passt/conf.c

1871 lines
50 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/* PASST - Plug A Simple Socket Transport
* for qemu/UNIX domain socket mode
*
* PASTA - Pack A Subtle Tap Abstraction
* for network namespace/tap device mode
*
* conf.c - Configuration settings and option parsing
*
* Copyright (c) 2020-2021 Red Hat GmbH
* Author: Stefano Brivio <sbrivio@redhat.com>
*/
#include <arpa/inet.h>
#include <errno.h>
#include <fcntl.h>
#include <getopt.h>
#include <string.h>
#include <sched.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <limits.h>
#include <grp.h>
#include <pwd.h>
#include <unistd.h>
#include <signal.h>
#include <stdlib.h>
#include <stdint.h>
#include <stdio.h>
#include <stdbool.h>
#include <syslog.h>
#include <time.h>
#include <netinet/in.h>
#include <netinet/if_ether.h>
#include "util.h"
#include "ip.h"
#include "passt.h"
#include "netlink.h"
#include "tap.h"
#include "udp.h"
#include "tcp.h"
#include "pasta.h"
#include "lineread.h"
#include "isolation.h"
#include "log.h"
#define NETNS_RUN_DIR "/run/netns"
/**
* next_chunk - Return the next piece of a string delimited by a character
* @s: String to search
* @c: Delimiter character
*
* Return: If another @c is found in @s, returns a pointer to the
* character *after* the delimiter, if no further @c is in @s,
* return NULL
*/
static char *next_chunk(const char *s, char c)
{
char *sep = strchr(s, c);
return sep ? sep + 1 : NULL;
}
/**
* port_range - Represents a non-empty range of ports
* @first: First port number in the range
* @last: Last port number in the range (inclusive)
*
* Invariant: @last >= @first
*/
struct port_range {
in_port_t first, last;
};
/**
* parse_port_range() - Parse a range of port numbers '<first>[-<last>]'
* @s: String to parse
* @endptr: Update to the character after the parsed range (similar to
* strtol() etc.)
* @range: Update with the parsed values on success
*
* Return: -EINVAL on parsing error, -ERANGE on out of range port
* numbers, 0 on success
*/
static int parse_port_range(const char *s, char **endptr,
struct port_range *range)
{
unsigned long first, last;
last = first = strtoul(s, endptr, 10);
if (*endptr == s) /* Parsed nothing */
return -EINVAL;
if (**endptr == '-') { /* we have a last value too */
const char *lasts = *endptr + 1;
last = strtoul(lasts, endptr, 10);
if (*endptr == lasts) /* Parsed nothing */
return -EINVAL;
}
if ((last < first) || (last >= NUM_PORTS))
return -ERANGE;
range->first = first;
range->last = last;
return 0;
}
/**
* conf_ports() - Parse port configuration options, initialise UDP/TCP sockets
* @c: Execution context
* @optname: Short option name, t, T, u, or U
* @optarg: Option argument (port specification)
* @fwd: Pointer to @fwd_ports to be updated
*/
static void conf_ports(const struct ctx *c, char optname, const char *optarg,
struct fwd_ports *fwd)
{
union inany_addr addr_buf = inany_any6, *addr = &addr_buf;
char buf[BUFSIZ], *spec, *ifname = NULL, *p;
bool exclude_only = true, bound_one = false;
uint8_t exclude[PORT_BITMAP_SIZE] = { 0 };
conf, passt.1: Exit if we can't bind a forwarded port, except for -[tu] all ...or similar, that is, if only excluded ranges are given (implying we'll forward any other available port). In that case, we'll usually forward large sets of ports, and it might be inconvenient for the user to skip excluding single ports that are already taken. The existing behaviour, that is, exiting only if we fail to bind all the ports for one given forwarding option, turns out to be problematic for several aspects raised by Paul: - Podman merges ranges anyway, so we might fail to bind all the ports from a specific range given by the user, but we'll not fail anyway because Podman merges it with another one where we succeed to bind at least one port. At the same time, there should be no semantic difference between multiple ranges given by a single option and multiple ranges given as multiple options: it's unexpected and not documented - the user might actually rely on a given port to be forwarded to a given container or a virtual machine, and if connections are forwarded to an unrelated process, this might raise security concerns - given that we can try and fail to bind multiple ports before exiting (in case we can't bind any), we don't have a specific error code we can return to the user, so we don't give the user helpful indication as to why we couldn't bind ports. Exit as soon as we fail to create or bind a socket for a given forwarded port, and report the actual error. Keep the current behaviour, however, in case the user wants to forward all the (available) ports for a given protocol, or all the ports with excluded ranges only. There, it's more reasonable that the user is expecting partial failures, and it's probably convenient that we continue with the ports we could forward. Update the manual page to reflect the new behaviour, and the old behaviour too in the cases where we keep it. Suggested-by: Paul Holzinger <pholzing@redhat.com> Link: https://github.com/containers/podman/pull/21563#issuecomment-1937024642 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Tested-by: Paul Holzinger <pholzing@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2024-02-14 02:26:24 +01:00
unsigned i;
int ret;
if (!strcmp(optarg, "none")) {
if (fwd->mode)
goto mode_conflict;
fwd->mode = FWD_NONE;
return;
}
if ((optname == 't' || optname == 'T') && c->no_tcp)
die("TCP port forwarding requested but TCP is disabled");
if ((optname == 'u' || optname == 'U') && c->no_udp)
die("UDP port forwarding requested but UDP is disabled");
if (!strcmp(optarg, "auto")) {
if (fwd->mode)
goto mode_conflict;
if (c->mode != MODE_PASTA)
die("'auto' port forwarding is only allowed for pasta");
fwd->mode = FWD_AUTO;
return;
}
if (!strcmp(optarg, "all")) {
if (fwd->mode)
goto mode_conflict;
if (c->mode == MODE_PASTA)
die("'all' port forwarding is only allowed for passt");
fwd->mode = FWD_ALL;
/* Skip port 0. It has special meaning for many socket APIs, so
* trying to bind it is not really safe.
*/
for (i = 1; i < NUM_PORTS; i++) {
if (fwd_port_is_ephemeral(i))
continue;
bitmap_set(fwd->map, i);
if (optname == 't') {
ret = tcp_sock_init(c, NULL, NULL, i);
if (ret == -ENFILE || ret == -EMFILE)
goto enfile;
if (!ret)
bound_one = true;
} else if (optname == 'u') {
ret = udp_sock_init(c, 0, NULL, NULL, i);
if (ret == -ENFILE || ret == -EMFILE)
goto enfile;
if (!ret)
bound_one = true;
}
}
if (!bound_one)
conf, passt.1: Exit if we can't bind a forwarded port, except for -[tu] all ...or similar, that is, if only excluded ranges are given (implying we'll forward any other available port). In that case, we'll usually forward large sets of ports, and it might be inconvenient for the user to skip excluding single ports that are already taken. The existing behaviour, that is, exiting only if we fail to bind all the ports for one given forwarding option, turns out to be problematic for several aspects raised by Paul: - Podman merges ranges anyway, so we might fail to bind all the ports from a specific range given by the user, but we'll not fail anyway because Podman merges it with another one where we succeed to bind at least one port. At the same time, there should be no semantic difference between multiple ranges given by a single option and multiple ranges given as multiple options: it's unexpected and not documented - the user might actually rely on a given port to be forwarded to a given container or a virtual machine, and if connections are forwarded to an unrelated process, this might raise security concerns - given that we can try and fail to bind multiple ports before exiting (in case we can't bind any), we don't have a specific error code we can return to the user, so we don't give the user helpful indication as to why we couldn't bind ports. Exit as soon as we fail to create or bind a socket for a given forwarded port, and report the actual error. Keep the current behaviour, however, in case the user wants to forward all the (available) ports for a given protocol, or all the ports with excluded ranges only. There, it's more reasonable that the user is expecting partial failures, and it's probably convenient that we continue with the ports we could forward. Update the manual page to reflect the new behaviour, and the old behaviour too in the cases where we keep it. Suggested-by: Paul Holzinger <pholzing@redhat.com> Link: https://github.com/containers/podman/pull/21563#issuecomment-1937024642 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Tested-by: Paul Holzinger <pholzing@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2024-02-14 02:26:24 +01:00
goto bind_all_fail;
return;
}
if (fwd->mode > FWD_SPEC)
die("Specific ports cannot be specified together with all/none/auto");
fwd->mode = FWD_SPEC;
strncpy(buf, optarg, sizeof(buf) - 1);
if ((spec = strchr(buf, '/'))) {
*spec = 0;
spec++;
if (optname != 't' && optname != 'u')
goto bad;
if ((ifname = strchr(buf, '%'))) {
*ifname = 0;
ifname++;
/* spec is already advanced one past the '/',
* so the length of the given ifname is:
* (spec - ifname - 1)
*/
if (spec - ifname - 1 >= IFNAMSIZ)
goto bad;
}
if (ifname == buf + 1) { /* Interface without address */
addr = NULL;
} else {
p = buf;
/* Allow square brackets for IPv4 too for convenience */
if (*p == '[' && p[strlen(p) - 1] == ']') {
p[strlen(p) - 1] = '\0';
p++;
}
if (!inany_pton(p, addr))
goto bad;
}
} else {
spec = buf;
addr = NULL;
}
/* Mark all exclusions first, they might be given after base ranges */
p = spec;
do {
struct port_range xrange;
if (*p != '~') {
/* Not an exclude range, parse later */
exclude_only = false;
continue;
}
p++;
if (parse_port_range(p, &p, &xrange))
goto bad;
if ((*p != '\0') && (*p != ',')) /* Garbage after the range */
goto bad;
for (i = xrange.first; i <= xrange.last; i++) {
if (bitmap_isset(exclude, i))
die("Overlapping excluded ranges %s", optarg);
bitmap_set(exclude, i);
}
} while ((p = next_chunk(p, ',')));
if (exclude_only) {
/* Skip port 0. It has special meaning for many socket APIs, so
* trying to bind it is not really safe.
*/
for (i = 1; i < NUM_PORTS; i++) {
if (fwd_port_is_ephemeral(i) ||
bitmap_isset(exclude, i))
continue;
bitmap_set(fwd->map, i);
if (optname == 't') {
ret = tcp_sock_init(c, addr, ifname, i);
if (ret == -ENFILE || ret == -EMFILE)
goto enfile;
if (!ret)
bound_one = true;
} else if (optname == 'u') {
ret = udp_sock_init(c, 0, addr, ifname, i);
if (ret == -ENFILE || ret == -EMFILE)
goto enfile;
if (!ret)
bound_one = true;
} else {
/* No way to check in advance for -T and -U */
bound_one = true;
}
}
if (!bound_one)
conf, passt.1: Exit if we can't bind a forwarded port, except for -[tu] all ...or similar, that is, if only excluded ranges are given (implying we'll forward any other available port). In that case, we'll usually forward large sets of ports, and it might be inconvenient for the user to skip excluding single ports that are already taken. The existing behaviour, that is, exiting only if we fail to bind all the ports for one given forwarding option, turns out to be problematic for several aspects raised by Paul: - Podman merges ranges anyway, so we might fail to bind all the ports from a specific range given by the user, but we'll not fail anyway because Podman merges it with another one where we succeed to bind at least one port. At the same time, there should be no semantic difference between multiple ranges given by a single option and multiple ranges given as multiple options: it's unexpected and not documented - the user might actually rely on a given port to be forwarded to a given container or a virtual machine, and if connections are forwarded to an unrelated process, this might raise security concerns - given that we can try and fail to bind multiple ports before exiting (in case we can't bind any), we don't have a specific error code we can return to the user, so we don't give the user helpful indication as to why we couldn't bind ports. Exit as soon as we fail to create or bind a socket for a given forwarded port, and report the actual error. Keep the current behaviour, however, in case the user wants to forward all the (available) ports for a given protocol, or all the ports with excluded ranges only. There, it's more reasonable that the user is expecting partial failures, and it's probably convenient that we continue with the ports we could forward. Update the manual page to reflect the new behaviour, and the old behaviour too in the cases where we keep it. Suggested-by: Paul Holzinger <pholzing@redhat.com> Link: https://github.com/containers/podman/pull/21563#issuecomment-1937024642 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Tested-by: Paul Holzinger <pholzing@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2024-02-14 02:26:24 +01:00
goto bind_all_fail;
return;
}
/* Now process base ranges, skipping exclusions */
p = spec;
do {
struct port_range orig_range, mapped_range;
if (*p == '~')
/* Exclude range, already parsed */
continue;
if (parse_port_range(p, &p, &orig_range))
goto bad;
if (*p == ':') { /* There's a range to map to as well */
if (parse_port_range(p + 1, &p, &mapped_range))
goto bad;
if ((mapped_range.last - mapped_range.first) !=
(orig_range.last - orig_range.first))
goto bad;
} else {
mapped_range = orig_range;
}
if ((*p != '\0') && (*p != ',')) /* Garbage after the ranges */
goto bad;
for (i = orig_range.first; i <= orig_range.last; i++) {
if (bitmap_isset(fwd->map, i))
warn(
"Altering mapping of already mapped port number: %s", optarg);
if (bitmap_isset(exclude, i))
continue;
bitmap_set(fwd->map, i);
fwd->delta[i] = mapped_range.first - orig_range.first;
conf, passt.1: Exit if we can't bind a forwarded port, except for -[tu] all ...or similar, that is, if only excluded ranges are given (implying we'll forward any other available port). In that case, we'll usually forward large sets of ports, and it might be inconvenient for the user to skip excluding single ports that are already taken. The existing behaviour, that is, exiting only if we fail to bind all the ports for one given forwarding option, turns out to be problematic for several aspects raised by Paul: - Podman merges ranges anyway, so we might fail to bind all the ports from a specific range given by the user, but we'll not fail anyway because Podman merges it with another one where we succeed to bind at least one port. At the same time, there should be no semantic difference between multiple ranges given by a single option and multiple ranges given as multiple options: it's unexpected and not documented - the user might actually rely on a given port to be forwarded to a given container or a virtual machine, and if connections are forwarded to an unrelated process, this might raise security concerns - given that we can try and fail to bind multiple ports before exiting (in case we can't bind any), we don't have a specific error code we can return to the user, so we don't give the user helpful indication as to why we couldn't bind ports. Exit as soon as we fail to create or bind a socket for a given forwarded port, and report the actual error. Keep the current behaviour, however, in case the user wants to forward all the (available) ports for a given protocol, or all the ports with excluded ranges only. There, it's more reasonable that the user is expecting partial failures, and it's probably convenient that we continue with the ports we could forward. Update the manual page to reflect the new behaviour, and the old behaviour too in the cases where we keep it. Suggested-by: Paul Holzinger <pholzing@redhat.com> Link: https://github.com/containers/podman/pull/21563#issuecomment-1937024642 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Tested-by: Paul Holzinger <pholzing@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2024-02-14 02:26:24 +01:00
ret = 0;
if (optname == 't')
ret = tcp_sock_init(c, addr, ifname, i);
conf, passt.1: Exit if we can't bind a forwarded port, except for -[tu] all ...or similar, that is, if only excluded ranges are given (implying we'll forward any other available port). In that case, we'll usually forward large sets of ports, and it might be inconvenient for the user to skip excluding single ports that are already taken. The existing behaviour, that is, exiting only if we fail to bind all the ports for one given forwarding option, turns out to be problematic for several aspects raised by Paul: - Podman merges ranges anyway, so we might fail to bind all the ports from a specific range given by the user, but we'll not fail anyway because Podman merges it with another one where we succeed to bind at least one port. At the same time, there should be no semantic difference between multiple ranges given by a single option and multiple ranges given as multiple options: it's unexpected and not documented - the user might actually rely on a given port to be forwarded to a given container or a virtual machine, and if connections are forwarded to an unrelated process, this might raise security concerns - given that we can try and fail to bind multiple ports before exiting (in case we can't bind any), we don't have a specific error code we can return to the user, so we don't give the user helpful indication as to why we couldn't bind ports. Exit as soon as we fail to create or bind a socket for a given forwarded port, and report the actual error. Keep the current behaviour, however, in case the user wants to forward all the (available) ports for a given protocol, or all the ports with excluded ranges only. There, it's more reasonable that the user is expecting partial failures, and it's probably convenient that we continue with the ports we could forward. Update the manual page to reflect the new behaviour, and the old behaviour too in the cases where we keep it. Suggested-by: Paul Holzinger <pholzing@redhat.com> Link: https://github.com/containers/podman/pull/21563#issuecomment-1937024642 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Tested-by: Paul Holzinger <pholzing@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2024-02-14 02:26:24 +01:00
else if (optname == 'u')
ret = udp_sock_init(c, 0, addr, ifname, i);
conf, passt.1: Exit if we can't bind a forwarded port, except for -[tu] all ...or similar, that is, if only excluded ranges are given (implying we'll forward any other available port). In that case, we'll usually forward large sets of ports, and it might be inconvenient for the user to skip excluding single ports that are already taken. The existing behaviour, that is, exiting only if we fail to bind all the ports for one given forwarding option, turns out to be problematic for several aspects raised by Paul: - Podman merges ranges anyway, so we might fail to bind all the ports from a specific range given by the user, but we'll not fail anyway because Podman merges it with another one where we succeed to bind at least one port. At the same time, there should be no semantic difference between multiple ranges given by a single option and multiple ranges given as multiple options: it's unexpected and not documented - the user might actually rely on a given port to be forwarded to a given container or a virtual machine, and if connections are forwarded to an unrelated process, this might raise security concerns - given that we can try and fail to bind multiple ports before exiting (in case we can't bind any), we don't have a specific error code we can return to the user, so we don't give the user helpful indication as to why we couldn't bind ports. Exit as soon as we fail to create or bind a socket for a given forwarded port, and report the actual error. Keep the current behaviour, however, in case the user wants to forward all the (available) ports for a given protocol, or all the ports with excluded ranges only. There, it's more reasonable that the user is expecting partial failures, and it's probably convenient that we continue with the ports we could forward. Update the manual page to reflect the new behaviour, and the old behaviour too in the cases where we keep it. Suggested-by: Paul Holzinger <pholzing@redhat.com> Link: https://github.com/containers/podman/pull/21563#issuecomment-1937024642 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Tested-by: Paul Holzinger <pholzing@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2024-02-14 02:26:24 +01:00
if (ret)
goto bind_fail;
}
} while ((p = next_chunk(p, ',')));
return;
enfile:
die("Can't open enough sockets for port specifier: %s", optarg);
bad:
die("Invalid port specifier %s", optarg);
mode_conflict:
die("Port forwarding mode '%s' conflicts with previous mode", optarg);
bind_fail:
conf, passt.1: Exit if we can't bind a forwarded port, except for -[tu] all ...or similar, that is, if only excluded ranges are given (implying we'll forward any other available port). In that case, we'll usually forward large sets of ports, and it might be inconvenient for the user to skip excluding single ports that are already taken. The existing behaviour, that is, exiting only if we fail to bind all the ports for one given forwarding option, turns out to be problematic for several aspects raised by Paul: - Podman merges ranges anyway, so we might fail to bind all the ports from a specific range given by the user, but we'll not fail anyway because Podman merges it with another one where we succeed to bind at least one port. At the same time, there should be no semantic difference between multiple ranges given by a single option and multiple ranges given as multiple options: it's unexpected and not documented - the user might actually rely on a given port to be forwarded to a given container or a virtual machine, and if connections are forwarded to an unrelated process, this might raise security concerns - given that we can try and fail to bind multiple ports before exiting (in case we can't bind any), we don't have a specific error code we can return to the user, so we don't give the user helpful indication as to why we couldn't bind ports. Exit as soon as we fail to create or bind a socket for a given forwarded port, and report the actual error. Keep the current behaviour, however, in case the user wants to forward all the (available) ports for a given protocol, or all the ports with excluded ranges only. There, it's more reasonable that the user is expecting partial failures, and it's probably convenient that we continue with the ports we could forward. Update the manual page to reflect the new behaviour, and the old behaviour too in the cases where we keep it. Suggested-by: Paul Holzinger <pholzing@redhat.com> Link: https://github.com/containers/podman/pull/21563#issuecomment-1937024642 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Tested-by: Paul Holzinger <pholzing@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2024-02-14 02:26:24 +01:00
die("Failed to bind port %u (%s) for option '-%c %s', exiting",
i, strerror(-ret), optname, optarg);
bind_all_fail:
die("Failed to bind any port for '-%c %s', exiting", optname, optarg);
}
/**
* add_dns4() - Possibly add the IPv4 address of a DNS resolver to configuration
* @c: Execution context
* @addr: Guest nameserver IPv4 address
* @idx: Index of free entry in array of IPv4 resolvers
*
* Return: Number of entries added (0 or 1)
*/
static unsigned add_dns4(struct ctx *c, const struct in_addr *addr,
unsigned idx)
{
if (idx >= ARRAY_SIZE(c->ip4.dns))
return 0;
c->ip4.dns[idx] = *addr;
return 1;
}
/**
* add_dns6() - Possibly add the IPv6 address of a DNS resolver to configuration
* @c: Execution context
* @addr: Guest nameserver IPv6 address
* @idx: Index of free entry in array of IPv6 resolvers
*
* Return: Number of entries added (0 or 1)
*/
static unsigned add_dns6(struct ctx *c, const struct in6_addr *addr,
unsigned idx)
{
if (idx >= ARRAY_SIZE(c->ip6.dns))
return 0;
c->ip6.dns[idx] = *addr;
return 1;
}
/**
* add_dns_resolv() - Possibly add ns from host resolv.conf to configuration
* @c: Execution context
* @nameserver: Nameserver address string from /etc/resolv.conf
* @idx4: Pointer to index of current entry in array of IPv4 resolvers
* @idx6: Pointer to index of current entry in array of IPv6 resolvers
*
* @idx4 or @idx6 may be NULL, in which case resolvers of the corresponding type
* are ignored.
*/
static void add_dns_resolv(struct ctx *c, const char *nameserver,
unsigned *idx4, unsigned *idx6)
{
struct in6_addr ns6;
struct in_addr ns4;
if (idx4 && inet_pton(AF_INET, nameserver, &ns4)) {
if (IN4_IS_ADDR_UNSPECIFIED(&c->ip4.dns_host))
c->ip4.dns_host = ns4;
/* Guest or container can only access local addresses via
* redirect
*/
if (IN4_IS_ADDR_LOOPBACK(&ns4)) {
if (IN4_IS_ADDR_UNSPECIFIED(&c->ip4.map_host_loopback))
return;
ns4 = c->ip4.map_host_loopback;
if (IN4_IS_ADDR_UNSPECIFIED(&c->ip4.dns_match))
c->ip4.dns_match = c->ip4.map_host_loopback;
}
*idx4 += add_dns4(c, &ns4, *idx4);
}
if (idx6 && inet_pton(AF_INET6, nameserver, &ns6)) {
if (IN6_IS_ADDR_UNSPECIFIED(&c->ip6.dns_host))
c->ip6.dns_host = ns6;
/* Guest or container can only access local addresses via
* redirect
*/
if (IN6_IS_ADDR_LOOPBACK(&ns6)) {
if (IN6_IS_ADDR_UNSPECIFIED(&c->ip6.map_host_loopback))
return;
ns6 = c->ip6.map_host_loopback;
if (IN6_IS_ADDR_UNSPECIFIED(&c->ip6.dns_match))
c->ip6.dns_match = c->ip6.map_host_loopback;
}
*idx6 += add_dns6(c, &ns6, *idx6);
}
}
/**
* get_dns() - Get nameserver addresses from local /etc/resolv.conf
* @c: Execution context
*/
static void get_dns(struct ctx *c)
{
int dns4_set, dns6_set, dnss_set, dns_set, fd;
unsigned dns4_idx = 0, dns6_idx = 0;
struct fqdn *s = c->dns_search;
struct lineread resolvconf;
ssize_t line_len;
char *line, *end;
const char *p;
dns4_set = !c->ifi4 || !IN4_IS_ADDR_UNSPECIFIED(&c->ip4.dns[0]);
dns6_set = !c->ifi6 || !IN6_IS_ADDR_UNSPECIFIED(&c->ip6.dns[0]);
dnss_set = !!*s->n || c->no_dns_search;
dns_set = (dns4_set && dns6_set) || c->no_dns;
if (dns_set && dnss_set)
return;
if ((fd = open("/etc/resolv.conf", O_RDONLY | O_CLOEXEC)) < 0)
goto out;
lineread_init(&resolvconf, fd);
while ((line_len = lineread_get(&resolvconf, &line)) > 0) {
if (!dns_set && strstr(line, "nameserver ") == line) {
p = strrchr(line, ' ');
if (!p)
continue;
end = strpbrk(line, "%\n");
if (end)
*end = 0;
add_dns_resolv(c, p + 1,
dns4_set ? NULL : &dns4_idx,
dns6_set ? NULL : &dns6_idx);
} else if (!dnss_set && strstr(line, "search ") == line &&
s == c->dns_search) {
end = strpbrk(line, "\n");
if (end)
*end = 0;
/* cppcheck-suppress strtokCalled */
if (!strtok(line, " \t"))
continue;
while (s - c->dns_search < ARRAY_SIZE(c->dns_search) - 1
/* cppcheck-suppress strtokCalled */
&& (p = strtok(NULL, " \t"))) {
strncpy(s->n, p, sizeof(c->dns_search[0]) - 1);
s++;
*s->n = 0;
}
}
}
if (line_len < 0)
warn_perror("Error reading /etc/resolv.conf");
close(fd);
out:
if (!dns_set) {
if (!(dns4_idx + dns6_idx))
warn("Couldn't get any nameserver address");
if (c->no_dhcp_dns)
return;
if (c->ifi4 && !c->no_dhcp &&
IN4_IS_ADDR_UNSPECIFIED(&c->ip4.dns[0]))
warn("No IPv4 nameserver available for DHCP");
if (c->ifi6 && ((!c->no_ndp && !c->no_ra) || !c->no_dhcpv6) &&
IN6_IS_ADDR_UNSPECIFIED(&c->ip6.dns[0]))
warn("No IPv6 nameserver available for NDP/DHCPv6");
}
}
More deterministic detection of whether argument is a PID, PATH or NAME pasta takes as its only non-option argument either a PID to attach to the namespaces of, a PATH to a network namespace or a NAME of a network namespace (relative to /run/netns). Currently to determine which it is we try all 3 in that order, and if anything goes wrong we move onto the next. This has the potential to cause very confusing failure modes. e.g. if the argument is intended to be a network namespace name, but a (non-namespace) file of the same name exists in the current directory. Make behaviour more predictable by choosing how to treat the argument based only on the argument's contents, not anything else on the system: - If it's a decimal integer treat it as a PID - Otherwise, if it has no '/' characters, treat it as a netns name (ip-netns doesn't allow '/' in netns names) - Otherwise, treat it as a netns path If you want to open a persistent netns in the current directory, you can use './netns'. This also allows us to split the parsing of the PID|PATH|NAME option from the actual opening of the namespaces. In turn that allows us to put the opening of existing namespaces next to the opening of new namespaces in pasta_start_ns. That makes the logical flow easier to follow and will enable later cleanups. Caveats: - The separation of functions mean we will always generate the basename and dirname for the netns_quit system, even when using PID namespaces. This is pointless, since the netns_quit system doesn't work for non persistent namespaces, but is harmless. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-08-26 06:58:37 +02:00
/**
* conf_netns_opt() - Parse --netns option
* @netns: buffer of size PATH_MAX, updated with netns path
* @arg: --netns argument
*/
static void conf_netns_opt(char *netns, const char *arg)
{
int ret;
if (!strchr(arg, '/')) {
/* looks like a netns name */
ret = snprintf(netns, PATH_MAX, "%s/%s", NETNS_RUN_DIR, arg);
} else {
/* otherwise assume it's a netns path */
ret = snprintf(netns, PATH_MAX, "%s", arg);
}
if (ret <= 0 || ret > PATH_MAX)
die("Network namespace name/path %s too long", arg);
}
/**
* conf_pasta_ns() - Validate all pasta namespace options
* @netns_only: Don't use userns, may be updated
More deterministic detection of whether argument is a PID, PATH or NAME pasta takes as its only non-option argument either a PID to attach to the namespaces of, a PATH to a network namespace or a NAME of a network namespace (relative to /run/netns). Currently to determine which it is we try all 3 in that order, and if anything goes wrong we move onto the next. This has the potential to cause very confusing failure modes. e.g. if the argument is intended to be a network namespace name, but a (non-namespace) file of the same name exists in the current directory. Make behaviour more predictable by choosing how to treat the argument based only on the argument's contents, not anything else on the system: - If it's a decimal integer treat it as a PID - Otherwise, if it has no '/' characters, treat it as a netns name (ip-netns doesn't allow '/' in netns names) - Otherwise, treat it as a netns path If you want to open a persistent netns in the current directory, you can use './netns'. This also allows us to split the parsing of the PID|PATH|NAME option from the actual opening of the namespaces. In turn that allows us to put the opening of existing namespaces next to the opening of new namespaces in pasta_start_ns. That makes the logical flow easier to follow and will enable later cleanups. Caveats: - The separation of functions mean we will always generate the basename and dirname for the netns_quit system, even when using PID namespaces. This is pointless, since the netns_quit system doesn't work for non persistent namespaces, but is harmless. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-08-26 06:58:37 +02:00
* @userns: buffer of size PATH_MAX, initially contains --userns
* argument (may be empty), updated with userns path
* @netns: buffer of size PATH_MAX, initial contains --netns
* argument (may be empty), updated with netns path
* @optind: Index of first non-option argument
* @argc: Number of arguments
* @argv: Command line arguments
More deterministic detection of whether argument is a PID, PATH or NAME pasta takes as its only non-option argument either a PID to attach to the namespaces of, a PATH to a network namespace or a NAME of a network namespace (relative to /run/netns). Currently to determine which it is we try all 3 in that order, and if anything goes wrong we move onto the next. This has the potential to cause very confusing failure modes. e.g. if the argument is intended to be a network namespace name, but a (non-namespace) file of the same name exists in the current directory. Make behaviour more predictable by choosing how to treat the argument based only on the argument's contents, not anything else on the system: - If it's a decimal integer treat it as a PID - Otherwise, if it has no '/' characters, treat it as a netns name (ip-netns doesn't allow '/' in netns names) - Otherwise, treat it as a netns path If you want to open a persistent netns in the current directory, you can use './netns'. This also allows us to split the parsing of the PID|PATH|NAME option from the actual opening of the namespaces. In turn that allows us to put the opening of existing namespaces next to the opening of new namespaces in pasta_start_ns. That makes the logical flow easier to follow and will enable later cleanups. Caveats: - The separation of functions mean we will always generate the basename and dirname for the netns_quit system, even when using PID namespaces. This is pointless, since the netns_quit system doesn't work for non persistent namespaces, but is harmless. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-08-26 06:58:37 +02:00
*/
static void conf_pasta_ns(int *netns_only, char *userns, char *netns,
int optind, int argc, char *argv[])
More deterministic detection of whether argument is a PID, PATH or NAME pasta takes as its only non-option argument either a PID to attach to the namespaces of, a PATH to a network namespace or a NAME of a network namespace (relative to /run/netns). Currently to determine which it is we try all 3 in that order, and if anything goes wrong we move onto the next. This has the potential to cause very confusing failure modes. e.g. if the argument is intended to be a network namespace name, but a (non-namespace) file of the same name exists in the current directory. Make behaviour more predictable by choosing how to treat the argument based only on the argument's contents, not anything else on the system: - If it's a decimal integer treat it as a PID - Otherwise, if it has no '/' characters, treat it as a netns name (ip-netns doesn't allow '/' in netns names) - Otherwise, treat it as a netns path If you want to open a persistent netns in the current directory, you can use './netns'. This also allows us to split the parsing of the PID|PATH|NAME option from the actual opening of the namespaces. In turn that allows us to put the opening of existing namespaces next to the opening of new namespaces in pasta_start_ns. That makes the logical flow easier to follow and will enable later cleanups. Caveats: - The separation of functions mean we will always generate the basename and dirname for the netns_quit system, even when using PID namespaces. This is pointless, since the netns_quit system doesn't work for non persistent namespaces, but is harmless. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-08-26 06:58:37 +02:00
{
if (*netns && optind != argc)
die("Both --netns and PID or command given");
More deterministic detection of whether argument is a PID, PATH or NAME pasta takes as its only non-option argument either a PID to attach to the namespaces of, a PATH to a network namespace or a NAME of a network namespace (relative to /run/netns). Currently to determine which it is we try all 3 in that order, and if anything goes wrong we move onto the next. This has the potential to cause very confusing failure modes. e.g. if the argument is intended to be a network namespace name, but a (non-namespace) file of the same name exists in the current directory. Make behaviour more predictable by choosing how to treat the argument based only on the argument's contents, not anything else on the system: - If it's a decimal integer treat it as a PID - Otherwise, if it has no '/' characters, treat it as a netns name (ip-netns doesn't allow '/' in netns names) - Otherwise, treat it as a netns path If you want to open a persistent netns in the current directory, you can use './netns'. This also allows us to split the parsing of the PID|PATH|NAME option from the actual opening of the namespaces. In turn that allows us to put the opening of existing namespaces next to the opening of new namespaces in pasta_start_ns. That makes the logical flow easier to follow and will enable later cleanups. Caveats: - The separation of functions mean we will always generate the basename and dirname for the netns_quit system, even when using PID namespaces. This is pointless, since the netns_quit system doesn't work for non persistent namespaces, but is harmless. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-08-26 06:58:37 +02:00
if (optind + 1 == argc) {
char *endptr;
long pidval;
pidval = strtol(argv[optind], &endptr, 10);
if (!*endptr) {
/* Looks like a pid */
if (pidval < 0 || pidval > INT_MAX)
die("Invalid PID %s", argv[optind]);
treewide: Comply with CERT C rule ERR33-C for snprintf() clang-tidy, starting from LLVM version 16, up to at least LLVM version 19, now checks that we detect and handle errors for snprintf() as requested by CERT C rule ERR33-C. These warnings were logged with LLVM version 19.1.2 (at least Debian and Fedora match): /home/sbrivio/passt/arch.c:43:3: error: the value returned by this function should not be disregarded; neglecting it may lead to errors [cert-err33-c,-warnings-as-errors] 43 | snprintf(new_path, PATH_MAX + sizeof(".avx2"), "%s.avx2", exe); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/sbrivio/passt/arch.c:43:3: note: cast the expression to void to silence this warning /home/sbrivio/passt/conf.c:577:4: error: the value returned by this function should not be disregarded; neglecting it may lead to errors [cert-err33-c,-warnings-as-errors] 577 | snprintf(netns, PATH_MAX, "/proc/%ld/ns/net", pidval); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/sbrivio/passt/conf.c:577:4: note: cast the expression to void to silence this warning /home/sbrivio/passt/conf.c:579:5: error: the value returned by this function should not be disregarded; neglecting it may lead to errors [cert-err33-c,-warnings-as-errors] 579 | snprintf(userns, PATH_MAX, "/proc/%ld/ns/user", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 580 | pidval); | ~~~~~~~ /home/sbrivio/passt/conf.c:579:5: note: cast the expression to void to silence this warning /home/sbrivio/passt/pasta.c:105:2: error: the value returned by this function should not be disregarded; neglecting it may lead to errors [cert-err33-c,-warnings-as-errors] 105 | snprintf(ns, PATH_MAX, "/proc/%i/ns/net", pasta_child_pid); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/sbrivio/passt/pasta.c:105:2: note: cast the expression to void to silence this warning /home/sbrivio/passt/pasta.c:242:2: error: the value returned by this function should not be disregarded; neglecting it may lead to errors [cert-err33-c,-warnings-as-errors] 242 | snprintf(uidmap, BUFSIZ, "0 %u 1", uid); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/sbrivio/passt/pasta.c:242:2: note: cast the expression to void to silence this warning /home/sbrivio/passt/pasta.c:243:2: error: the value returned by this function should not be disregarded; neglecting it may lead to errors [cert-err33-c,-warnings-as-errors] 243 | snprintf(gidmap, BUFSIZ, "0 %u 1", gid); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/sbrivio/passt/pasta.c:243:2: note: cast the expression to void to silence this warning /home/sbrivio/passt/tap.c:1155:4: error: the value returned by this function should not be disregarded; neglecting it may lead to errors [cert-err33-c,-warnings-as-errors] 1155 | snprintf(path, UNIX_PATH_MAX - 1, UNIX_SOCK_PATH, i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /home/sbrivio/passt/tap.c:1155:4: note: cast the expression to void to silence this warning Don't silence the warnings as they might actually have some merit. Add an snprintf_check() function, instead, checking that we're not truncating messages while printing to buffers, and terminate if the check fails. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2024-10-24 23:25:33 +02:00
if (snprintf_check(netns, PATH_MAX,
"/proc/%ld/ns/net", pidval))
die_perror("Can't build netns path");
if (!*userns) {
if (snprintf_check(userns, PATH_MAX,
"/proc/%ld/ns/user", pidval))
die_perror("Can't build userns path");
}
More deterministic detection of whether argument is a PID, PATH or NAME pasta takes as its only non-option argument either a PID to attach to the namespaces of, a PATH to a network namespace or a NAME of a network namespace (relative to /run/netns). Currently to determine which it is we try all 3 in that order, and if anything goes wrong we move onto the next. This has the potential to cause very confusing failure modes. e.g. if the argument is intended to be a network namespace name, but a (non-namespace) file of the same name exists in the current directory. Make behaviour more predictable by choosing how to treat the argument based only on the argument's contents, not anything else on the system: - If it's a decimal integer treat it as a PID - Otherwise, if it has no '/' characters, treat it as a netns name (ip-netns doesn't allow '/' in netns names) - Otherwise, treat it as a netns path If you want to open a persistent netns in the current directory, you can use './netns'. This also allows us to split the parsing of the PID|PATH|NAME option from the actual opening of the namespaces. In turn that allows us to put the opening of existing namespaces next to the opening of new namespaces in pasta_start_ns. That makes the logical flow easier to follow and will enable later cleanups. Caveats: - The separation of functions mean we will always generate the basename and dirname for the netns_quit system, even when using PID namespaces. This is pointless, since the netns_quit system doesn't work for non persistent namespaces, but is harmless. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-08-26 06:58:37 +02:00
}
}
More deterministic detection of whether argument is a PID, PATH or NAME pasta takes as its only non-option argument either a PID to attach to the namespaces of, a PATH to a network namespace or a NAME of a network namespace (relative to /run/netns). Currently to determine which it is we try all 3 in that order, and if anything goes wrong we move onto the next. This has the potential to cause very confusing failure modes. e.g. if the argument is intended to be a network namespace name, but a (non-namespace) file of the same name exists in the current directory. Make behaviour more predictable by choosing how to treat the argument based only on the argument's contents, not anything else on the system: - If it's a decimal integer treat it as a PID - Otherwise, if it has no '/' characters, treat it as a netns name (ip-netns doesn't allow '/' in netns names) - Otherwise, treat it as a netns path If you want to open a persistent netns in the current directory, you can use './netns'. This also allows us to split the parsing of the PID|PATH|NAME option from the actual opening of the namespaces. In turn that allows us to put the opening of existing namespaces next to the opening of new namespaces in pasta_start_ns. That makes the logical flow easier to follow and will enable later cleanups. Caveats: - The separation of functions mean we will always generate the basename and dirname for the netns_quit system, even when using PID namespaces. This is pointless, since the netns_quit system doesn't work for non persistent namespaces, but is harmless. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-08-26 06:58:37 +02:00
/* Attaching to a netns/PID, with no userns given */
if (*netns && !*userns)
*netns_only = 1;
More deterministic detection of whether argument is a PID, PATH or NAME pasta takes as its only non-option argument either a PID to attach to the namespaces of, a PATH to a network namespace or a NAME of a network namespace (relative to /run/netns). Currently to determine which it is we try all 3 in that order, and if anything goes wrong we move onto the next. This has the potential to cause very confusing failure modes. e.g. if the argument is intended to be a network namespace name, but a (non-namespace) file of the same name exists in the current directory. Make behaviour more predictable by choosing how to treat the argument based only on the argument's contents, not anything else on the system: - If it's a decimal integer treat it as a PID - Otherwise, if it has no '/' characters, treat it as a netns name (ip-netns doesn't allow '/' in netns names) - Otherwise, treat it as a netns path If you want to open a persistent netns in the current directory, you can use './netns'. This also allows us to split the parsing of the PID|PATH|NAME option from the actual opening of the namespaces. In turn that allows us to put the opening of existing namespaces next to the opening of new namespaces in pasta_start_ns. That makes the logical flow easier to follow and will enable later cleanups. Caveats: - The separation of functions mean we will always generate the basename and dirname for the netns_quit system, even when using PID namespaces. This is pointless, since the netns_quit system doesn't work for non persistent namespaces, but is harmless. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-08-26 06:58:37 +02:00
}
/** conf_ip4_prefix() - Parse an IPv4 prefix length or netmask
* @arg: Netmask in dotted decimal or prefix length
*
* Return: Validated prefix length on success, -1 on failure
*/
static int conf_ip4_prefix(const char *arg)
{
struct in_addr mask;
unsigned long len;
if (inet_pton(AF_INET, arg, &mask)) {
in_addr_t hmask = ntohl(mask.s_addr);
len = __builtin_popcount(hmask);
if ((hmask << len) != 0)
return -1;
} else {
errno = 0;
len = strtoul(optarg, NULL, 0);
if (len > 32 || errno)
return -1;
}
return len;
}
/**
* conf_ip4() - Verify or detect IPv4 support, get relevant addresses
* @ifi: Host interface to attempt (0 to determine one)
* @ip4: IPv4 context (will be written)
*
* Return: Interface index for IPv4, or 0 on failure.
*/
static unsigned int conf_ip4(unsigned int ifi, struct ip4_ctx *ip4)
{
if (!ifi)
ifi = nl_get_ext_if(nl_sock, AF_INET);
if (!ifi) {
info("Couldn't pick external interface: disabling IPv4");
return 0;
}
if (IN4_IS_ADDR_UNSPECIFIED(&ip4->guest_gw)) {
int rc = nl_route_get_def(nl_sock, ifi, AF_INET,
&ip4->guest_gw);
if (rc < 0) {
err("Couldn't discover IPv4 gateway address: %s",
strerror(-rc));
return 0;
}
}
if (IN4_IS_ADDR_UNSPECIFIED(&ip4->addr)) {
int rc = nl_addr_get(nl_sock, ifi, AF_INET,
&ip4->addr, &ip4->prefix_len, NULL);
if (rc < 0) {
err("Couldn't discover IPv4 address: %s",
strerror(-rc));
return 0;
}
}
if (!ip4->prefix_len) {
in_addr_t addr = ntohl(ip4->addr.s_addr);
if (IN_CLASSA(addr))
ip4->prefix_len = (32 - IN_CLASSA_NSHIFT);
else if (IN_CLASSB(addr))
ip4->prefix_len = (32 - IN_CLASSB_NSHIFT);
else if (IN_CLASSC(addr))
ip4->prefix_len = (32 - IN_CLASSC_NSHIFT);
else
ip4->prefix_len = 32;
}
ip4->addr_seen = ip4->addr;
ip4->our_tap_addr = ip4->guest_gw;
if (IN4_IS_ADDR_UNSPECIFIED(&ip4->addr))
return 0;
return ifi;
}
/**
* conf_ip6() - Verify or detect IPv6 support, get relevant addresses
* @ifi: Host interface to attempt (0 to determine one)
* @ip6: IPv6 context (will be written)
*
* Return: Interface index for IPv6, or 0 on failure.
*/
static unsigned int conf_ip6(unsigned int ifi, struct ip6_ctx *ip6)
{
int prefix_len = 0;
int rc;
if (!ifi)
ifi = nl_get_ext_if(nl_sock, AF_INET6);
if (!ifi) {
info("Couldn't pick external interface: disabling IPv6");
return 0;
}
if (IN6_IS_ADDR_UNSPECIFIED(&ip6->guest_gw)) {
rc = nl_route_get_def(nl_sock, ifi, AF_INET6, &ip6->guest_gw);
if (rc < 0) {
err("Couldn't discover IPv6 gateway address: %s",
strerror(-rc));
return 0;
}
}
rc = nl_addr_get(nl_sock, ifi, AF_INET6,
IN6_IS_ADDR_UNSPECIFIED(&ip6->addr) ? &ip6->addr : NULL,
&prefix_len, &ip6->our_tap_ll);
if (rc < 0) {
err("Couldn't discover IPv6 address: %s", strerror(-rc));
return 0;
}
ip6->addr_seen = ip6->addr;
if (IN6_IS_ADDR_LINKLOCAL(&ip6->guest_gw))
ip6->our_tap_ll = ip6->guest_gw;
if (IN6_IS_ADDR_UNSPECIFIED(&ip6->addr) ||
IN6_IS_ADDR_UNSPECIFIED(&ip6->our_tap_ll))
return 0;
return ifi;
}
/**
* usage() - Print usage, exit with given status code
* @name: Executable name
* @f: Stream to print usage info to
* @status: Status code for exit()
*/
static void usage(const char *name, FILE *f, int status)
{
if (strstr(name, "pasta")) {
FPRINTF(f, "Usage: %s [OPTION]... [COMMAND] [ARGS]...\n", name);
FPRINTF(f, " %s [OPTION]... PID\n", name);
FPRINTF(f, " %s [OPTION]... --netns [PATH|NAME]\n", name);
FPRINTF(f,
"\n"
"Without PID or --netns, run the given command or a\n"
"default shell in a new network and user namespace, and\n"
"connect it via pasta.\n");
} else {
FPRINTF(f, "Usage: %s [OPTION]...\n", name);
}
FPRINTF(f,
"\n"
" -d, --debug Be verbose\n"
" --trace Be extra verbose, implies --debug\n"
" -q, --quiet Don't print informational messages\n"
" -f, --foreground Don't run in background\n"
conf, passt: Make --stderr do nothing, and deprecate it The original behaviour of printing messages to standard error by default when running from a non-interactive terminal was introduced because the first KubeVirt integration draft used to start passt in foreground and get messages via standard error. For development purposes, the system logger was more convenient at that point, and passt was running from interactive terminals only if not started by the KubeVirt integration. This behaviour was introduced by 84a62b79a2bc ("passt: Also log to stderr, don't fork to background if not interactive"). Later, I added command-line options in 1e49d194d017 ("passt, pasta: Introduce command-line options and port re-mapping") and accidentally reversed this condition, which wasn't a problem as --stderr could force printing to standard error anyway (and it was used by KubeVirt). Nowadays, the KubeVirt integration uses a log file (requested via libvirt configuration), and the same applies for Podman if one actually needs to look at runtime logs. There are no use cases left, as far as I know, where passt runs in foreground in non-interactive terminals. Seize the chance to reintroduce some sanity here. If we fork to background, standard error is closed, so --stderr is useless in that case. If we run in foreground, there's no harm in printing messages to standard error, and that accidentally became the default behaviour anyway, so --stderr is not needed in that case. It would be needed for non-interactive terminals, but there are no use cases, and if there were, let's log to standard error anyway: the user can always redirect standard error to /dev/null if needed. Before we're up and running, we need to print to standard error anyway if something happens, otherwise we can't report failure to start in any kind of usage, stand-alone or in integrations. So, make --stderr do nothing, and deprecate it. While at it, drop a left-over comment about --foreground being the default only for interactive terminals, because it's not the case anymore. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2024-06-19 20:10:10 +02:00
" default: run in background\n"
" -l, --log-file PATH Log (only) to given file\n"
" --log-size BYTES Maximum size of log file\n"
" default: 1 MiB\n"
" --runas UID|UID:GID Run as given UID, GID, which can be\n"
" numeric, or login and group names\n"
" default: drop to user \"nobody\"\n"
" -h, --help Display this help message and exit\n"
" --version Show version and exit\n");
if (strstr(name, "pasta")) {
FPRINTF(f,
" -I, --ns-ifname NAME namespace interface name\n"
" default: same interface name as external one\n");
} else {
FPRINTF(f,
" -s, --socket PATH UNIX domain socket path\n"
" default: probe free path starting from "
UNIX_SOCK_PATH "\n", 1);
}
FPRINTF(f,
" -F, --fd FD Use FD as pre-opened connected socket\n"
" -p, --pcap FILE Log tap-facing traffic to pcap file\n"
" -P, --pid FILE Write own PID to the given file\n"
" -m, --mtu MTU Assign MTU via DHCP/NDP\n"
" a zero value disables assignment\n"
" default: 65520: maximum 802.3 MTU minus 802.3 header\n"
" length, rounded to 32 bits (IPv4 words)\n"
" -a, --address ADDR Assign IPv4 or IPv6 address ADDR\n"
" can be specified zero to two times (for IPv4 and IPv6)\n"
" default: use addresses from interface with default route\n"
" -n, --netmask MASK Assign IPv4 MASK, dot-decimal or bits\n"
" default: netmask from matching address on the host\n"
" -M, --mac-addr ADDR Use source MAC address ADDR\n"
" default: MAC address from interface with default route\n"
" -g, --gateway ADDR Pass IPv4 or IPv6 address as gateway\n"
" default: gateway from interface with default route\n"
" -i, --interface NAME Interface for addresses and routes\n"
" default: from --outbound-if4 and --outbound-if6, if any\n"
" otherwise interface with first default route\n"
" -o, --outbound ADDR Bind to address as outbound source\n"
" can be specified zero to two times (for IPv4 and IPv6)\n"
" default: use source address from routing tables\n"
" --outbound-if4 NAME Bind to outbound interface for IPv4\n"
" default: use interface from default route\n"
" --outbound-if6 NAME Bind to outbound interface for IPv6\n"
" default: use interface from default route\n"
" -D, --dns ADDR Use IPv4 or IPv6 address as DNS\n"
" can be specified multiple times\n"
" a single, empty option disables DNS information\n");
if (strstr(name, "pasta"))
FPRINTF(f, " default: don't use any addresses\n");
else
FPRINTF(f, " default: use addresses from /etc/resolv.conf\n");
FPRINTF(f,
" -S, --search LIST Space-separated list, search domains\n"
" a single, empty option disables the DNS search list\n");
if (strstr(name, "pasta"))
FPRINTF(f, " default: don't use any search list\n");
else
FPRINTF(f, " default: use search list from /etc/resolv.conf\n");
if (strstr(name, "pasta"))
FPRINTF(f, " --dhcp-dns \tPass DNS list via DHCP/DHCPv6/NDP\n");
else
FPRINTF(f, " --no-dhcp-dns No DNS list in DHCP/DHCPv6/NDP\n");
if (strstr(name, "pasta"))
FPRINTF(f, " --dhcp-search Pass list via DHCP/DHCPv6/NDP\n");
else
FPRINTF(f, " --no-dhcp-search No list in DHCP/DHCPv6/NDP\n");
FPRINTF(f,
" --map-host-loopback ADDR Translate ADDR to refer to host\n"
" can be specified zero to two times (for IPv4 and IPv6)\n"
" default: gateway address\n"
" --map-guest-addr ADDR Translate ADDR to guest's address\n"
" can be specified zero to two times (for IPv4 and IPv6)\n"
" default: none\n"
" --dns-forward ADDR Forward DNS queries sent to ADDR\n"
" can be specified zero to two times (for IPv4 and IPv6)\n"
" default: don't forward DNS queries\n"
" --dns-host ADDR Host nameserver to direct queries to\n"
" can be specified zero to two times (for IPv4 and IPv6)\n"
" default: first nameserver from host's /etc/resolv.conf\n"
" --no-tcp Disable TCP protocol handler\n"
" --no-udp Disable UDP protocol handler\n"
" --no-icmp Disable ICMP/ICMPv6 protocol handler\n"
" --no-dhcp Disable DHCP server\n"
" --no-ndp Disable NDP responses\n"
" --no-dhcpv6 Disable DHCPv6 server\n"
" --no-ra Disable router advertisements\n"
" --freebind Bind to any address for forwarding\n"
" --no-map-gw Don't map gateway address to host\n"
" -4, --ipv4-only Enable IPv4 operation only\n"
" -6, --ipv6-only Enable IPv6 operation only\n");
if (strstr(name, "pasta"))
goto pasta_opts;
FPRINTF(f,
" -1, --one-off Quit after handling one single client\n"
" -t, --tcp-ports SPEC TCP port forwarding to guest\n"
" can be specified multiple times\n"
" SPEC can be:\n"
" 'none': don't forward any ports\n"
" 'all': forward all unbound, non-ephemeral ports\n"
" a comma-separated list, optionally ranged with '-'\n"
" and optional target ports after ':', with optional\n"
" address specification suffixed by '/' and optional\n"
" interface prefixed by '%%'. Ranges can be reduced by\n"
" excluding ports or ranges prefixed by '~'\n"
" Examples:\n"
" -t 22 Forward local port 22 to 22 on guest\n"
" -t 22:23 Forward local port 22 to 23 on guest\n"
" -t 22,25 Forward ports 22, 25 to ports 22, 25\n"
" -t 22-80 Forward ports 22 to 80\n"
" -t 22-80:32-90 Forward ports 22 to 80 to\n"
" corresponding port numbers plus 10\n"
" -t 192.0.2.1/5 Bind port 5 of 192.0.2.1 to guest\n"
" -t 5-25,~10-20 Forward ports 5 to 9, and 21 to 25\n"
" -t ~25 Forward all ports except for 25\n"
" default: none\n"
" -u, --udp-ports SPEC UDP port forwarding to guest\n"
" SPEC is as described for TCP above\n"
" default: none\n");
exit(status);
pasta_opts:
FPRINTF(f,
" -t, --tcp-ports SPEC TCP port forwarding to namespace\n"
" can be specified multiple times\n"
" SPEC can be:\n"
" 'none': don't forward any ports\n"
" 'auto': forward all ports currently bound in namespace\n"
" a comma-separated list, optionally ranged with '-'\n"
" and optional target ports after ':', with optional\n"
" address specification suffixed by '/' and optional\n"
" interface prefixed by '%%'. Examples:\n"
" -t 22 Forward local port 22 to port 22 in netns\n"
" -t 22:23 Forward local port 22 to port 23\n"
" -t 22,25 Forward ports 22, 25 to ports 22, 25\n"
" -t 22-80 Forward ports 22 to 80\n"
" -t 22-80:32-90 Forward ports 22 to 80 to\n"
" corresponding port numbers plus 10\n"
" -t 192.0.2.1/5 Bind port 5 of 192.0.2.1 to namespace\n"
" -t 5-25,~10-20 Forward ports 5 to 9, and 21 to 25\n"
" -t ~25 Forward all bound ports except for 25\n"
" default: auto\n"
" IPv6 bound ports are also forwarded for IPv4\n"
" -u, --udp-ports SPEC UDP port forwarding to namespace\n"
" SPEC is as described for TCP above\n"
" default: auto\n"
" IPv6 bound ports are also forwarded for IPv4\n"
" unless specified, with '-t auto', UDP ports with numbers\n"
" corresponding to forwarded TCP port numbers are\n"
" forwarded too\n"
" -T, --tcp-ns SPEC TCP port forwarding to init namespace\n"
" SPEC is as described above\n"
" default: auto\n"
" -U, --udp-ns SPEC UDP port forwarding to init namespace\n"
" SPEC is as described above\n"
" default: auto\n"
" --host-lo-to-ns-lo DEPRECATED:\n"
" Translate host-loopback forwards to\n"
" namespace loopback\n"
" --userns NSPATH Target user namespace to join\n"
" --netns PATH|NAME Target network namespace to join\n"
" --netns-only Don't join existing user namespace\n"
" implied if PATH or NAME are given without --userns\n"
" --no-netns-quit Don't quit if filesystem-bound target\n"
" network namespace is deleted\n"
" --config-net Configure tap interface in namespace\n"
" --no-copy-routes DEPRECATED:\n"
" Don't copy all routes to namespace\n"
" --no-copy-addrs DEPRECATED:\n"
" Don't copy all addresses to namespace\n"
" --ns-mac-addr ADDR Set MAC address on tap interface\n");
exit(status);
}
/**
* conf_print() - Print fundamental configuration parameters
* @c: Execution context
*/
static void conf_print(const struct ctx *c)
{
char buf4[INET_ADDRSTRLEN], buf6[INET6_ADDRSTRLEN];
char bufmac[ETH_ADDRSTRLEN], ifn[IFNAMSIZ];
int i;
info("Template interface: %s%s%s%s%s",
c->ifi4 ? if_indextoname(c->ifi4, ifn) : "",
c->ifi4 ? " (IPv4)" : "",
(c->ifi4 && c->ifi6) ? ", " : "",
c->ifi6 ? if_indextoname(c->ifi6, ifn) : "",
c->ifi6 ? " (IPv6)" : "");
conf, icmp, tcp, udp: Add options to bind to outbound address and interface I didn't notice earlier: libslirp (and slirp4netns) supports binding outbound sockets to specific IPv4 and IPv6 addresses, to force the source addresse selection. If we want to claim feature parity, we should implement that as well. Further, Podman supports specifying outbound interfaces as well, but this is simply done by resolving the primary address for an interface when the network back-end is started. However, since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can actually bind to a specific interface name, which doesn't need to be validated in advance. Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses, and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets to given interfaces. Given that it probably makes little sense to select addresses and routes from interfaces different than the ones given for outbound sockets, also assign those as "template" interfaces, by default, unless explicitly overridden by '-i'. For ICMP and UDP, we call sock_l4() to open outbound sockets, as we already needed to bind to given ports or echo identifiers, and we can bind() a socket only once: there, pass address (if any) and interface (if any) for the existing bind() and setsockopt() calls. For TCP, in general, we wouldn't otherwise bind sockets. Add a specific helper to do that. For UDP outbound sockets, we need to know if the final destination of the socket is a loopback address, before we decide whether it makes sense to bind the socket at all: move the block mangling the address destination before the creation of the socket in the IPv4 path. This was already the case for the IPv6 path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 03:29:51 +01:00
if (*c->ip4.ifname_out || *c->ip6.ifname_out) {
info("Outbound interface: %s%s%s%s%s",
*c->ip4.ifname_out ? c->ip4.ifname_out : "",
*c->ip4.ifname_out ? " (IPv4)" : "",
(*c->ip4.ifname_out && *c->ip6.ifname_out) ? ", " : "",
*c->ip6.ifname_out ? c->ip6.ifname_out : "",
*c->ip6.ifname_out ? " (IPv6)" : "");
}
if (!IN4_IS_ADDR_UNSPECIFIED(&c->ip4.addr_out) ||
!IN6_IS_ADDR_UNSPECIFIED(&c->ip6.addr_out)) {
info("Outbound address: %s%s%s",
IN4_IS_ADDR_UNSPECIFIED(&c->ip4.addr_out) ? "" :
inet_ntop(AF_INET, &c->ip4.addr_out, buf4, sizeof(buf4)),
(!IN4_IS_ADDR_UNSPECIFIED(&c->ip4.addr_out) &&
!IN6_IS_ADDR_UNSPECIFIED(&c->ip6.addr_out)) ? ", " : "",
IN6_IS_ADDR_UNSPECIFIED(&c->ip6.addr_out) ? "" :
inet_ntop(AF_INET6, &c->ip6.addr_out, buf6, sizeof(buf6)));
}
if (c->mode == MODE_PASTA)
info("Namespace interface: %s", c->pasta_ifn);
info("MAC:");
info(" host: %s", eth_ntop(c->our_tap_mac, bufmac, sizeof(bufmac)));
if (c->ifi4) {
if (!IN4_IS_ADDR_UNSPECIFIED(&c->ip4.map_host_loopback))
info(" NAT to host 127.0.0.1: %s",
inet_ntop(AF_INET, &c->ip4.map_host_loopback,
buf4, sizeof(buf4)));
if (!c->no_dhcp) {
uint32_t mask;
mask = htonl(0xffffffff << (32 - c->ip4.prefix_len));
info("DHCP:");
info(" assign: %s",
inet_ntop(AF_INET, &c->ip4.addr, buf4, sizeof(buf4)));
info(" mask: %s",
inet_ntop(AF_INET, &mask, buf4, sizeof(buf4)));
info(" router: %s",
inet_ntop(AF_INET, &c->ip4.guest_gw,
buf4, sizeof(buf4)));
}
for (i = 0; !IN4_IS_ADDR_UNSPECIFIED(&c->ip4.dns[i]); i++) {
if (!i)
info("DNS:");
inet_ntop(AF_INET, &c->ip4.dns[i], buf4, sizeof(buf4));
info(" %s", buf4);
}
for (i = 0; *c->dns_search[i].n; i++) {
if (!i)
info("DNS search list:");
info(" %s", c->dns_search[i].n);
}
}
if (c->ifi6) {
if (!IN6_IS_ADDR_UNSPECIFIED(&c->ip6.map_host_loopback))
info(" NAT to host ::1: %s",
inet_ntop(AF_INET6, &c->ip6.map_host_loopback,
buf6, sizeof(buf6)));
if (!c->no_ndp && !c->no_dhcpv6)
info("NDP/DHCPv6:");
else if (!c->no_ndp)
info("DHCPv6:");
else if (!c->no_dhcpv6)
info("NDP:");
else
goto dns6;
info(" assign: %s",
inet_ntop(AF_INET6, &c->ip6.addr, buf6, sizeof(buf6)));
info(" router: %s",
inet_ntop(AF_INET6, &c->ip6.guest_gw, buf6, sizeof(buf6)));
info(" our link-local: %s",
inet_ntop(AF_INET6, &c->ip6.our_tap_ll,
buf6, sizeof(buf6)));
dns6:
for (i = 0; !IN6_IS_ADDR_UNSPECIFIED(&c->ip6.dns[i]); i++) {
if (!i)
info("DNS:");
inet_ntop(AF_INET6, &c->ip6.dns[i], buf6, sizeof(buf6));
info(" %s", buf6);
}
for (i = 0; *c->dns_search[i].n; i++) {
if (!i)
info("DNS search list:");
info(" %s", c->dns_search[i].n);
}
}
}
/**
* conf_runas() - Handle --runas: look up desired UID and GID
* @opt: Passed option value
* @uid: User ID, set on return if valid
* @gid: Group ID, set on return if valid
*
* Return: 0 on success, negative error code on failure
*/
static int conf_runas(char *opt, unsigned int *uid, unsigned int *gid)
{
const char *uopt, *gopt = NULL;
char *sep = strchr(opt, ':');
char *endptr;
if (sep) {
*sep = '\0';
gopt = sep + 1;
}
uopt = opt;
*gid = *uid = strtol(uopt, &endptr, 0);
if (*endptr) {
#ifndef GLIBC_NO_STATIC_NSS
/* Not numeric, look up as a username */
const struct passwd *pw;
/* cppcheck-suppress getpwnamCalled */
if (!(pw = getpwnam(uopt)) || !(*uid = pw->pw_uid))
return -ENOENT;
*gid = pw->pw_gid;
#else
return -EINVAL;
#endif
}
if (!gopt)
return 0;
*gid = strtol(gopt, &endptr, 0);
if (*endptr) {
#ifndef GLIBC_NO_STATIC_NSS
/* Not numeric, look up as a group name */
const struct group *gr;
/* cppcheck-suppress getgrnamCalled */
if (!(gr = getgrnam(gopt)))
return -ENOENT;
*gid = gr->gr_gid;
#else
return -EINVAL;
#endif
}
return 0;
}
/**
* conf_ugid() - Determine UID and GID to run as
* @runas: --runas option, may be NULL
* @uid: User ID, set on success
* @gid: Group ID, set on success
*/
static void conf_ugid(char *runas, uid_t *uid, gid_t *gid)
{
/* If user has specified --runas, that takes precedence... */
if (runas) {
if (conf_runas(runas, uid, gid))
die("Invalid --runas option: %s", runas);
return;
}
/* ...otherwise default to current user and group... */
*uid = geteuid();
*gid = getegid();
/* ...as long as it's not root... */
if (*uid)
return;
/* ...or at least not root in the init namespace... */
if (!ns_is_init())
return;
/* ...otherwise use nobody:nobody */
warn("Started as root, will change to nobody.");
{
#ifndef GLIBC_NO_STATIC_NSS
const struct passwd *pw;
/* cppcheck-suppress getpwnamCalled */
pw = getpwnam("nobody");
if (!pw)
die_perror("Can't get password file entry for nobody");
*uid = pw->pw_uid;
*gid = pw->pw_gid;
#else
/* Common value for 'nobody', not really specified */
*uid = *gid = 65534;
#endif
}
}
/**
* conf_nat() - Parse --map-host-loopback or --map-guest-addr option
* @arg: String argument to option
* @addr4: IPv4 to update with parsed address
* @addr6: IPv6 to update with parsed address
* @no_map_gw: --no-map-gw flag, or NULL, updated for "none" argument
*/
static void conf_nat(const char *arg, struct in_addr *addr4,
struct in6_addr *addr6, int *no_map_gw)
{
if (strcmp(arg, "none") == 0) {
*addr4 = in4addr_any;
*addr6 = in6addr_any;
if (no_map_gw)
*no_map_gw = 1;
}
if (inet_pton(AF_INET6, arg, addr6) &&
!IN6_IS_ADDR_UNSPECIFIED(addr6) &&
!IN6_IS_ADDR_LOOPBACK(addr6) &&
!IN6_IS_ADDR_MULTICAST(addr6))
return;
if (inet_pton(AF_INET, arg, addr4) &&
!IN4_IS_ADDR_UNSPECIFIED(addr4) &&
!IN4_IS_ADDR_LOOPBACK(addr4) &&
!IN4_IS_ADDR_MULTICAST(addr4))
return;
die("Invalid address to remap to host: %s", optarg);
}
/**
* conf_open_files() - Open files as requested by configuration
* @c: Execution context
*/
static void conf_open_files(struct ctx *c)
{
if (c->mode != MODE_PASTA && c->fd_tap == -1)
c->fd_tap_listen = tap_sock_unix_open(c->sock_path);
if (*c->pidfile) {
c->pidfile_fd = output_file_open(c->pidfile, O_WRONLY);
if (c->pidfile_fd < 0)
die_perror("Couldn't open PID file %s", c->pidfile);
}
}
/**
* parse_mac - Parse a MAC address from a string
* @mac: Binary MAC address, initialised on success
* @str: String to parse
*
* Parses @str as an Ethernet MAC address stored in @mac on success. Exits on
* failure.
*/
static void parse_mac(unsigned char mac[ETH_ALEN], const char *str)
{
size_t i;
if (strlen(str) != (ETH_ALEN * 3 - 1))
goto fail;
for (i = 0; i < ETH_ALEN; i++) {
const char *octet = str + 3 * i;
unsigned long b;
char *end;
errno = 0;
b = strtoul(octet, &end, 16);
if (b > UCHAR_MAX || errno || end != octet + 2 ||
*end != ((i == ETH_ALEN - 1) ? '\0' : ':'))
goto fail;
mac[i] = b;
}
return;
fail:
die("Invalid MAC address: %s", str);
}
/**
* conf() - Process command-line arguments and set configuration
* @c: Execution context
* @argc: Argument count
* @argv: Options, plus target PID for pasta mode
*/
void conf(struct ctx *c, int argc, char **argv)
{
int netns_only = 0, no_map_gw = 0;
const struct option options[] = {
{"debug", no_argument, NULL, 'd' },
{"quiet", no_argument, NULL, 'q' },
{"foreground", no_argument, NULL, 'f' },
{"stderr", no_argument, NULL, 'e' },
{"log-file", required_argument, NULL, 'l' },
{"help", no_argument, NULL, 'h' },
{"socket", required_argument, NULL, 's' },
{"fd", required_argument, NULL, 'F' },
{"ns-ifname", required_argument, NULL, 'I' },
{"pcap", required_argument, NULL, 'p' },
{"pid", required_argument, NULL, 'P' },
{"mtu", required_argument, NULL, 'm' },
{"address", required_argument, NULL, 'a' },
{"netmask", required_argument, NULL, 'n' },
{"mac-addr", required_argument, NULL, 'M' },
{"gateway", required_argument, NULL, 'g' },
{"interface", required_argument, NULL, 'i' },
conf, icmp, tcp, udp: Add options to bind to outbound address and interface I didn't notice earlier: libslirp (and slirp4netns) supports binding outbound sockets to specific IPv4 and IPv6 addresses, to force the source addresse selection. If we want to claim feature parity, we should implement that as well. Further, Podman supports specifying outbound interfaces as well, but this is simply done by resolving the primary address for an interface when the network back-end is started. However, since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can actually bind to a specific interface name, which doesn't need to be validated in advance. Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses, and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets to given interfaces. Given that it probably makes little sense to select addresses and routes from interfaces different than the ones given for outbound sockets, also assign those as "template" interfaces, by default, unless explicitly overridden by '-i'. For ICMP and UDP, we call sock_l4() to open outbound sockets, as we already needed to bind to given ports or echo identifiers, and we can bind() a socket only once: there, pass address (if any) and interface (if any) for the existing bind() and setsockopt() calls. For TCP, in general, we wouldn't otherwise bind sockets. Add a specific helper to do that. For UDP outbound sockets, we need to know if the final destination of the socket is a loopback address, before we decide whether it makes sense to bind the socket at all: move the block mangling the address destination before the creation of the socket in the IPv4 path. This was already the case for the IPv6 path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 03:29:51 +01:00
{"outbound", required_argument, NULL, 'o' },
{"dns", required_argument, NULL, 'D' },
{"search", required_argument, NULL, 'S' },
{"no-tcp", no_argument, &c->no_tcp, 1 },
{"no-udp", no_argument, &c->no_udp, 1 },
{"no-icmp", no_argument, &c->no_icmp, 1 },
{"no-dhcp", no_argument, &c->no_dhcp, 1 },
{"no-dhcpv6", no_argument, &c->no_dhcpv6, 1 },
{"no-ndp", no_argument, &c->no_ndp, 1 },
{"no-ra", no_argument, &c->no_ra, 1 },
{"freebind", no_argument, &c->freebind, 1 },
{"no-map-gw", no_argument, &no_map_gw, 1 },
{"ipv4-only", no_argument, NULL, '4' },
{"ipv6-only", no_argument, NULL, '6' },
{"one-off", no_argument, NULL, '1' },
{"tcp-ports", required_argument, NULL, 't' },
{"udp-ports", required_argument, NULL, 'u' },
{"tcp-ns", required_argument, NULL, 'T' },
{"udp-ns", required_argument, NULL, 'U' },
{"userns", required_argument, NULL, 2 },
{"netns", required_argument, NULL, 3 },
{"ns-mac-addr", required_argument, NULL, 4 },
{"dhcp-dns", no_argument, NULL, 5 },
{"no-dhcp-dns", no_argument, NULL, 6 },
{"dhcp-search", no_argument, NULL, 7 },
{"no-dhcp-search", no_argument, NULL, 8 },
{"dns-forward", required_argument, NULL, 9 },
{"no-netns-quit", no_argument, NULL, 10 },
{"trace", no_argument, NULL, 11 },
{"runas", required_argument, NULL, 12 },
{"log-size", required_argument, NULL, 13 },
{"version", no_argument, NULL, 14 },
conf, icmp, tcp, udp: Add options to bind to outbound address and interface I didn't notice earlier: libslirp (and slirp4netns) supports binding outbound sockets to specific IPv4 and IPv6 addresses, to force the source addresse selection. If we want to claim feature parity, we should implement that as well. Further, Podman supports specifying outbound interfaces as well, but this is simply done by resolving the primary address for an interface when the network back-end is started. However, since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can actually bind to a specific interface name, which doesn't need to be validated in advance. Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses, and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets to given interfaces. Given that it probably makes little sense to select addresses and routes from interfaces different than the ones given for outbound sockets, also assign those as "template" interfaces, by default, unless explicitly overridden by '-i'. For ICMP and UDP, we call sock_l4() to open outbound sockets, as we already needed to bind to given ports or echo identifiers, and we can bind() a socket only once: there, pass address (if any) and interface (if any) for the existing bind() and setsockopt() calls. For TCP, in general, we wouldn't otherwise bind sockets. Add a specific helper to do that. For UDP outbound sockets, we need to know if the final destination of the socket is a loopback address, before we decide whether it makes sense to bind the socket at all: move the block mangling the address destination before the creation of the socket in the IPv4 path. This was already the case for the IPv6 path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 03:29:51 +01:00
{"outbound-if4", required_argument, NULL, 15 },
{"outbound-if6", required_argument, NULL, 16 },
{"config-net", no_argument, NULL, 17 },
{"no-copy-routes", no_argument, NULL, 18 },
{"no-copy-addrs", no_argument, NULL, 19 },
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
{"netns-only", no_argument, NULL, 20 },
{"map-host-loopback", required_argument, NULL, 21 },
{"map-guest-addr", required_argument, NULL, 22 },
{"host-lo-to-ns-lo", no_argument, NULL, 23 },
{"dns-host", required_argument, NULL, 24 },
{ 0 },
};
const char *logname = (c->mode == MODE_PASTA) ? "pasta" : "passt";
More deterministic detection of whether argument is a PID, PATH or NAME pasta takes as its only non-option argument either a PID to attach to the namespaces of, a PATH to a network namespace or a NAME of a network namespace (relative to /run/netns). Currently to determine which it is we try all 3 in that order, and if anything goes wrong we move onto the next. This has the potential to cause very confusing failure modes. e.g. if the argument is intended to be a network namespace name, but a (non-namespace) file of the same name exists in the current directory. Make behaviour more predictable by choosing how to treat the argument based only on the argument's contents, not anything else on the system: - If it's a decimal integer treat it as a PID - Otherwise, if it has no '/' characters, treat it as a netns name (ip-netns doesn't allow '/' in netns names) - Otherwise, treat it as a netns path If you want to open a persistent netns in the current directory, you can use './netns'. This also allows us to split the parsing of the PID|PATH|NAME option from the actual opening of the namespaces. In turn that allows us to put the opening of existing namespaces next to the opening of new namespaces in pasta_start_ns. That makes the logical flow easier to follow and will enable later cleanups. Caveats: - The separation of functions mean we will always generate the basename and dirname for the netns_quit system, even when using PID namespaces. This is pointless, since the netns_quit system doesn't work for non persistent namespaces, but is harmless. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-08-26 06:58:37 +02:00
char userns[PATH_MAX] = { 0 }, netns[PATH_MAX] = { 0 };
bool copy_addrs_opt = false, copy_routes_opt = false;
enum fwd_ports_mode fwd_default = FWD_NONE;
bool v4_only = false, v6_only = false;
unsigned dns4_idx = 0, dns6_idx = 0;
struct fqdn *dnss = c->dns_search;
conf, icmp, tcp, udp: Add options to bind to outbound address and interface I didn't notice earlier: libslirp (and slirp4netns) supports binding outbound sockets to specific IPv4 and IPv6 addresses, to force the source addresse selection. If we want to claim feature parity, we should implement that as well. Further, Podman supports specifying outbound interfaces as well, but this is simply done by resolving the primary address for an interface when the network back-end is started. However, since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can actually bind to a specific interface name, which doesn't need to be validated in advance. Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses, and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets to given interfaces. Given that it probably makes little sense to select addresses and routes from interfaces different than the ones given for outbound sockets, also assign those as "template" interfaces, by default, unless explicitly overridden by '-i'. For ICMP and UDP, we call sock_l4() to open outbound sockets, as we already needed to bind to given ports or echo identifiers, and we can bind() a socket only once: there, pass address (if any) and interface (if any) for the existing bind() and setsockopt() calls. For TCP, in general, we wouldn't otherwise bind sockets. Add a specific helper to do that. For UDP outbound sockets, we need to know if the final destination of the socket is a loopback address, before we decide whether it makes sense to bind the socket at all: move the block mangling the address destination before the creation of the socket in the IPv4 path. This was already the case for the IPv6 path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 03:29:51 +01:00
unsigned int ifi4 = 0, ifi6 = 0;
const char *logfile = NULL;
const char *optstring;
size_t logsize = 0;
char *runas = NULL;
long fd_tap_opt;
int name, ret;
uid_t uid;
gid_t gid;
if (c->mode == MODE_PASTA) {
c->no_dhcp_dns = c->no_dhcp_dns_search = 1;
fwd_default = FWD_AUTO;
optstring = "+dqfel:hF:I:p:P:m:a:n:M:g:i:o:D:S:46t:u:T:U:";
} else {
optstring = "+dqfel:hs:F:p:P:m:a:n:M:g:i:o:D:S:461t:u:";
}
c->tcp.fwd_in.mode = c->tcp.fwd_out.mode = FWD_UNSET;
c->udp.fwd_in.mode = c->udp.fwd_out.mode = FWD_UNSET;
memcpy(c->our_tap_mac, MAC_OUR_LAA, ETH_ALEN);
optind = 0;
do {
name = getopt_long(argc, argv, optstring, options, NULL);
switch (name) {
case -1:
case 0:
break;
case 2:
if (c->mode != MODE_PASTA)
die("--userns is for pasta mode only");
ret = snprintf(userns, sizeof(userns), "%s", optarg);
if (ret <= 0 || ret >= (int)sizeof(userns))
die("Invalid userns: %s", optarg);
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
netns_only = 0;
break;
case 3:
if (c->mode != MODE_PASTA)
die("--netns is for pasta mode only");
conf_netns_opt(netns, optarg);
break;
case 4:
if (c->mode != MODE_PASTA)
die("--ns-mac-addr is for pasta mode only");
parse_mac(c->guest_mac, optarg);
break;
case 5:
if (c->mode != MODE_PASTA)
die("--dhcp-dns is for pasta mode only");
c->no_dhcp_dns = 0;
break;
case 6:
if (c->mode == MODE_PASTA)
die("--no-dhcp-dns is for passt mode only");
c->no_dhcp_dns = 1;
break;
case 7:
if (c->mode != MODE_PASTA)
die("--dhcp-search is for pasta mode only");
c->no_dhcp_dns_search = 0;
break;
case 8:
if (c->mode == MODE_PASTA)
die("--no-dhcp-search is for passt mode only");
c->no_dhcp_dns_search = 1;
break;
case 9:
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
if (inet_pton(AF_INET6, optarg, &c->ip6.dns_match) &&
!IN6_IS_ADDR_UNSPECIFIED(&c->ip6.dns_match) &&
!IN6_IS_ADDR_LOOPBACK(&c->ip6.dns_match))
break;
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
if (inet_pton(AF_INET, optarg, &c->ip4.dns_match) &&
!IN4_IS_ADDR_UNSPECIFIED(&c->ip4.dns_match) &&
!IN4_IS_ADDR_BROADCAST(&c->ip4.dns_match) &&
!IN4_IS_ADDR_LOOPBACK(&c->ip4.dns_match))
break;
die("Invalid DNS forwarding address: %s", optarg);
break;
case 10:
if (c->mode != MODE_PASTA)
die("--no-netns-quit is for pasta mode only");
c->no_netns_quit = 1;
break;
case 11:
c->trace = c->debug = 1;
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
c->quiet = 0;
break;
case 12:
runas = optarg;
break;
case 13:
errno = 0;
logsize = strtol(optarg, NULL, 0);
if (logsize < LOGFILE_SIZE_MIN || errno)
die("Invalid --log-size: %s", optarg);
break;
case 14:
FPRINTF(stdout,
c->mode == MODE_PASTA ? "pasta " : "passt ");
FPRINTF(stdout, VERSION_BLOB);
exit(EXIT_SUCCESS);
conf, icmp, tcp, udp: Add options to bind to outbound address and interface I didn't notice earlier: libslirp (and slirp4netns) supports binding outbound sockets to specific IPv4 and IPv6 addresses, to force the source addresse selection. If we want to claim feature parity, we should implement that as well. Further, Podman supports specifying outbound interfaces as well, but this is simply done by resolving the primary address for an interface when the network back-end is started. However, since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can actually bind to a specific interface name, which doesn't need to be validated in advance. Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses, and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets to given interfaces. Given that it probably makes little sense to select addresses and routes from interfaces different than the ones given for outbound sockets, also assign those as "template" interfaces, by default, unless explicitly overridden by '-i'. For ICMP and UDP, we call sock_l4() to open outbound sockets, as we already needed to bind to given ports or echo identifiers, and we can bind() a socket only once: there, pass address (if any) and interface (if any) for the existing bind() and setsockopt() calls. For TCP, in general, we wouldn't otherwise bind sockets. Add a specific helper to do that. For UDP outbound sockets, we need to know if the final destination of the socket is a loopback address, before we decide whether it makes sense to bind the socket at all: move the block mangling the address destination before the creation of the socket in the IPv4 path. This was already the case for the IPv6 path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 03:29:51 +01:00
case 15:
ret = snprintf(c->ip4.ifname_out,
sizeof(c->ip4.ifname_out), "%s", optarg);
if (ret <= 0 || ret >= (int)sizeof(c->ip4.ifname_out))
die("Invalid interface name: %s", optarg);
break;
case 16:
ret = snprintf(c->ip6.ifname_out,
sizeof(c->ip6.ifname_out), "%s", optarg);
if (ret <= 0 || ret >= (int)sizeof(c->ip6.ifname_out))
die("Invalid interface name: %s", optarg);
break;
case 17:
if (c->mode != MODE_PASTA)
die("--config-net is for pasta mode only");
c->pasta_conf_ns = 1;
conf, icmp, tcp, udp: Add options to bind to outbound address and interface I didn't notice earlier: libslirp (and slirp4netns) supports binding outbound sockets to specific IPv4 and IPv6 addresses, to force the source addresse selection. If we want to claim feature parity, we should implement that as well. Further, Podman supports specifying outbound interfaces as well, but this is simply done by resolving the primary address for an interface when the network back-end is started. However, since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can actually bind to a specific interface name, which doesn't need to be validated in advance. Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses, and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets to given interfaces. Given that it probably makes little sense to select addresses and routes from interfaces different than the ones given for outbound sockets, also assign those as "template" interfaces, by default, unless explicitly overridden by '-i'. For ICMP and UDP, we call sock_l4() to open outbound sockets, as we already needed to bind to given ports or echo identifiers, and we can bind() a socket only once: there, pass address (if any) and interface (if any) for the existing bind() and setsockopt() calls. For TCP, in general, we wouldn't otherwise bind sockets. Add a specific helper to do that. For UDP outbound sockets, we need to know if the final destination of the socket is a loopback address, before we decide whether it makes sense to bind the socket at all: move the block mangling the address destination before the creation of the socket in the IPv4 path. This was already the case for the IPv6 path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 03:29:51 +01:00
break;
case 18:
if (c->mode != MODE_PASTA)
die("--no-copy-routes is for pasta mode only");
warn("--no-copy-routes will be dropped soon");
c->ip4.no_copy_routes = c->ip6.no_copy_routes = true;
copy_routes_opt = true;
break;
case 19:
if (c->mode != MODE_PASTA)
die("--no-copy-addrs is for pasta mode only");
warn("--no-copy-addrs will be dropped soon");
c->ip4.no_copy_addrs = c->ip6.no_copy_addrs = true;
copy_addrs_opt = true;
break;
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
case 20:
if (c->mode != MODE_PASTA)
die("--netns-only is for pasta mode only");
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
netns_only = 1;
*userns = 0;
break;
case 21:
conf_nat(optarg, &c->ip4.map_host_loopback,
&c->ip6.map_host_loopback, &no_map_gw);
break;
case 22:
conf_nat(optarg, &c->ip4.map_guest_addr,
&c->ip6.map_guest_addr, NULL);
break;
case 23:
if (c->mode != MODE_PASTA)
die("--host-lo-to-ns-lo is for pasta mode only");
c->host_lo_to_ns_lo = 1;
break;
case 24:
if (inet_pton(AF_INET6, optarg, &c->ip6.dns_host) &&
!IN6_IS_ADDR_UNSPECIFIED(&c->ip6.dns_host))
break;
if (inet_pton(AF_INET, optarg, &c->ip4.dns_host) &&
!IN4_IS_ADDR_UNSPECIFIED(&c->ip4.dns_host) &&
!IN4_IS_ADDR_BROADCAST(&c->ip4.dns_host))
break;
die("Invalid host nameserver address: %s", optarg);
break;
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
case 'd':
c->debug = 1;
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
c->quiet = 0;
break;
case 'e':
conf, passt: Make --stderr do nothing, and deprecate it The original behaviour of printing messages to standard error by default when running from a non-interactive terminal was introduced because the first KubeVirt integration draft used to start passt in foreground and get messages via standard error. For development purposes, the system logger was more convenient at that point, and passt was running from interactive terminals only if not started by the KubeVirt integration. This behaviour was introduced by 84a62b79a2bc ("passt: Also log to stderr, don't fork to background if not interactive"). Later, I added command-line options in 1e49d194d017 ("passt, pasta: Introduce command-line options and port re-mapping") and accidentally reversed this condition, which wasn't a problem as --stderr could force printing to standard error anyway (and it was used by KubeVirt). Nowadays, the KubeVirt integration uses a log file (requested via libvirt configuration), and the same applies for Podman if one actually needs to look at runtime logs. There are no use cases left, as far as I know, where passt runs in foreground in non-interactive terminals. Seize the chance to reintroduce some sanity here. If we fork to background, standard error is closed, so --stderr is useless in that case. If we run in foreground, there's no harm in printing messages to standard error, and that accidentally became the default behaviour anyway, so --stderr is not needed in that case. It would be needed for non-interactive terminals, but there are no use cases, and if there were, let's log to standard error anyway: the user can always redirect standard error to /dev/null if needed. Before we're up and running, we need to print to standard error anyway if something happens, otherwise we can't report failure to start in any kind of usage, stand-alone or in integrations. So, make --stderr do nothing, and deprecate it. While at it, drop a left-over comment about --foreground being the default only for interactive terminals, because it's not the case anymore. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2024-06-19 20:10:10 +02:00
warn("--stderr will be dropped soon");
break;
case 'l':
logfile = optarg;
break;
case 'q':
c->quiet = 1;
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
c->debug = c->trace = 0;
break;
case 'f':
c->foreground = 1;
break;
case 's':
ret = snprintf(c->sock_path, sizeof(c->sock_path), "%s",
optarg);
if (ret <= 0 || ret >= (int)sizeof(c->sock_path))
die("Invalid socket path: %s", optarg);
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
c->fd_tap = -1;
break;
case 'F':
errno = 0;
fd_tap_opt = strtol(optarg, NULL, 0);
if (errno ||
fd_tap_opt <= STDERR_FILENO || fd_tap_opt > INT_MAX)
die("Invalid --fd: %s", optarg);
c->fd_tap = fd_tap_opt;
c->one_off = true;
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
*c->sock_path = 0;
break;
case 'I':
ret = snprintf(c->pasta_ifn, IFNAMSIZ, "%s",
optarg);
if (ret <= 0 || ret >= IFNAMSIZ)
die("Invalid interface name: %s", optarg);
break;
case 'p':
ret = snprintf(c->pcap, sizeof(c->pcap), "%s", optarg);
if (ret <= 0 || ret >= (int)sizeof(c->pcap))
die("Invalid pcap path: %s", optarg);
break;
case 'P':
ret = snprintf(c->pidfile, sizeof(c->pidfile), "%s",
optarg);
if (ret <= 0 || ret >= (int)sizeof(c->pidfile))
die("Invalid PID file: %s", optarg);
break;
case 'm':
errno = 0;
c->mtu = strtol(optarg, NULL, 0);
if (!c->mtu) {
c->mtu = -1;
break;
}
if (c->mtu < ETH_MIN_MTU || c->mtu > (int)ETH_MAX_MTU ||
errno)
die("Invalid MTU: %s", optarg);
break;
case 'a':
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
if (inet_pton(AF_INET6, optarg, &c->ip6.addr) &&
!IN6_IS_ADDR_UNSPECIFIED(&c->ip6.addr) &&
!IN6_IS_ADDR_LOOPBACK(&c->ip6.addr) &&
!IN6_IS_ADDR_V4MAPPED(&c->ip6.addr) &&
!IN6_IS_ADDR_V4COMPAT(&c->ip6.addr) &&
!IN6_IS_ADDR_MULTICAST(&c->ip6.addr)) {
if (c->mode == MODE_PASTA)
c->ip6.no_copy_addrs = true;
break;
}
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
if (inet_pton(AF_INET, optarg, &c->ip4.addr) &&
!IN4_IS_ADDR_UNSPECIFIED(&c->ip4.addr) &&
!IN4_IS_ADDR_BROADCAST(&c->ip4.addr) &&
!IN4_IS_ADDR_LOOPBACK(&c->ip4.addr) &&
!IN4_IS_ADDR_MULTICAST(&c->ip4.addr)) {
if (c->mode == MODE_PASTA)
c->ip4.no_copy_addrs = true;
break;
}
die("Invalid address: %s", optarg);
break;
case 'n':
c->ip4.prefix_len = conf_ip4_prefix(optarg);
if (c->ip4.prefix_len < 0)
die("Invalid netmask: %s", optarg);
break;
case 'M':
parse_mac(c->our_tap_mac, optarg);
break;
case 'g':
if (inet_pton(AF_INET6, optarg, &c->ip6.guest_gw) &&
!IN6_IS_ADDR_UNSPECIFIED(&c->ip6.guest_gw) &&
!IN6_IS_ADDR_LOOPBACK(&c->ip6.guest_gw)) {
if (c->mode == MODE_PASTA)
c->ip6.no_copy_routes = true;
break;
}
if (inet_pton(AF_INET, optarg, &c->ip4.guest_gw) &&
!IN4_IS_ADDR_UNSPECIFIED(&c->ip4.guest_gw) &&
!IN4_IS_ADDR_BROADCAST(&c->ip4.guest_gw) &&
!IN4_IS_ADDR_LOOPBACK(&c->ip4.guest_gw)) {
if (c->mode == MODE_PASTA)
c->ip4.no_copy_routes = true;
break;
}
die("Invalid gateway address: %s", optarg);
break;
case 'i':
conf, icmp, tcp, udp: Add options to bind to outbound address and interface I didn't notice earlier: libslirp (and slirp4netns) supports binding outbound sockets to specific IPv4 and IPv6 addresses, to force the source addresse selection. If we want to claim feature parity, we should implement that as well. Further, Podman supports specifying outbound interfaces as well, but this is simply done by resolving the primary address for an interface when the network back-end is started. However, since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can actually bind to a specific interface name, which doesn't need to be validated in advance. Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses, and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets to given interfaces. Given that it probably makes little sense to select addresses and routes from interfaces different than the ones given for outbound sockets, also assign those as "template" interfaces, by default, unless explicitly overridden by '-i'. For ICMP and UDP, we call sock_l4() to open outbound sockets, as we already needed to bind to given ports or echo identifiers, and we can bind() a socket only once: there, pass address (if any) and interface (if any) for the existing bind() and setsockopt() calls. For TCP, in general, we wouldn't otherwise bind sockets. Add a specific helper to do that. For UDP outbound sockets, we need to know if the final destination of the socket is a loopback address, before we decide whether it makes sense to bind the socket at all: move the block mangling the address destination before the creation of the socket in the IPv4 path. This was already the case for the IPv6 path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 03:29:51 +01:00
if (!(ifi4 = ifi6 = if_nametoindex(optarg)))
die_perror("Invalid interface name %s", optarg);
break;
conf, icmp, tcp, udp: Add options to bind to outbound address and interface I didn't notice earlier: libslirp (and slirp4netns) supports binding outbound sockets to specific IPv4 and IPv6 addresses, to force the source addresse selection. If we want to claim feature parity, we should implement that as well. Further, Podman supports specifying outbound interfaces as well, but this is simply done by resolving the primary address for an interface when the network back-end is started. However, since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can actually bind to a specific interface name, which doesn't need to be validated in advance. Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses, and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets to given interfaces. Given that it probably makes little sense to select addresses and routes from interfaces different than the ones given for outbound sockets, also assign those as "template" interfaces, by default, unless explicitly overridden by '-i'. For ICMP and UDP, we call sock_l4() to open outbound sockets, as we already needed to bind to given ports or echo identifiers, and we can bind() a socket only once: there, pass address (if any) and interface (if any) for the existing bind() and setsockopt() calls. For TCP, in general, we wouldn't otherwise bind sockets. Add a specific helper to do that. For UDP outbound sockets, we need to know if the final destination of the socket is a loopback address, before we decide whether it makes sense to bind the socket at all: move the block mangling the address destination before the creation of the socket in the IPv4 path. This was already the case for the IPv6 path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 03:29:51 +01:00
case 'o':
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
if (inet_pton(AF_INET6, optarg, &c->ip6.addr_out) &&
conf, icmp, tcp, udp: Add options to bind to outbound address and interface I didn't notice earlier: libslirp (and slirp4netns) supports binding outbound sockets to specific IPv4 and IPv6 addresses, to force the source addresse selection. If we want to claim feature parity, we should implement that as well. Further, Podman supports specifying outbound interfaces as well, but this is simply done by resolving the primary address for an interface when the network back-end is started. However, since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can actually bind to a specific interface name, which doesn't need to be validated in advance. Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses, and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets to given interfaces. Given that it probably makes little sense to select addresses and routes from interfaces different than the ones given for outbound sockets, also assign those as "template" interfaces, by default, unless explicitly overridden by '-i'. For ICMP and UDP, we call sock_l4() to open outbound sockets, as we already needed to bind to given ports or echo identifiers, and we can bind() a socket only once: there, pass address (if any) and interface (if any) for the existing bind() and setsockopt() calls. For TCP, in general, we wouldn't otherwise bind sockets. Add a specific helper to do that. For UDP outbound sockets, we need to know if the final destination of the socket is a loopback address, before we decide whether it makes sense to bind the socket at all: move the block mangling the address destination before the creation of the socket in the IPv4 path. This was already the case for the IPv6 path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 03:29:51 +01:00
!IN6_IS_ADDR_UNSPECIFIED(&c->ip6.addr_out) &&
!IN6_IS_ADDR_LOOPBACK(&c->ip6.addr_out) &&
!IN6_IS_ADDR_V4MAPPED(&c->ip6.addr_out) &&
!IN6_IS_ADDR_V4COMPAT(&c->ip6.addr_out) &&
!IN6_IS_ADDR_MULTICAST(&c->ip6.addr_out))
break;
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
if (inet_pton(AF_INET, optarg, &c->ip4.addr_out) &&
conf, icmp, tcp, udp: Add options to bind to outbound address and interface I didn't notice earlier: libslirp (and slirp4netns) supports binding outbound sockets to specific IPv4 and IPv6 addresses, to force the source addresse selection. If we want to claim feature parity, we should implement that as well. Further, Podman supports specifying outbound interfaces as well, but this is simply done by resolving the primary address for an interface when the network back-end is started. However, since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can actually bind to a specific interface name, which doesn't need to be validated in advance. Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses, and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets to given interfaces. Given that it probably makes little sense to select addresses and routes from interfaces different than the ones given for outbound sockets, also assign those as "template" interfaces, by default, unless explicitly overridden by '-i'. For ICMP and UDP, we call sock_l4() to open outbound sockets, as we already needed to bind to given ports or echo identifiers, and we can bind() a socket only once: there, pass address (if any) and interface (if any) for the existing bind() and setsockopt() calls. For TCP, in general, we wouldn't otherwise bind sockets. Add a specific helper to do that. For UDP outbound sockets, we need to know if the final destination of the socket is a loopback address, before we decide whether it makes sense to bind the socket at all: move the block mangling the address destination before the creation of the socket in the IPv4 path. This was already the case for the IPv6 path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 03:29:51 +01:00
!IN4_IS_ADDR_UNSPECIFIED(&c->ip4.addr_out) &&
!IN4_IS_ADDR_BROADCAST(&c->ip4.addr_out) &&
!IN4_IS_ADDR_MULTICAST(&c->ip4.addr_out))
break;
die("Invalid or redundant outbound address: %s",
optarg);
break;
case 'S':
if (!strcmp(optarg, "none")) {
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
c->no_dns_search = 1;
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
memset(c->dns_search, 0, sizeof(c->dns_search));
break;
}
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
c->no_dns_search = 0;
if (dnss - c->dns_search < ARRAY_SIZE(c->dns_search)) {
ret = snprintf(dnss->n, sizeof(*c->dns_search),
"%s", optarg);
dnss++;
if (ret > 0 &&
ret < (int)sizeof(*c->dns_search))
break;
}
die("Cannot use DNS search domain %s", optarg);
break;
case '4':
v4_only = true;
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
v6_only = false;
break;
case '6':
v6_only = true;
conf: Accept duplicate and conflicting options, the last one wins In multiple occasions, especially when passt(1) and pasta(1) are used in integrations such as the one with Podman, the ability to override earlier options on the command line with later one would have been convenient. Recently, to debug a number of issues happening with Podman, I would have liked to ask users to share a debug log by passing --debug as additional option, but pasta refuses --quiet (always passed by Podman) and --debug at the same time. On top of this, Podman lets users specify other pasta options in its containers.conf(5) file, as well as on the command line. The options from the configuration files are appended together with the ones from the command line, which makes it impossible for users to override options from the configuration file, if duplicated options are refused, unless Podman takes care of sorting them, which is clearly not sustainable. For --debug and --trace, somebody took care of this on Podman side at: https://github.com/containers/common/pull/2052 but this doesn't fix the issue with other options, and we'll have anyway older versions of Podman around, too. I think there's some value in telling users about duplicated or conflicting options, because that might reveal issues in integrations or accidental misconfigurations, but by now I'm fairly convinced that the downsides outweigh this. Drop checks about duplicate options and mutually exclusive ones. In some cases, we need to also undo a couple of initialisations caused by earlier options, but this looks like a simplification, overall. Notable exception: --stderr still conflicts with --log-file, because users might have the expectation that they don't actually conflict. But they do conflict in the existing implementation, so it's safer to make sure that the users notice that. Suggested-by: Paul Holzinger <pholzing@redhat.com> Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Paul Holzinger <pholzing@redhat.com>
2024-06-18 18:04:49 +02:00
v4_only = false;
break;
case '1':
if (c->mode == MODE_PASTA)
die("--one-off is for passt mode only");
c->one_off = true;
break;
case 't':
case 'u':
case 'T':
case 'U':
case 'D':
/* Handle these later, once addresses are configured */
break;
case 'h':
usage(argv[0], stdout, EXIT_SUCCESS);
break;
case '?':
default:
usage(argv[0], stderr, EXIT_FAILURE);
break;
}
} while (name != -1);
if (c->mode == MODE_PASTA && !c->pasta_conf_ns) {
if (copy_routes_opt)
die("--no-copy-routes needs --config-net");
if (copy_addrs_opt)
die("--no-copy-addrs needs --config-net");
}
conf, icmp, tcp, udp: Add options to bind to outbound address and interface I didn't notice earlier: libslirp (and slirp4netns) supports binding outbound sockets to specific IPv4 and IPv6 addresses, to force the source addresse selection. If we want to claim feature parity, we should implement that as well. Further, Podman supports specifying outbound interfaces as well, but this is simply done by resolving the primary address for an interface when the network back-end is started. However, since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can actually bind to a specific interface name, which doesn't need to be validated in advance. Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses, and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets to given interfaces. Given that it probably makes little sense to select addresses and routes from interfaces different than the ones given for outbound sockets, also assign those as "template" interfaces, by default, unless explicitly overridden by '-i'. For ICMP and UDP, we call sock_l4() to open outbound sockets, as we already needed to bind to given ports or echo identifiers, and we can bind() a socket only once: there, pass address (if any) and interface (if any) for the existing bind() and setsockopt() calls. For TCP, in general, we wouldn't otherwise bind sockets. Add a specific helper to do that. For UDP outbound sockets, we need to know if the final destination of the socket is a loopback address, before we decide whether it makes sense to bind the socket at all: move the block mangling the address destination before the creation of the socket in the IPv4 path. This was already the case for the IPv6 path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 03:29:51 +01:00
if (!ifi4 && *c->ip4.ifname_out)
ifi4 = if_nametoindex(c->ip4.ifname_out);
if (!ifi6 && *c->ip6.ifname_out)
ifi6 = if_nametoindex(c->ip6.ifname_out);
conf_ugid(runas, &uid, &gid);
if (logfile)
logfile_init(logname, logfile, logsize);
else
__openlog(logname, 0, LOG_DAEMON);
if (c->debug)
__setlogmask(LOG_UPTO(LOG_DEBUG));
else if (c->quiet)
__setlogmask(LOG_UPTO(LOG_WARNING));
else
__setlogmask(LOG_UPTO(LOG_INFO));
log_conf_parsed = true; /* Stop printing everything */
nl_sock_init(c, false);
if (!v6_only)
c->ifi4 = conf_ip4(ifi4, &c->ip4);
if (!v4_only)
c->ifi6 = conf_ip6(ifi6, &c->ip6);
conf, icmp, tcp, udp: Add options to bind to outbound address and interface I didn't notice earlier: libslirp (and slirp4netns) supports binding outbound sockets to specific IPv4 and IPv6 addresses, to force the source addresse selection. If we want to claim feature parity, we should implement that as well. Further, Podman supports specifying outbound interfaces as well, but this is simply done by resolving the primary address for an interface when the network back-end is started. However, since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can actually bind to a specific interface name, which doesn't need to be validated in advance. Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses, and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets to given interfaces. Given that it probably makes little sense to select addresses and routes from interfaces different than the ones given for outbound sockets, also assign those as "template" interfaces, by default, unless explicitly overridden by '-i'. For ICMP and UDP, we call sock_l4() to open outbound sockets, as we already needed to bind to given ports or echo identifiers, and we can bind() a socket only once: there, pass address (if any) and interface (if any) for the existing bind() and setsockopt() calls. For TCP, in general, we wouldn't otherwise bind sockets. Add a specific helper to do that. For UDP outbound sockets, we need to know if the final destination of the socket is a loopback address, before we decide whether it makes sense to bind the socket at all: move the block mangling the address destination before the creation of the socket in the IPv4 path. This was already the case for the IPv6 path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 03:29:51 +01:00
if ((!c->ifi4 && !c->ifi6) ||
(*c->ip4.ifname_out && !c->ifi4) ||
(*c->ip6.ifname_out && !c->ifi6))
die("External interface not usable");
if (c->ifi4 && !no_map_gw &&
IN4_IS_ADDR_UNSPECIFIED(&c->ip4.map_host_loopback))
c->ip4.map_host_loopback = c->ip4.guest_gw;
if (c->ifi6 && !no_map_gw &&
IN6_IS_ADDR_UNSPECIFIED(&c->ip6.map_host_loopback))
c->ip6.map_host_loopback = c->ip6.guest_gw;
if (c->ifi4 && IN4_IS_ADDR_UNSPECIFIED(&c->ip4.guest_gw))
c->no_dhcp = 1;
/* Inbound port options & DNS can be parsed now (after IPv4/IPv6
* settings)
*/
fwd_probe_ephemeral();
udp_portmap_clear();
optind = 0;
do {
name = getopt_long(argc, argv, optstring, options, NULL);
if (name == 't') {
conf_ports(c, name, optarg, &c->tcp.fwd_in);
} else if (name == 'u') {
conf_ports(c, name, optarg, &c->udp.fwd_in);
} else if (name == 'D') {
struct in6_addr dns6_tmp;
struct in_addr dns4_tmp;
if (!strcmp(optarg, "none")) {
c->no_dns = 1;
dns4_idx = 0;
memset(c->ip4.dns, 0, sizeof(c->ip4.dns));
c->ip4.dns[0] = (struct in_addr){ 0 };
c->ip4.dns_match = (struct in_addr){ 0 };
c->ip4.dns_host = (struct in_addr){ 0 };
dns6_idx = 0;
memset(c->ip6.dns, 0, sizeof(c->ip6.dns));
c->ip6.dns_match = (struct in6_addr){ 0 };
c->ip6.dns_host = (struct in6_addr){ 0 };
continue;
}
c->no_dns = 0;
if (inet_pton(AF_INET, optarg, &dns4_tmp)) {
dns4_idx += add_dns4(c, &dns4_tmp, dns4_idx);
continue;
}
if (inet_pton(AF_INET6, optarg, &dns6_tmp)) {
dns6_idx += add_dns6(c, &dns6_tmp, dns6_idx);
continue;
}
die("Cannot use DNS address %s", optarg);
}
} while (name != -1);
if (c->mode == MODE_PASTA)
conf_pasta_ns(&netns_only, userns, netns, optind, argc, argv);
else if (optind != argc)
die("Extra non-option argument: %s", argv[optind]);
conf_open_files(c); /* Before any possible setuid() / setgid() */
isolate_user(uid, gid, !netns_only, userns, c->mode);
Handle userns isolation and dropping root at the same time passt/pasta can interact with user namespaces in a number of ways: 1) With --netns-only we'll remain in our original user namespace 2) With --userns or a PID option to pasta we'll join either the given user namespace or that of the PID 3) When pasta spawns a shell or command we'll start a new user namespace for the command and then join it 4) With passt we'll create a new user namespace when we sandbox() ourself However (3) and (4) turn out to have essentially the same effect. In both cases we create one new user namespace. The spawned command starts there, and passt/pasta itself will live there from sandbox() onwards. Because of this, we can simplify user namespace handling by moving the userns handling earlier, to the same point we drop root in the original namespace. Extend the drop_user() function to isolate_user() which does both. After switching UID and GID in the original userns, isolate_user() will either join or create the userns we require. When we spawn a command with pasta_start_ns()/pasta_setup_ns() we no longer need to create a userns, because we're already made one. sandbox() likewise no longer needs to create (or join) an userns because we're already in the one we need. We no longer need c->pasta_userns_fd, since the fd is only used locally in isolate_user(). Likewise we can replace c->netns_only with a local in conf(), since it's not used outside there. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-09-12 14:24:07 +02:00
if (c->pasta_conf_ns)
c->no_ra = 1;
More deterministic detection of whether argument is a PID, PATH or NAME pasta takes as its only non-option argument either a PID to attach to the namespaces of, a PATH to a network namespace or a NAME of a network namespace (relative to /run/netns). Currently to determine which it is we try all 3 in that order, and if anything goes wrong we move onto the next. This has the potential to cause very confusing failure modes. e.g. if the argument is intended to be a network namespace name, but a (non-namespace) file of the same name exists in the current directory. Make behaviour more predictable by choosing how to treat the argument based only on the argument's contents, not anything else on the system: - If it's a decimal integer treat it as a PID - Otherwise, if it has no '/' characters, treat it as a netns name (ip-netns doesn't allow '/' in netns names) - Otherwise, treat it as a netns path If you want to open a persistent netns in the current directory, you can use './netns'. This also allows us to split the parsing of the PID|PATH|NAME option from the actual opening of the namespaces. In turn that allows us to put the opening of existing namespaces next to the opening of new namespaces in pasta_start_ns. That makes the logical flow easier to follow and will enable later cleanups. Caveats: - The separation of functions mean we will always generate the basename and dirname for the netns_quit system, even when using PID namespaces. This is pointless, since the netns_quit system doesn't work for non persistent namespaces, but is harmless. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-08-26 06:58:37 +02:00
if (c->mode == MODE_PASTA) {
if (*netns) {
Handle userns isolation and dropping root at the same time passt/pasta can interact with user namespaces in a number of ways: 1) With --netns-only we'll remain in our original user namespace 2) With --userns or a PID option to pasta we'll join either the given user namespace or that of the PID 3) When pasta spawns a shell or command we'll start a new user namespace for the command and then join it 4) With passt we'll create a new user namespace when we sandbox() ourself However (3) and (4) turn out to have essentially the same effect. In both cases we create one new user namespace. The spawned command starts there, and passt/pasta itself will live there from sandbox() onwards. Because of this, we can simplify user namespace handling by moving the userns handling earlier, to the same point we drop root in the original namespace. Extend the drop_user() function to isolate_user() which does both. After switching UID and GID in the original userns, isolate_user() will either join or create the userns we require. When we spawn a command with pasta_start_ns()/pasta_setup_ns() we no longer need to create a userns, because we're already made one. sandbox() likewise no longer needs to create (or join) an userns because we're already in the one we need. We no longer need c->pasta_userns_fd, since the fd is only used locally in isolate_user(). Likewise we can replace c->netns_only with a local in conf(), since it's not used outside there. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-09-12 14:24:07 +02:00
pasta_open_ns(c, netns);
More deterministic detection of whether argument is a PID, PATH or NAME pasta takes as its only non-option argument either a PID to attach to the namespaces of, a PATH to a network namespace or a NAME of a network namespace (relative to /run/netns). Currently to determine which it is we try all 3 in that order, and if anything goes wrong we move onto the next. This has the potential to cause very confusing failure modes. e.g. if the argument is intended to be a network namespace name, but a (non-namespace) file of the same name exists in the current directory. Make behaviour more predictable by choosing how to treat the argument based only on the argument's contents, not anything else on the system: - If it's a decimal integer treat it as a PID - Otherwise, if it has no '/' characters, treat it as a netns name (ip-netns doesn't allow '/' in netns names) - Otherwise, treat it as a netns path If you want to open a persistent netns in the current directory, you can use './netns'. This also allows us to split the parsing of the PID|PATH|NAME option from the actual opening of the namespaces. In turn that allows us to put the opening of existing namespaces next to the opening of new namespaces in pasta_start_ns. That makes the logical flow easier to follow and will enable later cleanups. Caveats: - The separation of functions mean we will always generate the basename and dirname for the netns_quit system, even when using PID namespaces. This is pointless, since the netns_quit system doesn't work for non persistent namespaces, but is harmless. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-08-26 06:58:37 +02:00
} else {
isolation: Only configure UID/GID mappings in userns when spawning shell When in passt mode, or pasta mode spawning a command, we create a userns for ourselves. This is used both to isolate the pasta/passt process itself and to run the spawned command, if any. Since eed17a47 "Handle userns isolation and dropping root at the same time" we've handled both cases the same, configuring the UID and GID mappings in the new userns to map whichever UID we're running as to root within the userns. This mapping is desirable when spawning a shell or other command, so that the user gets a root shell with reasonably clear abilities within the userns and netns. It's not necessarily essential, though. When not spawning a shell, it doesn't really have any purpose: passt itself doesn't need to be root and can operate fine with an unmapped user (using some of the capabilities we get when entering the userns instead). Configuring the uid_map can cause problems if passt is running with any capabilities in the initial namespace, such as CAP_NET_BIND_SERVICE to allow it to forward low ports. In this case the kernel makes files in /proc/pid owned by root rather than the starting user to prevent the user from interfering with the operation of the capability-enhanced process. This includes uid_map meaning we are not able to write to it. Whether this behaviour is correct in the kernel is debatable, but in any case we might as well avoid problems by only initializing the user mappings when we really want them. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-10-14 06:25:36 +02:00
pasta_start_ns(c, uid, gid,
argc - optind, argv + optind);
More deterministic detection of whether argument is a PID, PATH or NAME pasta takes as its only non-option argument either a PID to attach to the namespaces of, a PATH to a network namespace or a NAME of a network namespace (relative to /run/netns). Currently to determine which it is we try all 3 in that order, and if anything goes wrong we move onto the next. This has the potential to cause very confusing failure modes. e.g. if the argument is intended to be a network namespace name, but a (non-namespace) file of the same name exists in the current directory. Make behaviour more predictable by choosing how to treat the argument based only on the argument's contents, not anything else on the system: - If it's a decimal integer treat it as a PID - Otherwise, if it has no '/' characters, treat it as a netns name (ip-netns doesn't allow '/' in netns names) - Otherwise, treat it as a netns path If you want to open a persistent netns in the current directory, you can use './netns'. This also allows us to split the parsing of the PID|PATH|NAME option from the actual opening of the namespaces. In turn that allows us to put the opening of existing namespaces next to the opening of new namespaces in pasta_start_ns. That makes the logical flow easier to follow and will enable later cleanups. Caveats: - The separation of functions mean we will always generate the basename and dirname for the netns_quit system, even when using PID namespaces. This is pointless, since the netns_quit system doesn't work for non persistent namespaces, but is harmless. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-08-26 06:58:37 +02:00
}
}
if (c->mode == MODE_PASTA)
nl_sock_init(c, true);
/* ...and outbound port options now that namespaces are set up. */
optind = 0;
do {
name = getopt_long(argc, argv, optstring, options, NULL);
if (name == 'T')
conf_ports(c, name, optarg, &c->tcp.fwd_out);
else if (name == 'U')
conf_ports(c, name, optarg, &c->udp.fwd_out);
} while (name != -1);
if (!c->ifi4)
c->no_dhcp = 1;
if (!c->ifi6) {
c->no_ndp = 1;
c->no_dhcpv6 = 1;
}
if (!c->mtu)
c->mtu = ROUND_DOWN(ETH_MAX_MTU - ETH_HLEN, sizeof(uint32_t));
get_dns(c);
if (!*c->pasta_ifn) {
if (c->ifi4)
if_indextoname(c->ifi4, c->pasta_ifn);
else
if_indextoname(c->ifi6, c->pasta_ifn);
}
if (!c->tcp.fwd_in.mode)
c->tcp.fwd_in.mode = fwd_default;
if (!c->tcp.fwd_out.mode)
c->tcp.fwd_out.mode = fwd_default;
if (!c->udp.fwd_in.mode)
c->udp.fwd_in.mode = fwd_default;
if (!c->udp.fwd_out.mode)
c->udp.fwd_out.mode = fwd_default;
fwd_scan_ports_init(c);
if (!c->quiet)
conf_print(c);
}