passt/passt.c
David Gibson e0647ad80c udp: Handle "spliced" datagrams with per-flow sockets
When forwarding a datagram to a socket, we need to find a socket with a
suitable local address to send it.  Currently we keep track of such sockets
in an array indexed by local port, but this can't properly handle cases
where we have multiple local addresses in active use.

For "spliced" (socket to socket) cases, improve this by instead opening
a socket specifically for the target side of the flow.  We connect() as
well as bind()ing that socket, so that it will only receive the flow's
reply packets, not anything else.  We direct datagrams sent via that socket
using the addresses from the flow table, effectively replacing bespoke
addressing logic with the unified logic in fwd.c

When we create the flow, we also take a duplicate of the originating
socket, and use that to deliver reply datagrams back to the origin, again
using addresses from the flow table entry.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2024-07-19 18:33:42 +02:00

368 lines
9.5 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/* PASST - Plug A Simple Socket Transport
* for qemu/UNIX domain socket mode
*
* PASTA - Pack A Subtle Tap Abstraction
* for network namespace/tap device mode
*
* passt.c - Daemon implementation
*
* Copyright (c) 2020-2021 Red Hat GmbH
* Author: Stefano Brivio <sbrivio@redhat.com>
*
* Grab Ethernet frames from AF_UNIX socket (in "passt" mode) or tap device (in
* "pasta" mode), build SOCK_DGRAM/SOCK_STREAM sockets for each 5-tuple from
* TCP, UDP packets, perform connection tracking and forward them. Forward
* packets received on sockets back to the UNIX domain socket (typically, a
* socket virtio_net file descriptor from qemu) or to the tap device (typically,
* created in a separate network namespace).
*/
#include <sys/epoll.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <sys/resource.h>
#include <stdbool.h>
#include <stdlib.h>
#include <unistd.h>
#include <netdb.h>
#include <signal.h>
#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <time.h>
#include <syslog.h>
#include <sys/prctl.h>
#include <netinet/if_ether.h>
#include <libgen.h>
#ifdef HAS_GETRANDOM
#include <sys/random.h>
#endif
#include "util.h"
#include "passt.h"
#include "dhcp.h"
#include "dhcpv6.h"
#include "isolation.h"
#include "pcap.h"
#include "tap.h"
#include "conf.h"
#include "pasta.h"
#include "arch.h"
#include "log.h"
#include "tcp_splice.h"
#define EPOLL_EVENTS 8
#define TIMER_INTERVAL__ MIN(TCP_TIMER_INTERVAL, UDP_TIMER_INTERVAL)
#define TIMER_INTERVAL_ MIN(TIMER_INTERVAL__, ICMP_TIMER_INTERVAL)
#define TIMER_INTERVAL MIN(TIMER_INTERVAL_, FLOW_TIMER_INTERVAL)
char pkt_buf[PKT_BUF_BYTES] __attribute__ ((aligned(PAGE_SIZE)));
char *epoll_type_str[] = {
[EPOLL_TYPE_TCP] = "connected TCP socket",
[EPOLL_TYPE_TCP_SPLICE] = "connected spliced TCP socket",
[EPOLL_TYPE_TCP_LISTEN] = "listening TCP socket",
[EPOLL_TYPE_TCP_TIMER] = "TCP timer",
[EPOLL_TYPE_UDP] = "UDP socket",
[EPOLL_TYPE_UDP_REPLY] = "UDP reply socket",
[EPOLL_TYPE_PING] = "ICMP/ICMPv6 ping socket",
[EPOLL_TYPE_NSQUIT_INOTIFY] = "namespace inotify watch",
[EPOLL_TYPE_NSQUIT_TIMER] = "namespace timer watch",
[EPOLL_TYPE_TAP_PASTA] = "/dev/net/tun device",
[EPOLL_TYPE_TAP_PASST] = "connected qemu socket",
[EPOLL_TYPE_TAP_LISTEN] = "listening qemu socket",
};
static_assert(ARRAY_SIZE(epoll_type_str) == EPOLL_NUM_TYPES,
"epoll_type_str[] doesn't match enum epoll_type");
/**
* post_handler() - Run periodic and deferred tasks for L4 protocol handlers
* @c: Execution context
* @now: Current timestamp
*/
static void post_handler(struct ctx *c, const struct timespec *now)
{
#define CALL_PROTO_HANDLER(lc, uc) \
do { \
extern void \
lc ## _defer_handler (struct ctx *c) \
__attribute__ ((weak)); \
\
if (!c->no_ ## lc) { \
if (lc ## _defer_handler) \
lc ## _defer_handler(c); \
\
if (timespec_diff_ms((now), &c->lc.timer_run) \
>= uc ## _TIMER_INTERVAL) { \
lc ## _timer(c, now); \
c->lc.timer_run = *now; \
} \
} \
} while (0)
/* NOLINTNEXTLINE(bugprone-branch-clone): intervals can be the same */
CALL_PROTO_HANDLER(tcp, TCP);
/* NOLINTNEXTLINE(bugprone-branch-clone): intervals can be the same */
CALL_PROTO_HANDLER(udp, UDP);
flow_defer_handler(c, now);
#undef CALL_PROTO_HANDLER
}
/**
* secret_init() - Create secret value for SipHash calculations
* @c: Execution context
*/
static void secret_init(struct ctx *c)
{
#ifndef HAS_GETRANDOM
int dev_random = open("/dev/random", O_RDONLY);
unsigned int random_read = 0;
while (dev_random && random_read < sizeof(c->hash_secret)) {
int ret = read(dev_random,
(uint8_t *)&c->hash_secret + random_read,
sizeof(c->hash_secret) - random_read);
if (ret == -1 && errno == EINTR)
continue;
if (ret <= 0)
break;
random_read += ret;
}
if (dev_random >= 0)
close(dev_random);
if (random_read < sizeof(c->hash_secret))
#else
if (getrandom(&c->hash_secret, sizeof(c->hash_secret),
GRND_RANDOM) < 0)
#endif /* !HAS_GETRANDOM */
die_perror("Failed to get random bytes for hash table and TCP");
}
/**
* timer_init() - Set initial timestamp for timer runs to current time
* @c: Execution context
* @now: Current timestamp
*/
static void timer_init(struct ctx *c, const struct timespec *now)
{
c->tcp.timer_run = c->udp.timer_run = c->icmp.timer_run = *now;
}
/**
* proto_update_l2_buf() - Update scatter-gather L2 buffers in protocol handlers
* @eth_d: Ethernet destination address, NULL if unchanged
* @eth_s: Ethernet source address, NULL if unchanged
*/
void proto_update_l2_buf(const unsigned char *eth_d, const unsigned char *eth_s)
{
tcp_update_l2_buf(eth_d, eth_s);
udp_update_l2_buf(eth_d, eth_s);
}
/**
* exit_handler() - Signal handler for SIGQUIT and SIGTERM
* @unused: Unused, handler deals with SIGQUIT and SIGTERM only
*
* TODO: After unsharing the PID namespace and forking, SIG_DFL for SIGTERM and
* SIGQUIT unexpectedly doesn't cause the process to terminate, figure out why.
*
* #syscalls exit_group
*/
void exit_handler(int signal)
{
(void)signal;
exit(EXIT_SUCCESS);
}
/**
* main() - Entry point and main loop
* @argc: Argument count
* @argv: Options, plus optional target PID for pasta mode
*
* Return: non-zero on failure
*
* #syscalls read write writev
* #syscalls socket bind connect getsockopt setsockopt s390x:socketcall close
* #syscalls recvfrom sendto shutdown
* #syscalls arm:recv ppc64le:recv arm:send ppc64le:send
* #syscalls accept4|accept listen epoll_ctl epoll_wait|epoll_pwait epoll_pwait
* #syscalls clock_gettime arm:clock_gettime64
*/
int main(int argc, char **argv)
{
struct epoll_event events[EPOLL_EVENTS];
int nfds, i, devnull_fd = -1;
char argv0[PATH_MAX], *name;
struct ctx c = { 0 };
struct rlimit limit;
struct timespec now;
struct sigaction sa;
arch_avx2_exec(argv);
isolate_initial();
c.pasta_netns_fd = c.fd_tap = c.pidfile_fd = -1;
sigemptyset(&sa.sa_mask);
sa.sa_flags = 0;
sa.sa_handler = exit_handler;
sigaction(SIGTERM, &sa, NULL);
sigaction(SIGQUIT, &sa, NULL);
if (argc < 1)
exit(EXIT_FAILURE);
strncpy(argv0, argv[0], PATH_MAX - 1);
name = basename(argv0);
if (strstr(name, "pasta")) {
sa.sa_handler = pasta_child_handler;
if (sigaction(SIGCHLD, &sa, NULL))
die_perror("Couldn't install signal handlers");
if (signal(SIGPIPE, SIG_IGN) == SIG_ERR)
die_perror("Couldn't set disposition for SIGPIPE");
c.mode = MODE_PASTA;
} else if (strstr(name, "passt")) {
c.mode = MODE_PASST;
} else {
exit(EXIT_FAILURE);
}
madvise(pkt_buf, TAP_BUF_BYTES, MADV_HUGEPAGE);
c.epollfd = epoll_create1(EPOLL_CLOEXEC);
if (c.epollfd == -1)
die_perror("Failed to create epoll file descriptor");
if (getrlimit(RLIMIT_NOFILE, &limit))
die_perror("Failed to get maximum value of open files limit");
c.nofile = limit.rlim_cur = limit.rlim_max;
if (setrlimit(RLIMIT_NOFILE, &limit))
die_perror("Failed to set current limit for open files");
sock_probe_mem(&c);
conf(&c, argc, argv);
trace_init(c.trace);
pasta_netns_quit_init(&c);
tap_sock_init(&c);
secret_init(&c);
clock_gettime(CLOCK_MONOTONIC, &now);
flow_init();
if ((!c.no_udp && udp_init(&c)) || (!c.no_tcp && tcp_init(&c)))
exit(EXIT_FAILURE);
proto_update_l2_buf(c.mac_guest, c.mac);
if (c.ifi4 && !c.no_dhcp)
dhcp_init();
if (c.ifi6 && !c.no_dhcpv6)
dhcpv6_init(&c);
pcap_init(&c);
if (!c.foreground) {
if ((devnull_fd = open("/dev/null", O_RDWR | O_CLOEXEC)) < 0)
die_perror("Failed to open /dev/null");
}
if (isolate_prefork(&c))
die("Failed to sandbox process, exiting");
if (!c.foreground)
__daemon(c.pidfile_fd, devnull_fd);
else
pidfile_write(c.pidfile_fd, getpid());
log_runtime = true;
if (pasta_child_pid)
kill(pasta_child_pid, SIGUSR1);
isolate_postfork(&c);
timer_init(&c, &now);
loop:
/* NOLINTNEXTLINE(bugprone-branch-clone): intervals can be the same */
/* cppcheck-suppress [duplicateValueTernary, unmatchedSuppression] */
nfds = epoll_wait(c.epollfd, events, EPOLL_EVENTS, TIMER_INTERVAL);
if (nfds == -1 && errno != EINTR)
die_perror("epoll_wait() failed in main loop");
clock_gettime(CLOCK_MONOTONIC, &now);
for (i = 0; i < nfds; i++) {
union epoll_ref ref = *((union epoll_ref *)&events[i].data.u64);
uint32_t eventmask = events[i].events;
trace("%s: epoll event on %s %i (events: 0x%08x)",
c.mode == MODE_PASTA ? "pasta" : "passt",
EPOLL_TYPE_STR(ref.type), ref.fd, eventmask);
switch (ref.type) {
case EPOLL_TYPE_TAP_PASTA:
tap_handler_pasta(&c, eventmask, &now);
break;
case EPOLL_TYPE_TAP_PASST:
tap_handler_passt(&c, eventmask, &now);
break;
case EPOLL_TYPE_TAP_LISTEN:
tap_listen_handler(&c, eventmask);
break;
case EPOLL_TYPE_NSQUIT_INOTIFY:
pasta_netns_quit_inotify_handler(&c, ref.fd);
break;
case EPOLL_TYPE_NSQUIT_TIMER:
pasta_netns_quit_timer_handler(&c, ref);
break;
case EPOLL_TYPE_TCP:
tcp_sock_handler(&c, ref, eventmask);
break;
case EPOLL_TYPE_TCP_SPLICE:
tcp_splice_sock_handler(&c, ref, eventmask);
break;
case EPOLL_TYPE_TCP_LISTEN:
tcp_listen_handler(&c, ref, &now);
break;
case EPOLL_TYPE_TCP_TIMER:
tcp_timer_handler(&c, ref);
break;
case EPOLL_TYPE_UDP:
udp_buf_sock_handler(&c, ref, eventmask, &now);
break;
case EPOLL_TYPE_UDP_REPLY:
udp_reply_sock_handler(&c, ref, eventmask, &now);
break;
case EPOLL_TYPE_PING:
icmp_sock_handler(&c, ref);
break;
default:
/* Can't happen */
ASSERT(0);
}
}
post_handler(&c, &now);
goto loop;
}