented.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
udp_tap_handler() currently skips outbound packets if they have a payload
length of zero. This is not correct, since in a datagram protocol zero
length packets still have meaning.
Adjust this to correctly forward the zero-length packets by using a msghdr
with msg_iovlen == 0.
Bugzilla: https://bugs.passt.top/show_bug.cgi?id=19
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In udp_tap_handler() the array of msghdr structures, mm[], is initialized
to zero. Since UIO_MAXIOV is 1024, this can be quite a large zero, which
is expensive if we only end up using a few of its entries. It also makes
it less obvious how we're setting all the control fields at the point we
actually invoke sendmmsg().
Rather than pre-initializing it, just initialize each element as we use it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The tests generate a performance report in $BASEPATH/perf.js and
hooks/pre-push copies it to the website. To avoid cluttering the working
directory, instead put perf.js in $LOGDIR/web, since it's a test output
artefact. Update hooks/pre-push to copy from its new location.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The asciinema video handling creates a number of temporary files (.uncat,
.start, .stop) which currently go into the source tree. Put them in the
temporary state directory to avoid clutter.
The final processed output is now placed into test_logs/web/ along with the
corresponding .js file with links, since they're essentially test
artefacts. hooks/pre-push is updated to look for those files in the new
location when updating the web site.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Avoiding putting them in bare /tmp means they will be automatically
cleaned up with everything else.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently they go in the passt source tree with a fixed names, which means
their presence can mess with subsequent test runs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The capture files are more or less a different form of log output from the
tests, so place them in $LOGDIR.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
