passt/tcp.c

3224 lines
87 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
/* PASST - Plug A Simple Socket Transport
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* for qemu/UNIX domain socket mode
*
* PASTA - Pack A Subtle Tap Abstraction
* for network namespace/tap device mode
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*
* tcp.c - TCP L2-L4 translation state machine
*
* Copyright (c) 2020-2022 Red Hat GmbH
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* Author: Stefano Brivio <sbrivio@redhat.com>
*/
/**
* DOC: Theory of Operation
*
*
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* PASST mode
* ==========
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*
* This implementation maps TCP traffic between a single L2 interface (tap) and
* native TCP (L4) sockets, mimicking and reproducing as closely as possible the
* inferred behaviour of applications running on a guest, connected via said L2
* interface. Four connection flows are supported:
* - from the local host to the guest behind the tap interface:
* - this is the main use case for proxies in service meshes
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* - we bind to configured local ports, and relay traffic between L4 sockets
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* with local endpoints and the L2 interface
* - from remote hosts to the guest behind the tap interface:
* - this might be needed for services that need to be addressed directly,
* and typically configured with special port forwarding rules (which are
* not needed here)
* - we also relay traffic between L4 sockets with remote endpoints and the L2
* interface
* - from the guest to the local host:
* - this is not observed in practice, but implemented for completeness and
* transparency
* - from the guest to external hosts:
* - this might be needed for applications running on the guest that need to
* directly access internet services (e.g. NTP)
*
* Relevant goals are:
* - transparency: sockets need to behave as if guest applications were running
* directly on the host. This is achieved by:
* - avoiding port and address translations whenever possible
* - mirroring TCP dynamics by observation of socket parameters (TCP_INFO
* socket option) and TCP headers of packets coming from the tap interface,
tcp: Don't use TCP_WINDOW_CLAMP On the L2 tap side, we see TCP headers and know the TCP window that the ultimate receiver is advertising. In order to avoid unnecessary buffering within passt/pasta (or by the kernel on passt/pasta's behalf) we attempt to advertise that window back to the original sock-side sender using TCP_WINDOW_CLAMP. However, TCP_WINDOW_CLAMP just doesn't work like this. Prior to kernel commit 3aa7857fe1d7 ("tcp: enable mid stream window clamp"), it simply had no effect on established sockets. After that commit, it does affect established sockets but doesn't behave the way we need: * It appears to be designed only to shrink the window, not to allow it to re-expand. * More importantly, that commit has a serious bug where if the setsockopt() is made when the existing kernel advertised window for the socket happens to be zero, it will now become locked at zero, stopping any further data from being received on the socket. Since this has never worked as intended, simply remove it. It might be possible to re-implement the intended behaviour by manipulating SO_RCVBUF, so we leave a comment to that effect. This kernel bug is the underlying cause of both the linked passt bug and the linked podman bug. We attempted to fix this before with passt commit d3192f67 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag"). However while that commit masked the bug for some cases, it didn't really address the problem. Fixes: d3192f67c492 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag") Link: https://github.com/containers/podman/issues/20170 Link: https://bugs.passt.top/show_bug.cgi?id=74 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-09 10:54:00 +01:00
* reapplying those parameters in both flow directions (including TCP_MSS
* socket option)
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* - simplicity: only a small subset of TCP logic is implemented here and
* delegated as much as possible to the TCP implementations of guest and host
* kernel. This is achieved by:
* - avoiding a complete TCP stack reimplementation, with a modified TCP state
* machine focused on the translation of observed events instead
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* - mirroring TCP dynamics as described above and hence avoiding the need for
* segmentation, explicit queueing, and reassembly of segments
* - security:
* - no dynamic memory allocation is performed
* - TODO: synflood protection
*
* Portability is limited by usage of Linux-specific socket options.
*
*
* Limits
* ------
*
* To avoid the need for dynamic memory allocation, a maximum, reasonable amount
* of connections is defined by TCP_MAX_CONNS (currently 128k).
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
*
* Data needs to linger on sockets as long as it's not acknowledged by the
* guest, and is read using MSG_PEEK into preallocated static buffers sized
* to the maximum supported window, 16 MiB ("discard" buffer, for already-sent
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
* data) plus a number of maximum-MSS-sized buffers. This imposes a practical
* limitation on window scaling, that is, the maximum factor is 256. Larger
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
* factors will be accepted, but resulting, larger values are never advertised
* to the other side, and not used while queueing data.
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*
*
* Ports
* -----
*
* To avoid the need for ad-hoc configuration of port forwarding or allowed
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* ports, listening sockets can be opened and bound to all unbound ports on the
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* host, as far as process capabilities allow. This service needs to be started
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* after any application proxy that needs to bind to local ports. Mapped ports
* can also be configured explicitly.
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*
* No port translation is needed for connections initiated remotely or by the
* local host: source port from socket is reused while establishing connections
* to the guest.
*
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* For connections initiated by the guest, it's not possible to force the same
* source port as connections are established by the host kernel: that's the
* only port translation needed.
*
*
* Connection tracking and storage
* -------------------------------
*
* Connections are tracked by struct tcp_tap_conn entries in the @tc
* array, containing addresses, ports, TCP states and parameters. This
* is statically allocated and indexed by an arbitrary connection
* number. The array is compacted whenever a connection is closed, by
* remapping the highest connection index in use to the one freed up.
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
*
* References used for the epoll interface report the connection index used for
* the @tc array.
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*
* IPv4 addresses are stored as IPv4-mapped IPv6 addresses to avoid the need for
* separate data structures depending on the protocol version.
*
* - Inbound connection requests (to the guest) are mapped using the triple
* < source IP address, source port, destination port >
* - Outbound connection requests (from the guest) are mapped using the triple
* < destination IP address, destination port, source port >
* where the source port is the one used by the guest, not the one used by the
* corresponding host socket
*
*
* Initialisation
* --------------
*
* Up to 2^15 + 2^14 listening sockets (excluding ephemeral ports, repeated for
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* IPv4 and IPv6) can be opened and bound to wildcard addresses. Some will fail
* to bind (for low ports, or ports already bound, e.g. by a proxy). These are
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* added to the epoll list, with no separate storage.
*
*
* Events and states
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* -----------------
*
* Instead of tracking connection states using a state machine, connection
* events are used to determine state and actions for a given connection. This
* makes the implementation simpler as most of the relevant tasks deal with
* reactions to events, rather than state-associated actions. For user
* convenience, approximate states are mapped in logs from events by
* @tcp_state_str.
*
* The events are:
*
* - SOCK_ACCEPTED connection accepted from socket, SYN sent to tap/guest
*
* - TAP_SYN_RCVD tap/guest initiated connection, SYN received
*
* - TAP_SYN_ACK_SENT SYN, ACK sent to tap/guest, valid for TAP_SYN_RCVD only
*
* - ESTABLISHED connection established, the following events are valid:
*
* - SOCK_FIN_RCVD FIN (EPOLLRDHUP) received from socket
*
* - SOCK_FIN_SENT FIN (write shutdown) sent to socket
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*
* - TAP_FIN_RCVD FIN received from tap/guest
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*
* - TAP_FIN_SENT FIN sent to tap/guest
*
* - TAP_FIN_ACKED ACK to FIN seen from tap/guest
*
* Setting any event in CONN_STATE_BITS (SOCK_ACCEPTED, TAP_SYN_RCVD,
* ESTABLISHED) clears all the other events, as those represent the fundamental
* connection states. No events (events == CLOSED) means the connection is
* closed.
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*
* Connection setup
* ----------------
*
* - inbound connection (from socket to guest): on accept() from listening
* socket, the new socket is mapped in connection tracking table, and
* three-way handshake initiated towards the guest, advertising MSS and window
* size and scaling from socket parameters
* - outbound connection (from guest to socket): on SYN segment from guest, a
* new socket is created and mapped in connection tracking table, setting
* MSS and window clamping from header and option of the observed SYN segment
*
*
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* Aging and timeout
* -----------------
*
* Timeouts are implemented by means of timerfd timers, set based on flags:
*
* - SYN_TIMEOUT: if no ACK is received from tap/guest during handshake (flag
* ACK_FROM_TAP_DUE without ESTABLISHED event) within this time, reset the
* connection
*
* - ACK_TIMEOUT: if no ACK segment was received from tap/guest, after sending
* data (flag ACK_FROM_TAP_DUE with ESTABLISHED event), re-send data from the
* socket and reset sequence to what was acknowledged. If this persists for
* more than TCP_MAX_RETRANS times in a row, reset the connection
*
* - FIN_TIMEOUT: if a FIN segment was sent to tap/guest (flag ACK_FROM_TAP_DUE
* with TAP_FIN_SENT event), and no ACK is received within this time, reset
* the connection
*
* - FIN_TIMEOUT: if a FIN segment was acknowledged by tap/guest and a FIN
* segment (write shutdown) was sent via socket (events SOCK_FIN_SENT and
* TAP_FIN_ACKED), but no socket activity is detected from the socket within
* this time, reset the connection
*
* - ACT_TIMEOUT, in the presence of any event: if no activity is detected on
* either side, the connection is reset
*
* - ACK_INTERVAL elapsed after data segment received from tap without having
* sent an ACK segment, or zero-sized window advertised to tap/guest (flag
* ACK_TO_TAP_DUE): forcibly check if an ACK segment can be sent
*
*
* Summary of data flows (with ESTABLISHED event)
* ----------------------------------------------
*
* @seq_to_tap: next sequence for packets to tap/guest
* @seq_ack_from_tap: last ACK number received from tap/guest
* @seq_from_tap: next sequence for packets from tap/guest (expected)
* @seq_ack_to_tap: last ACK number sent to tap/guest
*
* @seq_init_from_tap: initial sequence number from tap/guest
* @seq_init_to_tap: initial sequence number from tap/guest
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*
* @wnd_from_tap: last window size received from tap, never scaled
* @wnd_from_tap: last window size advertised from tap, never scaled
*
* - from socket to tap/guest:
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* - on new data from socket:
* - peek into buffer
* - send data to tap/guest:
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* - starting at offset (@seq_to_tap - @seq_ack_from_tap)
* - in MSS-sized segments
* - increasing @seq_to_tap at each segment
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
* - up to window (until @seq_to_tap - @seq_ack_from_tap <= @wnd_from_tap)
* - on read error, send RST to tap/guest, close socket
* - on zero read, send FIN to tap/guest, set TAP_FIN_SENT
* - on ACK from tap/guest:
* - set @ts_ack_from_tap
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* - check if it's the second duplicated ACK
* - consume buffer by difference between new ack_seq and @seq_ack_from_tap
* - update @seq_ack_from_tap from ack_seq in header
* - on two duplicated ACKs, reset @seq_to_tap to @seq_ack_from_tap, and
* resend with steps listed above
*
* - from tap/guest to socket:
* - on packet from tap/guest:
* - set @ts_tap_act
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* - check seq from header against @seq_from_tap, if data is missing, send
* two ACKs with number @seq_ack_to_tap, discard packet
* - otherwise queue data to socket, set @seq_from_tap to seq from header
* plus payload length
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
* - in ESTABLISHED state, send ACK to tap as soon as we queue to the
* socket. In other states, query socket for TCP_INFO, set
* @seq_ack_to_tap to (tcpi_bytes_acked + @seq_init_from_tap) % 2^32 and
* send ACK to tap/guest
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
*
*
* PASTA mode
* ==========
*
* For traffic directed to TCP ports configured for mapping to the tuntap device
* in the namespace, and for non-local traffic coming from the tuntap device,
* the implementation is identical as the PASST mode described in the previous
* section.
*
* For local traffic directed to TCP ports configured for direct mapping between
* namespaces, see the implementation in tcp_splice.c.
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*/
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
#include <sched.h>
#include <fcntl.h>
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
#include <stdlib.h>
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
#include <errno.h>
#include <limits.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <netinet/in.h>
#include <netinet/ip.h>
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
#include <stdint.h>
#include <stdbool.h>
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
#include <stddef.h>
#include <string.h>
#include <sys/epoll.h>
#include <sys/socket.h>
#include <sys/timerfd.h>
#include <sys/types.h>
#include <sys/uio.h>
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
#include <time.h>
#include <linux/tcp.h> /* For struct tcp_info */
#include "checksum.h"
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
#include "util.h"
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
#include "passt.h"
#include "tap.h"
#include "siphash.h"
#include "pcap.h"
#include "tcp_splice.h"
#include "log.h"
#include "inany.h"
#include "flow.h"
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
#include "tcp_conn.h"
#include "flow_table.h"
/* Sides of a flow as we use them in "tap" connections */
#define SOCKSIDE 0
#define TAPSIDE 1
#define TCP_FRAMES_MEM 128
#define TCP_FRAMES \
(c->mode == MODE_PASST ? TCP_FRAMES_MEM : 1)
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
#define TCP_HASH_TABLE_LOAD 70 /* % */
#define TCP_HASH_TABLE_SIZE (FLOW_MAX * 100 / TCP_HASH_TABLE_LOAD)
#define MAX_WS 8
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
#define MAX_WINDOW (1 << (16 + (MAX_WS)))
/* MSS rounding: see SET_MSS() */
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
#define MSS_DEFAULT 536
struct tcp4_l2_head { /* For MSS4 macro: keep in sync with tcp4_l2_buf_t */
#ifdef __AVX2__
uint8_t pad[26];
#else
uint8_t pad[2];
#endif
struct tap_hdr taph;
struct iphdr iph;
struct tcphdr th;
#ifdef __AVX2__
} __attribute__ ((packed, aligned(32)));
#else
} __attribute__ ((packed, aligned(__alignof__(unsigned int))));
#endif
struct tcp6_l2_head { /* For MSS6 macro: keep in sync with tcp6_l2_buf_t */
#ifdef __AVX2__
uint8_t pad[14];
#else
uint8_t pad[2];
#endif
struct tap_hdr taph;
struct ipv6hdr ip6h;
struct tcphdr th;
#ifdef __AVX2__
} __attribute__ ((packed, aligned(32)));
#else
} __attribute__ ((packed, aligned(__alignof__(unsigned int))));
#endif
#define MSS4 ROUND_DOWN(USHRT_MAX - sizeof(struct tcp4_l2_head), 4)
#define MSS6 ROUND_DOWN(USHRT_MAX - sizeof(struct tcp6_l2_head), 4)
#define WINDOW_DEFAULT 14600 /* RFC 6928 */
#ifdef HAS_SND_WND
# define KERNEL_REPORTS_SND_WND(c) (c->tcp.kernel_snd_wnd)
#else
# define KERNEL_REPORTS_SND_WND(c) (0 && (c))
#endif
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
tcp: Don't reset ACK_TO_TAP_DUE on any ACK, reschedule timer as needed This is mostly symmetric with commit cc6d8286d104 ("tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer"): we shouldn't reset the ACK_TO_TAP_DUE flag on any inbound ACK segment, but only once we acknowledge everything we received from the guest or the container. If we don't, a client might unnecessarily hold off further data, especially during slow start, and in general we won't converge to the usable bandwidth. This is very visible especially with traffic tests on links with non-negligible latency, such as in the reported issue. There, a public iperf3 server sometimes aborts the test due do what appears to be a low iperf3's --rcv-timeout (probably less than a second). Even if this doesn't happen, the throughput will converge to a fraction of the usable bandwidth. Clear ACK_TO_TAP_DUE if we acknowledged everything, set it if we didn't, and reschedule the timer in case the flag is still set as the timer expires. While at it, decrease the ACK timer interval to 10ms. A 50ms interval is short enough for any bandwidth-delay product I had in mind (local connections, or non-local connections with limited bandwidth), but here I am, testing 1gbps transfers to a peer with 100ms RTT. Indeed, we could eventually make the timer interval dependent on the current window and estimated bandwidth-delay product, but at least for the moment being, 10ms should be long enough to avoid any measurable syscall overhead, yet usable for any real-world application. Reported-by: Lukas Mrtvy <lukas.mrtvy@gmail.com> Link: https://bugs.passt.top/show_bug.cgi?id=44 Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-03-21 23:14:58 +01:00
#define ACK_INTERVAL 10 /* ms */
#define SYN_TIMEOUT 10 /* s */
#define ACK_TIMEOUT 2
#define FIN_TIMEOUT 60
#define ACT_TIMEOUT 7200
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
#define LOW_RTT_TABLE_SIZE 8
#define LOW_RTT_THRESHOLD 10 /* us */
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
/* We need to include <linux/tcp.h> for tcpi_bytes_acked, instead of
* <netinet/tcp.h>, but that doesn't include a definition for SOL_TCP
*/
#define SOL_TCP IPPROTO_TCP
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
#define SEQ_LE(a, b) ((b) - (a) < MAX_WINDOW)
#define SEQ_LT(a, b) ((b) - (a) - 1 < MAX_WINDOW)
#define SEQ_GE(a, b) ((a) - (b) < MAX_WINDOW)
#define SEQ_GT(a, b) ((a) - (b) - 1 < MAX_WINDOW)
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
#define FIN (1 << 0)
#define SYN (1 << 1)
#define RST (1 << 2)
#define ACK (1 << 4)
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
/* Flags for internal usage */
#define DUP_ACK (1 << 5)
#define ACK_IF_NEEDED 0 /* See tcp_send_flag() */
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
#define OPT_EOL 0
#define OPT_NOP 1
#define OPT_MSS 2
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 11:33:38 +01:00
#define OPT_MSS_LEN 4
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
#define OPT_WS 3
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 11:33:38 +01:00
#define OPT_WS_LEN 3
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
#define OPT_SACKP 4
#define OPT_SACK 5
#define OPT_TS 8
#define CONN_V4(conn) (!!inany_v4(&(conn)->faddr))
#define CONN_V6(conn) (!CONN_V4(conn))
#define CONN_IS_CLOSING(conn) \
((conn->events & ESTABLISHED) && \
(conn->events & (SOCK_FIN_RCVD | TAP_FIN_RCVD)))
#define CONN_HAS(conn, set) ((conn->events & (set)) == (set))
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
static const char *tcp_event_str[] __attribute((__unused__)) = {
"SOCK_ACCEPTED", "TAP_SYN_RCVD", "ESTABLISHED", "TAP_SYN_ACK_SENT",
"SOCK_FIN_RCVD", "SOCK_FIN_SENT", "TAP_FIN_RCVD", "TAP_FIN_SENT",
"TAP_FIN_ACKED",
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
};
static const char *tcp_state_str[] __attribute((__unused__)) = {
"SYN_RCVD", "SYN_SENT", "ESTABLISHED",
"SYN_RCVD", /* approximately maps to TAP_SYN_ACK_SENT */
/* Passive close: */
"CLOSE_WAIT", "CLOSE_WAIT", "LAST_ACK", "LAST_ACK", "LAST_ACK",
/* Active close (+5): */
"CLOSING", "FIN_WAIT_1", "FIN_WAIT_1", "FIN_WAIT_2", "TIME_WAIT",
};
static const char *tcp_flag_str[] __attribute((__unused__)) = {
tcp: Don't use TCP_WINDOW_CLAMP On the L2 tap side, we see TCP headers and know the TCP window that the ultimate receiver is advertising. In order to avoid unnecessary buffering within passt/pasta (or by the kernel on passt/pasta's behalf) we attempt to advertise that window back to the original sock-side sender using TCP_WINDOW_CLAMP. However, TCP_WINDOW_CLAMP just doesn't work like this. Prior to kernel commit 3aa7857fe1d7 ("tcp: enable mid stream window clamp"), it simply had no effect on established sockets. After that commit, it does affect established sockets but doesn't behave the way we need: * It appears to be designed only to shrink the window, not to allow it to re-expand. * More importantly, that commit has a serious bug where if the setsockopt() is made when the existing kernel advertised window for the socket happens to be zero, it will now become locked at zero, stopping any further data from being received on the socket. Since this has never worked as intended, simply remove it. It might be possible to re-implement the intended behaviour by manipulating SO_RCVBUF, so we leave a comment to that effect. This kernel bug is the underlying cause of both the linked passt bug and the linked podman bug. We attempted to fix this before with passt commit d3192f67 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag"). However while that commit masked the bug for some cases, it didn't really address the problem. Fixes: d3192f67c492 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag") Link: https://github.com/containers/podman/issues/20170 Link: https://bugs.passt.top/show_bug.cgi?id=74 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-09 10:54:00 +01:00
"STALLED", "LOCAL", "ACTIVE_CLOSE", "ACK_TO_TAP_DUE",
"ACK_FROM_TAP_DUE",
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
};
/* Listening sockets, used for automatic port forwarding in pasta mode only */
static int tcp_sock_init_ext [NUM_PORTS][IP_VERSIONS];
static int tcp_sock_ns [NUM_PORTS][IP_VERSIONS];
/* Table of guest side forwarding addresses with very low RTT (assumed
* to be local to the host), LRU
*/
static union inany_addr low_rtt_dst[LOW_RTT_TABLE_SIZE];
/**
* tcp_buf_seq_update - Sequences to update with length of frames once sent
* @seq: Pointer to sequence number sent to tap-side, to be updated
* @len: TCP payload length
*/
struct tcp_buf_seq_update {
uint32_t *seq;
uint16_t len;
};
/* Static buffers */
/**
* tcp4_l2_buf_t - Pre-cooked IPv4 packet buffers for tap connections
* @pad: Align TCP header to 32 bytes, for AVX2 checksum calculation only
* @taph: Tap-level headers (partially pre-filled)
* @iph: Pre-filled IP header (except for tot_len and saddr)
* @uh: Headroom for TCP header
* @data: Storage for TCP payload
*/
static struct tcp4_l2_buf_t {
#ifdef __AVX2__
uint8_t pad[26]; /* 0, align th to 32 bytes */
#else
uint8_t pad[2]; /* align iph to 4 bytes 0 */
#endif
struct tap_hdr taph; /* 26 2 */
struct iphdr iph; /* 44 20 */
struct tcphdr th; /* 64 40 */
uint8_t data[MSS4]; /* 84 60 */
tcp: Clamp MSS value when queueing data to tap, also for pasta Tom reports that a pattern of repated ~1 MiB chunks downloads over NNTP over TLS, on Podman 4.4 using pasta as network back-end, results in pasta taking one full CPU thread after a while, and the download never succeeds. On that setup, we end up re-sending the same frame over and over, with a consistent 65 534 bytes size, and never get an acknowledgement from the tap-side client. This only happens for the default MTU value (65 520 bytes) or for values that are slightly smaller than that (down to 64 499 bytes). We hit this condition because the MSS value we use in tcp_data_from_sock(), only in pasta mode, is simply clamped to USHRT_MAX, and not to the actual size of the buffers we pre-cooked for sending, which is a bit less than that. It looks like we got away with it until commit 0fb7b2b9080a ("tap: Use different io vector bases depending on tap type") fixed the setting of iov_len. Luckily, since it's pasta, we're queueing up to two frames at a time, so the worst that can happen is a badly segmented TCP stream: we always have some space at the tail of the buffer. Clamp the MSS value to the appropriate maximum given by struct tcp{4,6}_buf_data_t, no matter if we're running in pasta or passt mode. While at it, fix the comments to those structs to reflect the current struct size. This is not really relevant for any further calculation or consideration, but it's convenient to know while debugging this kind of issues. Thanks to Tom for reporting the issue in a very detailed way and for providing a test setup. Reported-by: Tom Mombourquette <tom@devnode.com> Link: https://github.com/containers/podman/issues/17703 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 18:07:42 +01:00
/* 65536 65532 */
#ifdef __AVX2__
} __attribute__ ((packed, aligned(32)))
#else
} __attribute__ ((packed, aligned(__alignof__(unsigned int))))
#endif
tcp4_l2_buf[TCP_FRAMES_MEM];
static struct tcp_buf_seq_update tcp4_l2_buf_seq_update[TCP_FRAMES_MEM];
static unsigned int tcp4_l2_buf_used;
/**
* tcp6_l2_buf_t - Pre-cooked IPv6 packet buffers for tap connections
* @pad: Align IPv6 header for checksum calculation to 32B (AVX2) or 4B
* @taph: Tap-level headers (partially pre-filled)
* @ip6h: Pre-filled IP header (except for payload_len and addresses)
* @th: Headroom for TCP header
* @data: Storage for TCP payload
*/
struct tcp6_l2_buf_t {
#ifdef __AVX2__
uint8_t pad[14]; /* 0 align ip6h to 32 bytes */
#else
uint8_t pad[2]; /* align ip6h to 4 bytes 0 */
#endif
struct tap_hdr taph; /* 14 2 */
struct ipv6hdr ip6h; /* 32 20 */
struct tcphdr th; /* 72 60 */
uint8_t data[MSS6]; /* 92 80 */
tcp: Clamp MSS value when queueing data to tap, also for pasta Tom reports that a pattern of repated ~1 MiB chunks downloads over NNTP over TLS, on Podman 4.4 using pasta as network back-end, results in pasta taking one full CPU thread after a while, and the download never succeeds. On that setup, we end up re-sending the same frame over and over, with a consistent 65 534 bytes size, and never get an acknowledgement from the tap-side client. This only happens for the default MTU value (65 520 bytes) or for values that are slightly smaller than that (down to 64 499 bytes). We hit this condition because the MSS value we use in tcp_data_from_sock(), only in pasta mode, is simply clamped to USHRT_MAX, and not to the actual size of the buffers we pre-cooked for sending, which is a bit less than that. It looks like we got away with it until commit 0fb7b2b9080a ("tap: Use different io vector bases depending on tap type") fixed the setting of iov_len. Luckily, since it's pasta, we're queueing up to two frames at a time, so the worst that can happen is a badly segmented TCP stream: we always have some space at the tail of the buffer. Clamp the MSS value to the appropriate maximum given by struct tcp{4,6}_buf_data_t, no matter if we're running in pasta or passt mode. While at it, fix the comments to those structs to reflect the current struct size. This is not really relevant for any further calculation or consideration, but it's convenient to know while debugging this kind of issues. Thanks to Tom for reporting the issue in a very detailed way and for providing a test setup. Reported-by: Tom Mombourquette <tom@devnode.com> Link: https://github.com/containers/podman/issues/17703 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 18:07:42 +01:00
/* 65536 65532 */
#ifdef __AVX2__
} __attribute__ ((packed, aligned(32)))
#else
} __attribute__ ((packed, aligned(__alignof__(unsigned int))))
#endif
tcp6_l2_buf[TCP_FRAMES_MEM];
static struct tcp_buf_seq_update tcp6_l2_buf_seq_update[TCP_FRAMES_MEM];
static unsigned int tcp6_l2_buf_used;
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
/* recvmsg()/sendmsg() data for tap */
static char tcp_buf_discard [MAX_WINDOW];
static struct iovec iov_sock [TCP_FRAMES_MEM + 1];
static struct iovec tcp4_l2_iov [TCP_FRAMES_MEM];
static struct iovec tcp6_l2_iov [TCP_FRAMES_MEM];
static struct iovec tcp4_l2_flags_iov [TCP_FRAMES_MEM];
static struct iovec tcp6_l2_flags_iov [TCP_FRAMES_MEM];
/* sendmsg() to socket */
static struct iovec tcp_iov [UIO_MAXIOV];
/**
* tcp4_l2_flags_buf_t - IPv4 packet buffers for segments without data (flags)
* @pad: Align TCP header to 32 bytes, for AVX2 checksum calculation only
* @taph: Tap-level headers (partially pre-filled)
* @iph: Pre-filled IP header (except for tot_len and saddr)
* @th: Headroom for TCP header
* @opts: Headroom for TCP options
*/
static struct tcp4_l2_flags_buf_t {
#ifdef __AVX2__
uint8_t pad[26]; /* 0, align th to 32 bytes */
#else
uint8_t pad[2]; /* align iph to 4 bytes 0 */
#endif
struct tap_hdr taph; /* 26 2 */
struct iphdr iph; /* 44 20 */
struct tcphdr th; /* 64 40 */
char opts[OPT_MSS_LEN + OPT_WS_LEN + 1];
#ifdef __AVX2__
} __attribute__ ((packed, aligned(32)))
#else
} __attribute__ ((packed, aligned(__alignof__(unsigned int))))
#endif
tcp4_l2_flags_buf[TCP_FRAMES_MEM];
static unsigned int tcp4_l2_flags_buf_used;
/**
* tcp6_l2_flags_buf_t - IPv6 packet buffers for segments without data (flags)
* @pad: Align IPv6 header for checksum calculation to 32B (AVX2) or 4B
* @taph: Tap-level headers (partially pre-filled)
* @ip6h: Pre-filled IP header (except for payload_len and addresses)
* @th: Headroom for TCP header
* @opts: Headroom for TCP options
*/
static struct tcp6_l2_flags_buf_t {
#ifdef __AVX2__
uint8_t pad[14]; /* 0 align ip6h to 32 bytes */
#else
uint8_t pad[2]; /* align ip6h to 4 bytes 0 */
#endif
struct tap_hdr taph; /* 14 2 */
struct ipv6hdr ip6h; /* 32 20 */
struct tcphdr th /* 72 */ __attribute__ ((aligned(4))); /* 60 */
char opts[OPT_MSS_LEN + OPT_WS_LEN + 1];
#ifdef __AVX2__
} __attribute__ ((packed, aligned(32)))
#else
} __attribute__ ((packed, aligned(__alignof__(unsigned int))))
#endif
tcp6_l2_flags_buf[TCP_FRAMES_MEM];
static unsigned int tcp6_l2_flags_buf_used;
#define CONN(idx) (&(FLOW(idx)->tcp))
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
/* Table for lookup from remote address, local port, remote port */
static flow_sidx_t tc_hash[TCP_HASH_TABLE_SIZE];
static_assert(ARRAY_SIZE(tc_hash) >= FLOW_MAX,
"Safe linear probing requires hash table larger than connection table");
/* Pools for pre-opened sockets (in init) */
int init_sock_pool4 [TCP_SOCK_POOL_SIZE];
int init_sock_pool6 [TCP_SOCK_POOL_SIZE];
/**
* tcp_conn_epoll_events() - epoll events mask for given connection state
* @events: Current connection events
* @conn_flags Connection flags
*
* Return: epoll events mask corresponding to implied connection state
*/
static uint32_t tcp_conn_epoll_events(uint8_t events, uint8_t conn_flags)
{
if (!events)
return 0;
if (events & ESTABLISHED) {
if (events & TAP_FIN_SENT)
return EPOLLET;
if (conn_flags & STALLED)
return EPOLLIN | EPOLLOUT | EPOLLRDHUP | EPOLLET;
return EPOLLIN | EPOLLRDHUP;
}
if (events == TAP_SYN_RCVD)
return EPOLLOUT | EPOLLET | EPOLLRDHUP;
return EPOLLRDHUP;
}
static void conn_flag_do(const struct ctx *c, struct tcp_tap_conn *conn,
unsigned long flag);
#define conn_flag(c, conn, flag) \
do { \
flow_trace(conn, "flag at %s:%i", __func__, __LINE__); \
conn_flag_do(c, conn, flag); \
} while (0)
/**
* tcp_epoll_ctl() - Add/modify/delete epoll state from connection events
* @c: Execution context
* @conn: Connection pointer
*
* Return: 0 on success, negative error code on failure (not on deletion)
*/
static int tcp_epoll_ctl(const struct ctx *c, struct tcp_tap_conn *conn)
{
int m = conn->in_epoll ? EPOLL_CTL_MOD : EPOLL_CTL_ADD;
union epoll_ref ref = { .type = EPOLL_TYPE_TCP, .fd = conn->sock,
.flowside = FLOW_SIDX(conn, SOCKSIDE) };
struct epoll_event ev = { .data.u64 = ref.u64 };
if (conn->events == CLOSED) {
if (conn->in_epoll)
epoll_ctl(c->epollfd, EPOLL_CTL_DEL, conn->sock, &ev);
if (conn->timer != -1)
epoll_ctl(c->epollfd, EPOLL_CTL_DEL, conn->timer, &ev);
return 0;
}
ev.events = tcp_conn_epoll_events(conn->events, conn->flags);
if (epoll_ctl(c->epollfd, m, conn->sock, &ev))
return -errno;
conn->in_epoll = true;
if (conn->timer != -1) {
union epoll_ref ref_t = { .type = EPOLL_TYPE_TCP_TIMER,
.fd = conn->sock,
.flow = FLOW_IDX(conn) };
struct epoll_event ev_t = { .data.u64 = ref_t.u64,
.events = EPOLLIN | EPOLLET };
if (epoll_ctl(c->epollfd, EPOLL_CTL_MOD, conn->timer, &ev_t))
return -errno;
}
return 0;
}
/**
* tcp_timer_ctl() - Set timerfd based on flags/events, create timerfd if needed
* @c: Execution context
* @conn: Connection pointer
*
* #syscalls timerfd_create timerfd_settime
*/
static void tcp_timer_ctl(const struct ctx *c, struct tcp_tap_conn *conn)
{
struct itimerspec it = { { 0 }, { 0 } };
if (conn->events == CLOSED)
return;
if (conn->timer == -1) {
union epoll_ref ref = { .type = EPOLL_TYPE_TCP_TIMER,
.fd = conn->sock,
.flow = FLOW_IDX(conn) };
struct epoll_event ev = { .data.u64 = ref.u64,
.events = EPOLLIN | EPOLLET };
int fd;
fd = timerfd_create(CLOCK_MONOTONIC, 0);
if (fd == -1 || fd > FD_REF_MAX) {
flow_dbg(conn, "failed to get timer: %s",
strerror(errno));
if (fd > -1)
close(fd);
conn->timer = -1;
return;
}
conn->timer = fd;
if (epoll_ctl(c->epollfd, EPOLL_CTL_ADD, conn->timer, &ev)) {
flow_dbg(conn, "failed to add timer: %s",
strerror(errno));
close(conn->timer);
conn->timer = -1;
return;
}
}
if (conn->flags & ACK_TO_TAP_DUE) {
it.it_value.tv_nsec = (long)ACK_INTERVAL * 1000 * 1000;
} else if (conn->flags & ACK_FROM_TAP_DUE) {
if (!(conn->events & ESTABLISHED))
it.it_value.tv_sec = SYN_TIMEOUT;
else
it.it_value.tv_sec = ACK_TIMEOUT;
} else if (CONN_HAS(conn, SOCK_FIN_SENT | TAP_FIN_ACKED)) {
it.it_value.tv_sec = FIN_TIMEOUT;
} else {
it.it_value.tv_sec = ACT_TIMEOUT;
}
flow_dbg(conn, "timer expires in %llu.%03llus",
(unsigned long long)it.it_value.tv_sec,
(unsigned long long)it.it_value.tv_nsec / 1000 / 1000);
timerfd_settime(conn->timer, 0, &it, NULL);
}
/**
* conn_flag_do() - Set/unset given flag, log, update epoll on STALLED flag
* @c: Execution context
* @conn: Connection pointer
* @flag: Flag to set, or ~flag to unset
*/
static void conn_flag_do(const struct ctx *c, struct tcp_tap_conn *conn,
unsigned long flag)
{
if (flag & (flag - 1)) {
int flag_index = fls(~flag);
if (!(conn->flags & ~flag))
return;
conn->flags &= flag;
if (flag_index >= 0)
flow_dbg(conn, "%s dropped", tcp_flag_str[flag_index]);
} else {
int flag_index = fls(flag);
tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer David reports that TCP transfers might stall, especially with smaller socket buffer sizes, because we reset the ACK_FROM_TAP_DUE flag, in tcp_tap_handler(), whenever we receive an ACK segment, regardless of its sequence number and the fact that we might still be waiting for one. This way, we might fail to re-transmit frames on ACK timeouts. We need, instead, to: - indicate with the @retrans field only re-transmissions for the same data sequences. If we make progress, it should be reset, given that it's used to abort a connection when we exceed a given number of re-transmissions for the same data - unset the ACK_FROM_TAP_DUE flag if and only if the acknowledged sequence is the same as the last one we sent, as suggested by David - keep it set otherwise, if progress was done but not all the data we sent was acknowledged, and update the expiration of the ACK timeout Add a new helper for these purposes, tcp_update_seqack_from_tap(). To extend the ACK timeout, the new helper sets the ACK_FROM_TAP_DUE flag, even if it was already set, and conn_flag_do() triggers a timer update. This part should be revisited at a later time, because, strictly speaking, ACK_FROM_TAP_DUE isn't a flag anymore. One possibility might be to introduce another connection attribute for events affecting timer deadlines. Reported-by: David Gibson <david@gibson.dropbear.id.au> Link: https://bugs.passt.top/show_bug.cgi?id=41 Suggested-by: David Gibson <david@gibson.dropbear.id.au> Fixes: be5bbb9b0681 ("tcp: Rework timers to use timerfd instead of periodic bitmap scan") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-02-12 22:26:55 +01:00
if (conn->flags & flag) {
/* Special case: setting ACK_FROM_TAP_DUE on a
* connection where it's already set is used to
* re-schedule the existing timer.
* TODO: define clearer semantics for timer-related
* flags and factor this into the logic below.
*/
if (flag == ACK_FROM_TAP_DUE)
tcp_timer_ctl(c, conn);
return;
tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer David reports that TCP transfers might stall, especially with smaller socket buffer sizes, because we reset the ACK_FROM_TAP_DUE flag, in tcp_tap_handler(), whenever we receive an ACK segment, regardless of its sequence number and the fact that we might still be waiting for one. This way, we might fail to re-transmit frames on ACK timeouts. We need, instead, to: - indicate with the @retrans field only re-transmissions for the same data sequences. If we make progress, it should be reset, given that it's used to abort a connection when we exceed a given number of re-transmissions for the same data - unset the ACK_FROM_TAP_DUE flag if and only if the acknowledged sequence is the same as the last one we sent, as suggested by David - keep it set otherwise, if progress was done but not all the data we sent was acknowledged, and update the expiration of the ACK timeout Add a new helper for these purposes, tcp_update_seqack_from_tap(). To extend the ACK timeout, the new helper sets the ACK_FROM_TAP_DUE flag, even if it was already set, and conn_flag_do() triggers a timer update. This part should be revisited at a later time, because, strictly speaking, ACK_FROM_TAP_DUE isn't a flag anymore. One possibility might be to introduce another connection attribute for events affecting timer deadlines. Reported-by: David Gibson <david@gibson.dropbear.id.au> Link: https://bugs.passt.top/show_bug.cgi?id=41 Suggested-by: David Gibson <david@gibson.dropbear.id.au> Fixes: be5bbb9b0681 ("tcp: Rework timers to use timerfd instead of periodic bitmap scan") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-02-12 22:26:55 +01:00
}
conn->flags |= flag;
if (flag_index >= 0)
flow_dbg(conn, "%s", tcp_flag_str[flag_index]);
}
if (flag == STALLED || flag == ~STALLED)
tcp_epoll_ctl(c, conn);
if (flag == ACK_FROM_TAP_DUE || flag == ACK_TO_TAP_DUE ||
(flag == ~ACK_FROM_TAP_DUE && (conn->flags & ACK_TO_TAP_DUE)) ||
(flag == ~ACK_TO_TAP_DUE && (conn->flags & ACK_FROM_TAP_DUE)))
tcp_timer_ctl(c, conn);
}
static void tcp_hash_remove(const struct ctx *c,
const struct tcp_tap_conn *conn);
/**
* conn_event_do() - Set and log connection events, update epoll state
* @c: Execution context
* @conn: Connection pointer
* @event: Connection event
*/
static void conn_event_do(const struct ctx *c, struct tcp_tap_conn *conn,
unsigned long event)
{
int prev, new, num = fls(event);
if (conn->events & event)
return;
prev = fls(conn->events);
if (conn->flags & ACTIVE_CLOSE)
prev += 5;
if ((conn->events & ESTABLISHED) && (conn->events != ESTABLISHED))
prev++; /* i.e. SOCK_FIN_RCVD, not TAP_SYN_ACK_SENT */
if (event == CLOSED || (event & CONN_STATE_BITS))
conn->events = event;
else
conn->events |= event;
new = fls(conn->events);
if ((conn->events & ESTABLISHED) && (conn->events != ESTABLISHED)) {
num++;
new++;
}
if (conn->flags & ACTIVE_CLOSE)
new += 5;
if (prev != new)
flow_dbg(conn, "%s: %s -> %s",
num == -1 ? "CLOSED" : tcp_event_str[num],
prev == -1 ? "CLOSED" : tcp_state_str[prev],
(new == -1 || num == -1) ? "CLOSED" : tcp_state_str[new]);
else
flow_dbg(conn, "%s",
num == -1 ? "CLOSED" : tcp_event_str[num]);
if (event == CLOSED)
tcp_hash_remove(c, conn);
else if ((event == TAP_FIN_RCVD) && !(conn->events & SOCK_FIN_RCVD))
conn_flag(c, conn, ACTIVE_CLOSE);
else
tcp_epoll_ctl(c, conn);
if (CONN_HAS(conn, SOCK_FIN_SENT | TAP_FIN_ACKED))
tcp_timer_ctl(c, conn);
}
#define conn_event(c, conn, event) \
do { \
flow_trace(conn, "event at %s:%i", __func__, __LINE__); \
conn_event_do(c, conn, event); \
} while (0)
/**
* tcp_rtt_dst_low() - Check if low RTT was seen for connection endpoint
* @conn: Connection pointer
*
* Return: 1 if destination is in low RTT table, 0 otherwise
*/
static int tcp_rtt_dst_low(const struct tcp_tap_conn *conn)
{
int i;
for (i = 0; i < LOW_RTT_TABLE_SIZE; i++)
if (inany_equals(&conn->faddr, low_rtt_dst + i))
return 1;
return 0;
}
/**
* tcp_rtt_dst_check() - Check tcpi_min_rtt, insert endpoint in table if low
* @conn: Connection pointer
* @tinfo: Pointer to struct tcp_info for socket
*/
static void tcp_rtt_dst_check(const struct tcp_tap_conn *conn,
const struct tcp_info *tinfo)
{
#ifdef HAS_MIN_RTT
int i, hole = -1;
if (!tinfo->tcpi_min_rtt ||
(int)tinfo->tcpi_min_rtt > LOW_RTT_THRESHOLD)
return;
for (i = 0; i < LOW_RTT_TABLE_SIZE; i++) {
if (inany_equals(&conn->faddr, low_rtt_dst + i))
return;
if (hole == -1 && IN6_IS_ADDR_UNSPECIFIED(low_rtt_dst + i))
hole = i;
}
/* Keep gcc 12 happy: this won't actually happen because the table is
* guaranteed to have a hole, see the second memcpy() below.
*/
if (hole == -1)
return;
low_rtt_dst[hole++] = conn->faddr;
if (hole == LOW_RTT_TABLE_SIZE)
hole = 0;
inany_from_af(low_rtt_dst + hole, AF_INET6, &in6addr_any);
#else
(void)conn;
(void)tinfo;
#endif /* HAS_MIN_RTT */
}
/**
* tcp_get_sndbuf() - Get, scale SO_SNDBUF between thresholds (1 to 0.5 usage)
* @conn: Connection pointer
*/
static void tcp_get_sndbuf(struct tcp_tap_conn *conn)
{
int s = conn->sock, sndbuf;
socklen_t sl;
uint64_t v;
sl = sizeof(sndbuf);
if (getsockopt(s, SOL_SOCKET, SO_SNDBUF, &sndbuf, &sl)) {
SNDBUF_SET(conn, WINDOW_DEFAULT);
return;
}
v = sndbuf;
if (v >= SNDBUF_BIG)
v /= 2;
else if (v > SNDBUF_SMALL)
v -= v * (v - SNDBUF_SMALL) / (SNDBUF_BIG - SNDBUF_SMALL) / 2;
SNDBUF_SET(conn, MIN(INT_MAX, v));
}
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
/**
* tcp_sock_set_bufsize() - Set SO_RCVBUF and SO_SNDBUF to maximum values
* @s: Socket, can be -1 to avoid check in the caller
*/
static void tcp_sock_set_bufsize(const struct ctx *c, int s)
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
{
int v = INT_MAX / 2; /* Kernel clamps and rounds, no need to check */
if (s == -1)
return;
if (!c->low_rmem && setsockopt(s, SOL_SOCKET, SO_RCVBUF, &v, sizeof(v)))
trace("TCP: failed to set SO_RCVBUF to %i", v);
if (!c->low_wmem && setsockopt(s, SOL_SOCKET, SO_SNDBUF, &v, sizeof(v)))
trace("TCP: failed to set SO_SNDBUF to %i", v);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
}
/**
* tcp_update_check_ip4() - Update IPv4 with variable parts from stored one
* @buf: L2 packet buffer with final IPv4 header
*/
static void tcp_update_check_ip4(struct tcp4_l2_buf_t *buf)
{
uint32_t sum = L2_BUF_IP4_PSUM(IPPROTO_TCP);
sum += buf->iph.tot_len;
sum += (buf->iph.saddr >> 16) & 0xffff;
sum += buf->iph.saddr & 0xffff;
sum += (buf->iph.daddr >> 16) & 0xffff;
sum += buf->iph.daddr & 0xffff;
buf->iph.check = (uint16_t)~csum_fold(sum);
}
/**
* tcp_update_check_tcp4() - Update TCP checksum from stored one
* @buf: L2 packet buffer with final IPv4 header
*/
static void tcp_update_check_tcp4(struct tcp4_l2_buf_t *buf)
{
uint16_t tlen = ntohs(buf->iph.tot_len) - 20;
uint32_t sum = htons(IPPROTO_TCP);
sum += (buf->iph.saddr >> 16) & 0xffff;
sum += buf->iph.saddr & 0xffff;
sum += (buf->iph.daddr >> 16) & 0xffff;
sum += buf->iph.daddr & 0xffff;
sum += htons(ntohs(buf->iph.tot_len) - 20);
buf->th.check = 0;
buf->th.check = csum(&buf->th, tlen, sum);
}
/**
* tcp_update_check_tcp6() - Calculate TCP checksum for IPv6
* @buf: L2 packet buffer with final IPv6 header
*/
static void tcp_update_check_tcp6(struct tcp6_l2_buf_t *buf)
{
int len = ntohs(buf->ip6h.payload_len) + sizeof(struct ipv6hdr);
buf->ip6h.hop_limit = IPPROTO_TCP;
buf->ip6h.version = 0;
buf->ip6h.nexthdr = 0;
buf->th.check = 0;
buf->th.check = csum(&buf->ip6h, len, 0);
buf->ip6h.hop_limit = 255;
buf->ip6h.version = 6;
buf->ip6h.nexthdr = IPPROTO_TCP;
}
/**
* tcp_update_l2_buf() - Update L2 buffers with Ethernet and IPv4 addresses
* @eth_d: Ethernet destination address, NULL if unchanged
* @eth_s: Ethernet source address, NULL if unchanged
*/
void tcp_update_l2_buf(const unsigned char *eth_d, const unsigned char *eth_s)
{
int i;
for (i = 0; i < TCP_FRAMES_MEM; i++) {
struct tcp4_l2_flags_buf_t *b4f = &tcp4_l2_flags_buf[i];
struct tcp6_l2_flags_buf_t *b6f = &tcp6_l2_flags_buf[i];
struct tcp4_l2_buf_t *b4 = &tcp4_l2_buf[i];
struct tcp6_l2_buf_t *b6 = &tcp6_l2_buf[i];
tap_update_mac(&b4->taph, eth_d, eth_s);
tap_update_mac(&b6->taph, eth_d, eth_s);
tap_update_mac(&b4f->taph, eth_d, eth_s);
tap_update_mac(&b6f->taph, eth_d, eth_s);
}
}
/**
* tcp_sock4_iov_init() - Initialise scatter-gather L2 buffers for IPv4 sockets
* @c: Execution context
*/
static void tcp_sock4_iov_init(const struct ctx *c)
{
struct iphdr iph = L2_BUF_IP4_INIT(IPPROTO_TCP);
struct iovec *iov;
int i;
for (i = 0; i < ARRAY_SIZE(tcp4_l2_buf); i++) {
tcp4_l2_buf[i] = (struct tcp4_l2_buf_t) {
.taph = TAP_HDR_INIT(ETH_P_IP),
.iph = iph,
.th = { .doff = sizeof(struct tcphdr) / 4, .ack = 1 }
};
}
for (i = 0; i < ARRAY_SIZE(tcp4_l2_flags_buf); i++) {
tcp4_l2_flags_buf[i] = (struct tcp4_l2_flags_buf_t) {
.taph = TAP_HDR_INIT(ETH_P_IP),
.iph = L2_BUF_IP4_INIT(IPPROTO_TCP)
};
}
for (i = 0, iov = tcp4_l2_iov; i < TCP_FRAMES_MEM; i++, iov++)
iov->iov_base = tap_iov_base(c, &tcp4_l2_buf[i].taph);
for (i = 0, iov = tcp4_l2_flags_iov; i < TCP_FRAMES_MEM; i++, iov++)
iov->iov_base = tap_iov_base(c, &tcp4_l2_flags_buf[i].taph);
}
/**
* tcp_sock6_iov_init() - Initialise scatter-gather L2 buffers for IPv6 sockets
* @c: Execution context
*/
static void tcp_sock6_iov_init(const struct ctx *c)
{
struct iovec *iov;
int i;
for (i = 0; i < ARRAY_SIZE(tcp6_l2_buf); i++) {
tcp6_l2_buf[i] = (struct tcp6_l2_buf_t) {
.taph = TAP_HDR_INIT(ETH_P_IPV6),
.ip6h = L2_BUF_IP6_INIT(IPPROTO_TCP),
.th = { .doff = sizeof(struct tcphdr) / 4, .ack = 1 }
};
}
for (i = 0; i < ARRAY_SIZE(tcp6_l2_flags_buf); i++) {
tcp6_l2_flags_buf[i] = (struct tcp6_l2_flags_buf_t) {
.taph = TAP_HDR_INIT(ETH_P_IPV6),
.ip6h = L2_BUF_IP6_INIT(IPPROTO_TCP)
};
}
for (i = 0, iov = tcp6_l2_iov; i < TCP_FRAMES_MEM; i++, iov++)
iov->iov_base = tap_iov_base(c, &tcp6_l2_buf[i].taph);
for (i = 0, iov = tcp6_l2_flags_iov; i < TCP_FRAMES_MEM; i++, iov++)
iov->iov_base = tap_iov_base(c, &tcp6_l2_flags_buf[i].taph);
}
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
/**
* tcp_opt_get() - Get option, and value if any, from TCP header
* @opts: Pointer to start of TCP options in header
* @len: Length of buffer, excluding TCP header -- NOT checked here!
* @type_find: Option type to look for
* @optlen_set: Optional, filled with option length if passed
* @value_set: Optional, set to start of option value if passed
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*
* Return: option value, meaningful for up to 4 bytes, -1 if not found
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*/
static int tcp_opt_get(const char *opts, size_t len, uint8_t type_find,
uint8_t *optlen_set, const char **value_set)
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
{
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 11:33:38 +01:00
uint8_t type, optlen;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
if (!opts || !len)
return -1;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
for (; len >= 2; opts += optlen, len -= optlen) {
switch (*opts) {
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
case OPT_EOL:
return -1;
case OPT_NOP:
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 11:33:38 +01:00
optlen = 1;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
break;
default:
type = *(opts++);
if (*(uint8_t *)opts < 2 || *(uint8_t *)opts > len)
return -1;
optlen = *(opts++) - 2;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
len -= 2;
if (type != type_find)
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 11:33:38 +01:00
break;
if (optlen_set)
*optlen_set = optlen;
if (value_set)
*value_set = opts;
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 11:33:38 +01:00
switch (optlen) {
case 0:
return 0;
case 1:
return *opts;
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 11:33:38 +01:00
case 2:
return ntohs(*(uint16_t *)opts);
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 11:33:38 +01:00
default:
return ntohl(*(uint32_t *)opts);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}
}
}
return -1;
}
/**
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* tcp_hash_match() - Check if a connection entry matches address and ports
* @conn: Connection entry to match against
* @faddr: Guest side forwarding address
* @eport: Guest side endpoint port
* @fport: Guest side forwarding port
*
* Return: 1 on match, 0 otherwise
*/
static int tcp_hash_match(const struct tcp_tap_conn *conn,
const union inany_addr *faddr,
in_port_t eport, in_port_t fport)
{
if (inany_equals(&conn->faddr, faddr) &&
conn->eport == eport && conn->fport == fport)
return 1;
return 0;
}
/**
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* tcp_hash() - Calculate hash value for connection given address and ports
* @c: Execution context
* @faddr: Guest side forwarding address
* @eport: Guest side endpoint port
* @fport: Guest side forwarding port
*
* Return: hash value, needs to be adjusted for table size
*/
static uint64_t tcp_hash(const struct ctx *c, const union inany_addr *faddr,
in_port_t eport, in_port_t fport)
{
struct siphash_state state = SIPHASH_INIT(c->hash_secret);
inany_siphash_feed(&state, faddr);
return siphash_final(&state, 20, (uint64_t)eport << 16 | fport);
}
/**
* tcp_conn_hash() - Calculate hash bucket of an existing connection
* @c: Execution context
* @conn: Connection
*
* Return: hash value, needs to be adjusted for table size
*/
static uint64_t tcp_conn_hash(const struct ctx *c,
const struct tcp_tap_conn *conn)
{
return tcp_hash(c, &conn->faddr, conn->eport, conn->fport);
}
/**
* tcp_hash_probe() - Find hash bucket for a connection
* @c: Execution context
* @conn: Connection to find bucket for
*
* Return: If @conn is in the table, its current bucket, otherwise a suitable
* free bucket for it.
*/
static inline unsigned tcp_hash_probe(const struct ctx *c,
const struct tcp_tap_conn *conn)
{
flow_sidx_t sidx = FLOW_SIDX(conn, TAPSIDE);
unsigned b = tcp_conn_hash(c, conn) % TCP_HASH_TABLE_SIZE;
/* Linear probing */
while (!flow_sidx_eq(tc_hash[b], FLOW_SIDX_NONE) &&
!flow_sidx_eq(tc_hash[b], sidx))
b = mod_sub(b, 1, TCP_HASH_TABLE_SIZE);
return b;
}
/**
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* tcp_hash_insert() - Insert connection into hash table, chain link
* @c: Execution context
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* @conn: Connection pointer
*/
static void tcp_hash_insert(const struct ctx *c, struct tcp_tap_conn *conn)
{
unsigned b = tcp_hash_probe(c, conn);
tc_hash[b] = FLOW_SIDX(conn, TAPSIDE);
flow_dbg(conn, "hash table insert: sock %i, bucket: %u", conn->sock, b);
}
/**
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* tcp_hash_remove() - Drop connection from hash table, chain unlink
* @c: Execution context
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* @conn: Connection pointer
*/
static void tcp_hash_remove(const struct ctx *c,
const struct tcp_tap_conn *conn)
{
unsigned b = tcp_hash_probe(c, conn), s;
union flow *flow = flow_at_sidx(tc_hash[b]);
if (!flow)
return; /* Redundant remove */
flow_dbg(conn, "hash table remove: sock %i, bucket: %u", conn->sock, b);
/* Scan the remainder of the cluster */
for (s = mod_sub(b, 1, TCP_HASH_TABLE_SIZE);
(flow = flow_at_sidx(tc_hash[s]));
s = mod_sub(s, 1, TCP_HASH_TABLE_SIZE)) {
unsigned h = tcp_conn_hash(c, &flow->tcp) % TCP_HASH_TABLE_SIZE;
if (!mod_between(h, s, b, TCP_HASH_TABLE_SIZE)) {
/* tc_hash[s] can live in tc_hash[b]'s slot */
debug("hash table remove: shuffle %u -> %u", s, b);
tc_hash[b] = tc_hash[s];
b = s;
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
}
}
tc_hash[b] = FLOW_SIDX_NONE;
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
}
/**
* tcp_tap_conn_update() - Update tcp_tap_conn when being moved in the table
* @c: Execution context
* @old: Old location of tcp_tap_conn
* @new: New location of tcp_tap_conn
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
*/
void tcp_tap_conn_update(const struct ctx *c, struct tcp_tap_conn *old,
struct tcp_tap_conn *new)
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
{
unsigned b = tcp_hash_probe(c, old);
if (!flow_at_sidx(tc_hash[b]))
return; /* Not in hash table, nothing to update */
tc_hash[b] = FLOW_SIDX(new, TAPSIDE);
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
debug("TCP: hash table update: old index %u, new index %u, sock %i, "
"bucket: %u", FLOW_IDX(old), FLOW_IDX(new), new->sock, b);
tcp_epoll_ctl(c, new);
}
/**
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* tcp_hash_lookup() - Look up connection given remote address and ports
* @c: Execution context
* @af: Address family, AF_INET or AF_INET6
* @faddr: Guest side forwarding address (guest remote address)
* @eport: Guest side endpoint port (guest local port)
* @fport: Guest side forwarding port (guest remote port)
*
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* Return: connection pointer, if found, -ENOENT otherwise
*/
static struct tcp_tap_conn *tcp_hash_lookup(const struct ctx *c,
int af, const void *faddr,
in_port_t eport, in_port_t fport)
{
union inany_addr aany;
union flow *flow;
unsigned b;
inany_from_af(&aany, af, faddr);
b = tcp_hash(c, &aany, eport, fport) % TCP_HASH_TABLE_SIZE;
while ((flow = flow_at_sidx(tc_hash[b])) &&
!tcp_hash_match(&flow->tcp, &aany, eport, fport))
b = mod_sub(b, 1, TCP_HASH_TABLE_SIZE);
return &flow->tcp;
}
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
/**
* tcp_conn_destroy() - Close sockets, trigger hash table removal and compaction
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* @c: Execution context
* @flow: Flow table entry for this connection
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*/
static void tcp_conn_destroy(struct ctx *c, union flow *flow)
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
{
const struct tcp_tap_conn *conn = &flow->tcp;
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
close(conn->sock);
if (conn->timer != -1)
close(conn->timer);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
flow_table_compact(c, flow);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}
static void tcp_rst_do(struct ctx *c, struct tcp_tap_conn *conn);
#define tcp_rst(c, conn) \
do { \
flow_dbg((conn), "TCP reset at %s:%i", __func__, __LINE__); \
tcp_rst_do(c, conn); \
} while (0)
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
/**
* tcp_l2_flags_buf_flush() - Send out buffers for segments with no data (flags)
* @c: Execution context
*/
static void tcp_l2_flags_buf_flush(const struct ctx *c)
{
tap_send_frames(c, tcp6_l2_flags_iov, tcp6_l2_flags_buf_used);
tcp6_l2_flags_buf_used = 0;
tap_send_frames(c, tcp4_l2_flags_iov, tcp4_l2_flags_buf_used);
tcp4_l2_flags_buf_used = 0;
}
/**
* tcp_l2_data_buf_flush() - Send out buffers for segments with data
* @c: Execution context
*/
static void tcp_l2_data_buf_flush(const struct ctx *c)
{
unsigned i;
size_t m;
m = tap_send_frames(c, tcp6_l2_iov, tcp6_l2_buf_used);
for (i = 0; i < m; i++)
*tcp6_l2_buf_seq_update[i].seq += tcp6_l2_buf_seq_update[i].len;
tcp6_l2_buf_used = 0;
m = tap_send_frames(c, tcp4_l2_iov, tcp4_l2_buf_used);
for (i = 0; i < m; i++)
*tcp4_l2_buf_seq_update[i].seq += tcp4_l2_buf_seq_update[i].len;
tcp4_l2_buf_used = 0;
}
/**
* tcp_defer_handler() - Handler for TCP deferred tasks
* @c: Execution context
*/
void tcp_defer_handler(struct ctx *c)
{
union flow *flow;
tcp_l2_flags_buf_flush(c);
tcp_l2_data_buf_flush(c);
for (flow = flowtab + c->flow_count - 1; flow >= flowtab; flow--) {
switch (flow->f.type) {
case FLOW_TCP:
if (flow->tcp.events == CLOSED)
tcp_conn_destroy(c, flow);
break;
case FLOW_TCP_SPLICE:
if (flow->tcp_splice.flags & CLOSING)
tcp_splice_destroy(c, flow);
break;
default:
die("Unexpected %s in tcp_defer_handler()",
FLOW_TYPE(&flow->f));
}
}
}
/**
* tcp_l2_buf_fill_headers() - Fill 802.3, IP, TCP headers in pre-cooked buffers
* @c: Execution context
* @conn: Connection pointer
* @p: Pointer to any type of TCP pre-cooked buffer
* @plen: Payload length (including TCP header options)
* @check: Checksum, if already known
* @seq: Sequence number for this segment
*
* Return: frame length including L2 headers, host order
*/
static size_t tcp_l2_buf_fill_headers(const struct ctx *c,
const struct tcp_tap_conn *conn,
void *p, size_t plen,
const uint16_t *check, uint32_t seq)
{
const struct in_addr *a4 = inany_v4(&conn->faddr);
size_t ip_len, tlen;
#define SET_TCP_HEADER_COMMON_V4_V6(b, conn, seq) \
do { \
b->th.source = htons(conn->fport); \
b->th.dest = htons(conn->eport); \
b->th.seq = htonl(seq); \
b->th.ack_seq = htonl(conn->seq_ack_to_tap); \
if (conn->events & ESTABLISHED) { \
b->th.window = htons(conn->wnd_to_tap); \
} else { \
unsigned wnd = conn->wnd_to_tap << conn->ws_to_tap; \
\
b->th.window = htons(MIN(wnd, USHRT_MAX)); \
} \
} while (0)
if (a4) {
struct tcp4_l2_buf_t *b = (struct tcp4_l2_buf_t *)p;
ip_len = plen + sizeof(struct iphdr) + sizeof(struct tcphdr);
b->iph.tot_len = htons(ip_len);
b->iph.saddr = a4->s_addr;
b->iph.daddr = c->ip4.addr_seen.s_addr;
if (check)
b->iph.check = *check;
else
tcp_update_check_ip4(b);
SET_TCP_HEADER_COMMON_V4_V6(b, conn, seq);
tcp_update_check_tcp4(b);
tlen = tap_iov_len(c, &b->taph, ip_len);
} else {
struct tcp6_l2_buf_t *b = (struct tcp6_l2_buf_t *)p;
ip_len = plen + sizeof(struct ipv6hdr) + sizeof(struct tcphdr);
b->ip6h.payload_len = htons(plen + sizeof(struct tcphdr));
b->ip6h.saddr = conn->faddr.a6;
if (IN6_IS_ADDR_LINKLOCAL(&b->ip6h.saddr))
b->ip6h.daddr = c->ip6.addr_ll_seen;
else
b->ip6h.daddr = c->ip6.addr_seen;
memset(b->ip6h.flow_lbl, 0, 3);
SET_TCP_HEADER_COMMON_V4_V6(b, conn, seq);
tcp_update_check_tcp6(b);
b->ip6h.flow_lbl[0] = (conn->sock >> 16) & 0xf;
b->ip6h.flow_lbl[1] = (conn->sock >> 8) & 0xff;
b->ip6h.flow_lbl[2] = (conn->sock >> 0) & 0xff;
tlen = tap_iov_len(c, &b->taph, ip_len);
}
#undef SET_TCP_HEADER_COMMON_V4_V6
return tlen;
}
/**
* tcp_update_seqack_wnd() - Update ACK sequence and window to guest/tap
* @c: Execution context
* @conn: Connection pointer
* @force_seq: Force ACK sequence to latest segment, instead of checking socket
* @tinfo: tcp_info from kernel, can be NULL if not pre-fetched
*
* Return: 1 if sequence or window were updated, 0 otherwise
*/
static int tcp_update_seqack_wnd(const struct ctx *c, struct tcp_tap_conn *conn,
int force_seq, struct tcp_info *tinfo)
{
uint32_t prev_wnd_to_tap = conn->wnd_to_tap << conn->ws_to_tap;
uint32_t prev_ack_to_tap = conn->seq_ack_to_tap;
/* cppcheck-suppress [ctunullpointer, unmatchedSuppression] */
socklen_t sl = sizeof(*tinfo);
struct tcp_info tinfo_new;
uint32_t new_wnd_to_tap = prev_wnd_to_tap;
int s = conn->sock;
#ifndef HAS_BYTES_ACKED
(void)force_seq;
conn->seq_ack_to_tap = conn->seq_from_tap;
if (SEQ_LT(conn->seq_ack_to_tap, prev_ack_to_tap))
conn->seq_ack_to_tap = prev_ack_to_tap;
#else
if ((unsigned)SNDBUF_GET(conn) < SNDBUF_SMALL || tcp_rtt_dst_low(conn)
|| CONN_IS_CLOSING(conn) || (conn->flags & LOCAL) || force_seq) {
conn->seq_ack_to_tap = conn->seq_from_tap;
} else if (conn->seq_ack_to_tap != conn->seq_from_tap) {
if (!tinfo) {
tinfo = &tinfo_new;
if (getsockopt(s, SOL_TCP, TCP_INFO, tinfo, &sl))
return 0;
}
conn->seq_ack_to_tap = tinfo->tcpi_bytes_acked +
conn->seq_init_from_tap;
if (SEQ_LT(conn->seq_ack_to_tap, prev_ack_to_tap))
conn->seq_ack_to_tap = prev_ack_to_tap;
}
#endif /* !HAS_BYTES_ACKED */
if (!KERNEL_REPORTS_SND_WND(c)) {
tcp_get_sndbuf(conn);
new_wnd_to_tap = MIN(SNDBUF_GET(conn), MAX_WINDOW);
conn->wnd_to_tap = MIN(new_wnd_to_tap >> conn->ws_to_tap,
USHRT_MAX);
goto out;
}
if (!tinfo) {
if (prev_wnd_to_tap > WINDOW_DEFAULT) {
goto out;
}
tinfo = &tinfo_new;
if (getsockopt(s, SOL_TCP, TCP_INFO, tinfo, &sl)) {
goto out;
}
}
#ifdef HAS_SND_WND
if ((conn->flags & LOCAL) || tcp_rtt_dst_low(conn)) {
new_wnd_to_tap = tinfo->tcpi_snd_wnd;
} else {
tcp_get_sndbuf(conn);
new_wnd_to_tap = MIN((int)tinfo->tcpi_snd_wnd,
SNDBUF_GET(conn));
}
#endif
new_wnd_to_tap = MIN(new_wnd_to_tap, MAX_WINDOW);
if (!(conn->events & ESTABLISHED))
new_wnd_to_tap = MAX(new_wnd_to_tap, WINDOW_DEFAULT);
conn->wnd_to_tap = MIN(new_wnd_to_tap >> conn->ws_to_tap, USHRT_MAX);
/* Certain cppcheck versions, e.g. 2.12.0 have a bug where they think
* the MIN() above restricts conn->wnd_to_tap to be zero. That's
* clearly incorrect, but until the bug is fixed, work around it.
* https://bugzilla.redhat.com/show_bug.cgi?id=2240705
* https://sourceforge.net/p/cppcheck/discussion/general/thread/f5b1a00646/
*/
/* cppcheck-suppress [knownConditionTrueFalse, unmatchedSuppression] */
if (!conn->wnd_to_tap)
conn_flag(c, conn, ACK_TO_TAP_DUE);
out:
return new_wnd_to_tap != prev_wnd_to_tap ||
conn->seq_ack_to_tap != prev_ack_to_tap;
}
tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer David reports that TCP transfers might stall, especially with smaller socket buffer sizes, because we reset the ACK_FROM_TAP_DUE flag, in tcp_tap_handler(), whenever we receive an ACK segment, regardless of its sequence number and the fact that we might still be waiting for one. This way, we might fail to re-transmit frames on ACK timeouts. We need, instead, to: - indicate with the @retrans field only re-transmissions for the same data sequences. If we make progress, it should be reset, given that it's used to abort a connection when we exceed a given number of re-transmissions for the same data - unset the ACK_FROM_TAP_DUE flag if and only if the acknowledged sequence is the same as the last one we sent, as suggested by David - keep it set otherwise, if progress was done but not all the data we sent was acknowledged, and update the expiration of the ACK timeout Add a new helper for these purposes, tcp_update_seqack_from_tap(). To extend the ACK timeout, the new helper sets the ACK_FROM_TAP_DUE flag, even if it was already set, and conn_flag_do() triggers a timer update. This part should be revisited at a later time, because, strictly speaking, ACK_FROM_TAP_DUE isn't a flag anymore. One possibility might be to introduce another connection attribute for events affecting timer deadlines. Reported-by: David Gibson <david@gibson.dropbear.id.au> Link: https://bugs.passt.top/show_bug.cgi?id=41 Suggested-by: David Gibson <david@gibson.dropbear.id.au> Fixes: be5bbb9b0681 ("tcp: Rework timers to use timerfd instead of periodic bitmap scan") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-02-12 22:26:55 +01:00
/**
* tcp_update_seqack_from_tap() - ACK number from tap and related flags/counters
* @c: Execution context
* @conn: Connection pointer
* @seq Current ACK sequence, host order
*/
static void tcp_update_seqack_from_tap(const struct ctx *c,
struct tcp_tap_conn *conn, uint32_t seq)
{
tcp: Clear ACK_FROM_TAP_DUE also on unchanged ACK sequence from peer Since commit cc6d8286d104 ("tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer"), we don't clear ACK_FROM_TAP_DUE whenever we process an ACK segment, but, more correctly, only if we're really not waiting for a further ACK segment, that is, only if the acknowledged sequence matches what we sent. In the new function implementing this, tcp_update_seqack_from_tap(), we also reset the retransmission counter and store the updated ACK sequence. Both should be done iff forward progress is acknowledged, implied by the fact that the new ACK sequence is greater than the one we previously stored. At that point, it looked natural to also include the statements that clear and set the ACK_FROM_TAP_DUE flag inside the same conditional block: if we're not making forward progress, the need for an ACK, or lack thereof, should remain unchanged. There might be cases where this isn't true, though: without the previous commit 4e73e9bd655c ("tcp: Don't special case the handling of the ack of a syn"), this would happen if a tap-side client initiated a connection, and the server didn't send any data. At that point we would never, in the established state of the connection, call tcp_update_seqack_from_tap() with reported forward progress. That issue itself is fixed by the previous commit, now, but clearing ACK_FROM_TAP_DUE only on ACK sequence progress doesn't really follow any logic. Clear the ACK_FROM_TAP_DUE flag regardless of reported forward progress. If we clear it when it's already unset, conn_flag() will do nothing with it. This doesn't fix any known functional issue, rather a conceptual one. Fixes: cc6d8286d104 ("tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer") Reported-by: David Gibson <david@gibson.dropbear.id.au> Analysed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-03-23 16:07:57 +01:00
if (seq == conn->seq_to_tap)
conn_flag(c, conn, ~ACK_FROM_TAP_DUE);
tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer David reports that TCP transfers might stall, especially with smaller socket buffer sizes, because we reset the ACK_FROM_TAP_DUE flag, in tcp_tap_handler(), whenever we receive an ACK segment, regardless of its sequence number and the fact that we might still be waiting for one. This way, we might fail to re-transmit frames on ACK timeouts. We need, instead, to: - indicate with the @retrans field only re-transmissions for the same data sequences. If we make progress, it should be reset, given that it's used to abort a connection when we exceed a given number of re-transmissions for the same data - unset the ACK_FROM_TAP_DUE flag if and only if the acknowledged sequence is the same as the last one we sent, as suggested by David - keep it set otherwise, if progress was done but not all the data we sent was acknowledged, and update the expiration of the ACK timeout Add a new helper for these purposes, tcp_update_seqack_from_tap(). To extend the ACK timeout, the new helper sets the ACK_FROM_TAP_DUE flag, even if it was already set, and conn_flag_do() triggers a timer update. This part should be revisited at a later time, because, strictly speaking, ACK_FROM_TAP_DUE isn't a flag anymore. One possibility might be to introduce another connection attribute for events affecting timer deadlines. Reported-by: David Gibson <david@gibson.dropbear.id.au> Link: https://bugs.passt.top/show_bug.cgi?id=41 Suggested-by: David Gibson <david@gibson.dropbear.id.au> Fixes: be5bbb9b0681 ("tcp: Rework timers to use timerfd instead of periodic bitmap scan") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-02-12 22:26:55 +01:00
if (SEQ_GT(seq, conn->seq_ack_from_tap)) {
tcp: Clear ACK_FROM_TAP_DUE also on unchanged ACK sequence from peer Since commit cc6d8286d104 ("tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer"), we don't clear ACK_FROM_TAP_DUE whenever we process an ACK segment, but, more correctly, only if we're really not waiting for a further ACK segment, that is, only if the acknowledged sequence matches what we sent. In the new function implementing this, tcp_update_seqack_from_tap(), we also reset the retransmission counter and store the updated ACK sequence. Both should be done iff forward progress is acknowledged, implied by the fact that the new ACK sequence is greater than the one we previously stored. At that point, it looked natural to also include the statements that clear and set the ACK_FROM_TAP_DUE flag inside the same conditional block: if we're not making forward progress, the need for an ACK, or lack thereof, should remain unchanged. There might be cases where this isn't true, though: without the previous commit 4e73e9bd655c ("tcp: Don't special case the handling of the ack of a syn"), this would happen if a tap-side client initiated a connection, and the server didn't send any data. At that point we would never, in the established state of the connection, call tcp_update_seqack_from_tap() with reported forward progress. That issue itself is fixed by the previous commit, now, but clearing ACK_FROM_TAP_DUE only on ACK sequence progress doesn't really follow any logic. Clear the ACK_FROM_TAP_DUE flag regardless of reported forward progress. If we clear it when it's already unset, conn_flag() will do nothing with it. This doesn't fix any known functional issue, rather a conceptual one. Fixes: cc6d8286d104 ("tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer") Reported-by: David Gibson <david@gibson.dropbear.id.au> Analysed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-03-23 16:07:57 +01:00
/* Forward progress, but more data to acknowledge: reschedule */
if (SEQ_LT(seq, conn->seq_to_tap))
tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer David reports that TCP transfers might stall, especially with smaller socket buffer sizes, because we reset the ACK_FROM_TAP_DUE flag, in tcp_tap_handler(), whenever we receive an ACK segment, regardless of its sequence number and the fact that we might still be waiting for one. This way, we might fail to re-transmit frames on ACK timeouts. We need, instead, to: - indicate with the @retrans field only re-transmissions for the same data sequences. If we make progress, it should be reset, given that it's used to abort a connection when we exceed a given number of re-transmissions for the same data - unset the ACK_FROM_TAP_DUE flag if and only if the acknowledged sequence is the same as the last one we sent, as suggested by David - keep it set otherwise, if progress was done but not all the data we sent was acknowledged, and update the expiration of the ACK timeout Add a new helper for these purposes, tcp_update_seqack_from_tap(). To extend the ACK timeout, the new helper sets the ACK_FROM_TAP_DUE flag, even if it was already set, and conn_flag_do() triggers a timer update. This part should be revisited at a later time, because, strictly speaking, ACK_FROM_TAP_DUE isn't a flag anymore. One possibility might be to introduce another connection attribute for events affecting timer deadlines. Reported-by: David Gibson <david@gibson.dropbear.id.au> Link: https://bugs.passt.top/show_bug.cgi?id=41 Suggested-by: David Gibson <david@gibson.dropbear.id.au> Fixes: be5bbb9b0681 ("tcp: Rework timers to use timerfd instead of periodic bitmap scan") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-02-12 22:26:55 +01:00
conn_flag(c, conn, ACK_FROM_TAP_DUE);
conn->retrans = 0;
conn->seq_ack_from_tap = seq;
}
}
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
/**
* tcp_send_flag() - Send segment with flags to tap (no payload)
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* @c: Execution context
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* @conn: Connection pointer
* @flags: TCP flags: if not set, send segment only if ACK is due
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 11:33:38 +01:00
* Return: negative error code on connection reset, 0 otherwise
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*/
static int tcp_send_flag(struct ctx *c, struct tcp_tap_conn *conn, int flags)
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
{
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
uint32_t prev_ack_to_tap = conn->seq_ack_to_tap;
uint32_t prev_wnd_to_tap = conn->wnd_to_tap;
struct tcp4_l2_flags_buf_t *b4 = NULL;
struct tcp6_l2_flags_buf_t *b6 = NULL;
struct tcp_info tinfo = { 0 };
socklen_t sl = sizeof(tinfo);
int s = conn->sock;
size_t optlen = 0;
struct iovec *iov;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
struct tcphdr *th;
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
char *data;
void *p;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
if (SEQ_GE(conn->seq_ack_to_tap, conn->seq_from_tap) &&
!flags && conn->wnd_to_tap)
return 0;
if (getsockopt(s, SOL_TCP, TCP_INFO, &tinfo, &sl)) {
conn_event(c, conn, CLOSED);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
return -ECONNRESET;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}
#ifdef HAS_SND_WND
if (!c->tcp.kernel_snd_wnd && tinfo.tcpi_snd_wnd)
c->tcp.kernel_snd_wnd = 1;
#endif
if (!(conn->flags & LOCAL))
tcp_rtt_dst_check(conn, &tinfo);
if (!tcp_update_seqack_wnd(c, conn, flags, &tinfo) && !flags)
return 0;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
if (CONN_V4(conn)) {
iov = tcp4_l2_flags_iov + tcp4_l2_flags_buf_used;
p = b4 = tcp4_l2_flags_buf + tcp4_l2_flags_buf_used++;
th = &b4->th;
/* gcc 11.2 would complain on data = (char *)(th + 1); */
data = b4->opts;
} else {
iov = tcp6_l2_flags_iov + tcp6_l2_flags_buf_used;
p = b6 = tcp6_l2_flags_buf + tcp6_l2_flags_buf_used++;
th = &b6->th;
data = b6->opts;
}
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
if (flags & SYN) {
int mss;
/* Options: MSS, NOP and window scale (8 bytes) */
optlen = OPT_MSS_LEN + 1 + OPT_WS_LEN;
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 11:33:38 +01:00
*data++ = OPT_MSS;
*data++ = OPT_MSS_LEN;
if (c->mtu == -1) {
mss = tinfo.tcpi_snd_mss;
} else {
mss = c->mtu - sizeof(struct tcphdr);
if (CONN_V4(conn))
mss -= sizeof(struct iphdr);
else
mss -= sizeof(struct ipv6hdr);
if (c->low_wmem &&
!(conn->flags & LOCAL) && !tcp_rtt_dst_low(conn))
mss = MIN(mss, PAGE_SIZE);
else if (mss > PAGE_SIZE)
mss = ROUND_DOWN(mss, PAGE_SIZE);
}
*(uint16_t *)data = htons(MIN(USHRT_MAX, mss));
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 11:33:38 +01:00
data += OPT_MSS_LEN - 2;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
conn->ws_to_tap = MIN(MAX_WS, tinfo.tcpi_snd_wscale);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
*data++ = OPT_NOP;
*data++ = OPT_WS;
*data++ = OPT_WS_LEN;
*data++ = conn->ws_to_tap;
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
th->ack = !!(flags & ACK);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
} else {
th->ack = !!(flags & (ACK | DUP_ACK)) ||
conn->seq_ack_to_tap != prev_ack_to_tap ||
!prev_wnd_to_tap;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}
th->doff = (sizeof(*th) + optlen) / 4;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
th->rst = !!(flags & RST);
th->syn = !!(flags & SYN);
th->fin = !!(flags & FIN);
iov->iov_len = tcp_l2_buf_fill_headers(c, conn, p, optlen,
NULL, conn->seq_to_tap);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
tcp: Don't reset ACK_TO_TAP_DUE on any ACK, reschedule timer as needed This is mostly symmetric with commit cc6d8286d104 ("tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer"): we shouldn't reset the ACK_TO_TAP_DUE flag on any inbound ACK segment, but only once we acknowledge everything we received from the guest or the container. If we don't, a client might unnecessarily hold off further data, especially during slow start, and in general we won't converge to the usable bandwidth. This is very visible especially with traffic tests on links with non-negligible latency, such as in the reported issue. There, a public iperf3 server sometimes aborts the test due do what appears to be a low iperf3's --rcv-timeout (probably less than a second). Even if this doesn't happen, the throughput will converge to a fraction of the usable bandwidth. Clear ACK_TO_TAP_DUE if we acknowledged everything, set it if we didn't, and reschedule the timer in case the flag is still set as the timer expires. While at it, decrease the ACK timer interval to 10ms. A 50ms interval is short enough for any bandwidth-delay product I had in mind (local connections, or non-local connections with limited bandwidth), but here I am, testing 1gbps transfers to a peer with 100ms RTT. Indeed, we could eventually make the timer interval dependent on the current window and estimated bandwidth-delay product, but at least for the moment being, 10ms should be long enough to avoid any measurable syscall overhead, yet usable for any real-world application. Reported-by: Lukas Mrtvy <lukas.mrtvy@gmail.com> Link: https://bugs.passt.top/show_bug.cgi?id=44 Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-03-21 23:14:58 +01:00
if (th->ack) {
if (SEQ_GE(conn->seq_ack_to_tap, conn->seq_from_tap))
conn_flag(c, conn, ~ACK_TO_TAP_DUE);
else
conn_flag(c, conn, ACK_TO_TAP_DUE);
}
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
if (th->fin)
conn_flag(c, conn, ACK_FROM_TAP_DUE);
/* RFC 793, 3.1: "[...] and the first data octet is ISN+1." */
if (th->fin || th->syn)
conn->seq_to_tap++;
if (CONN_V4(conn)) {
if (flags & DUP_ACK) {
memcpy(b4 + 1, b4, sizeof(*b4));
(iov + 1)->iov_len = iov->iov_len;
tcp4_l2_flags_buf_used++;
}
if (tcp4_l2_flags_buf_used > ARRAY_SIZE(tcp4_l2_flags_buf) - 2)
tcp_l2_flags_buf_flush(c);
} else {
if (flags & DUP_ACK) {
memcpy(b6 + 1, b6, sizeof(*b6));
(iov + 1)->iov_len = iov->iov_len;
tcp6_l2_flags_buf_used++;
}
if (tcp6_l2_flags_buf_used > ARRAY_SIZE(tcp6_l2_flags_buf) - 2)
tcp_l2_flags_buf_flush(c);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
}
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
return 0;
}
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
/**
* tcp_rst_do() - Reset a tap connection: send RST segment to tap, close socket
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* @c: Execution context
* @conn: Connection pointer
*/
static void tcp_rst_do(struct ctx *c, struct tcp_tap_conn *conn)
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
{
if (conn->events == CLOSED)
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
return;
if (!tcp_send_flag(c, conn, RST))
conn_event(c, conn, CLOSED);
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
}
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
/**
* tcp_get_tap_ws() - Get Window Scaling option for connection from tap/guest
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* @conn: Connection pointer
* @opts: Pointer to start of TCP options
* @optlen: Bytes in options: caller MUST ensure available length
*/
static void tcp_get_tap_ws(struct tcp_tap_conn *conn,
const char *opts, size_t optlen)
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
{
int ws = tcp_opt_get(opts, optlen, OPT_WS, NULL, NULL);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
if (ws >= 0 && ws <= TCP_WS_MAX)
conn->ws_from_tap = ws;
else
conn->ws_from_tap = 0;
}
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 11:33:38 +01:00
/**
* tcp_tap_window_update() - Process an updated window from tap side
* @conn: Connection pointer
* @window: Window value, host order, unscaled
*/
tcp: Don't use TCP_WINDOW_CLAMP On the L2 tap side, we see TCP headers and know the TCP window that the ultimate receiver is advertising. In order to avoid unnecessary buffering within passt/pasta (or by the kernel on passt/pasta's behalf) we attempt to advertise that window back to the original sock-side sender using TCP_WINDOW_CLAMP. However, TCP_WINDOW_CLAMP just doesn't work like this. Prior to kernel commit 3aa7857fe1d7 ("tcp: enable mid stream window clamp"), it simply had no effect on established sockets. After that commit, it does affect established sockets but doesn't behave the way we need: * It appears to be designed only to shrink the window, not to allow it to re-expand. * More importantly, that commit has a serious bug where if the setsockopt() is made when the existing kernel advertised window for the socket happens to be zero, it will now become locked at zero, stopping any further data from being received on the socket. Since this has never worked as intended, simply remove it. It might be possible to re-implement the intended behaviour by manipulating SO_RCVBUF, so we leave a comment to that effect. This kernel bug is the underlying cause of both the linked passt bug and the linked podman bug. We attempted to fix this before with passt commit d3192f67 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag"). However while that commit masked the bug for some cases, it didn't really address the problem. Fixes: d3192f67c492 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag") Link: https://github.com/containers/podman/issues/20170 Link: https://bugs.passt.top/show_bug.cgi?id=74 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-09 10:54:00 +01:00
static void tcp_tap_window_update(struct tcp_tap_conn *conn, unsigned wnd)
{
wnd = MIN(MAX_WINDOW, wnd << conn->ws_from_tap);
conn->wnd_from_tap = MIN(wnd >> conn->ws_from_tap, USHRT_MAX);
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
tcp: Don't use TCP_WINDOW_CLAMP On the L2 tap side, we see TCP headers and know the TCP window that the ultimate receiver is advertising. In order to avoid unnecessary buffering within passt/pasta (or by the kernel on passt/pasta's behalf) we attempt to advertise that window back to the original sock-side sender using TCP_WINDOW_CLAMP. However, TCP_WINDOW_CLAMP just doesn't work like this. Prior to kernel commit 3aa7857fe1d7 ("tcp: enable mid stream window clamp"), it simply had no effect on established sockets. After that commit, it does affect established sockets but doesn't behave the way we need: * It appears to be designed only to shrink the window, not to allow it to re-expand. * More importantly, that commit has a serious bug where if the setsockopt() is made when the existing kernel advertised window for the socket happens to be zero, it will now become locked at zero, stopping any further data from being received on the socket. Since this has never worked as intended, simply remove it. It might be possible to re-implement the intended behaviour by manipulating SO_RCVBUF, so we leave a comment to that effect. This kernel bug is the underlying cause of both the linked passt bug and the linked podman bug. We attempted to fix this before with passt commit d3192f67 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag"). However while that commit masked the bug for some cases, it didn't really address the problem. Fixes: d3192f67c492 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag") Link: https://github.com/containers/podman/issues/20170 Link: https://bugs.passt.top/show_bug.cgi?id=74 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-09 10:54:00 +01:00
/* FIXME: reflect the tap-side receiver's window back to the sock-side
* sender by adjusting SO_RCVBUF? */
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}
/**
* tcp_seq_init() - Calculate initial sequence number according to RFC 6528
* @c: Execution context
* @conn: TCP connection, with faddr, fport and eport populated
udp: Connection tracking for ephemeral, local ports, and related fixes As we support UDP forwarding for packets that are sent to local ports, we actually need some kind of connection tracking for UDP. While at it, this commit introduces a number of vaguely related fixes for issues observed while trying this out. In detail: - implement an explicit, albeit minimalistic, connection tracking for UDP, to allow usage of ephemeral ports by the guest and by the host at the same time, by binding them dynamically as needed, and to allow mapping address changes for packets with a loopback address as destination - set the guest MAC address whenever we receive a packet from tap instead of waiting for an ARP request, and set it to broadcast on start, otherwise DHCPv6 might not work if all DHCPv6 requests time out before the guest starts talking IPv4 - split context IPv6 address into address we assign, global or site address seen on tap, and link-local address seen on tap, and make sure we use the addresses we've seen as destination (link-local choice depends on source address). Similarly, for IPv4, split into address we assign and address we observe, and use the address we observe as destination - introduce a clock_gettime() syscall right after epoll_wait() wakes up, so that we can remove all the other ones and pass the current timestamp to tap and socket handlers -- this is additionally needed by UDP to time out bindings to ephemeral ports and mappings between loopback address and a local address - rename sock_l4_add() to sock_l4(), no semantic changes intended - include <arpa/inet.h> in passt.c before kernel headers so that we can use <netinet/in.h> macros to check IPv6 address types, and remove a duplicate <linux/ip.h> inclusion Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-04-29 16:59:20 +02:00
* @now: Current timestamp
*/
static void tcp_seq_init(const struct ctx *c, struct tcp_tap_conn *conn,
const struct timespec *now)
{
struct siphash_state state = SIPHASH_INIT(c->hash_secret);
union inany_addr aany;
uint64_t hash;
uint32_t ns;
if (CONN_V4(conn))
inany_from_af(&aany, AF_INET, &c->ip4.addr);
else
inany_from_af(&aany, AF_INET6, &c->ip6.addr);
inany_siphash_feed(&state, &conn->faddr);
inany_siphash_feed(&state, &aany);
hash = siphash_final(&state, 36,
(uint64_t)conn->fport << 16 | conn->eport);
/* 32ns ticks, overflows 32 bits every 137s */
ns = (now->tv_sec * 1000000000 + now->tv_nsec) >> 5;
conn->seq_to_tap = ((uint32_t)(hash >> 32) ^ (uint32_t)hash) + ns;
}
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
/**
* tcp_conn_pool_sock() - Get socket for new connection from pre-opened pool
* @pool: Pool of pre-opened sockets
*
* Return: socket number if available, negative code if pool is empty
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*/
int tcp_conn_pool_sock(int pool[])
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
{
int s = -1, i;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
for (i = 0; i < TCP_SOCK_POOL_SIZE; i++) {
SWAP(s, pool[i]);
if (s >= 0)
return s;
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
}
return -1;
}
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
/**
* tcp_conn_new_sock() - Open and prepare new socket for connection
* @c: Execution context
* @af: Address family
*
* Return: socket number on success, negative code if socket creation failed
*/
int tcp_conn_new_sock(const struct ctx *c, sa_family_t af)
{
int s;
s = socket(af, SOCK_STREAM | SOCK_NONBLOCK, IPPROTO_TCP);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
if (s > FD_REF_MAX) {
close(s);
return -EIO;
}
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
if (s < 0)
return -errno;
tcp_sock_set_bufsize(c, s);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
return s;
}
/**
* tcp_conn_tap_mss() - Get MSS value advertised by tap/guest
* @conn: Connection pointer
* @opts: Pointer to start of TCP options
* @optlen: Bytes in options: caller MUST ensure available length
*
* Return: clamped MSS value
*/
tcp: Clamp MSS value when queueing data to tap, also for pasta Tom reports that a pattern of repated ~1 MiB chunks downloads over NNTP over TLS, on Podman 4.4 using pasta as network back-end, results in pasta taking one full CPU thread after a while, and the download never succeeds. On that setup, we end up re-sending the same frame over and over, with a consistent 65 534 bytes size, and never get an acknowledgement from the tap-side client. This only happens for the default MTU value (65 520 bytes) or for values that are slightly smaller than that (down to 64 499 bytes). We hit this condition because the MSS value we use in tcp_data_from_sock(), only in pasta mode, is simply clamped to USHRT_MAX, and not to the actual size of the buffers we pre-cooked for sending, which is a bit less than that. It looks like we got away with it until commit 0fb7b2b9080a ("tap: Use different io vector bases depending on tap type") fixed the setting of iov_len. Luckily, since it's pasta, we're queueing up to two frames at a time, so the worst that can happen is a badly segmented TCP stream: we always have some space at the tail of the buffer. Clamp the MSS value to the appropriate maximum given by struct tcp{4,6}_buf_data_t, no matter if we're running in pasta or passt mode. While at it, fix the comments to those structs to reflect the current struct size. This is not really relevant for any further calculation or consideration, but it's convenient to know while debugging this kind of issues. Thanks to Tom for reporting the issue in a very detailed way and for providing a test setup. Reported-by: Tom Mombourquette <tom@devnode.com> Link: https://github.com/containers/podman/issues/17703 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 18:07:42 +01:00
static uint16_t tcp_conn_tap_mss(const struct tcp_tap_conn *conn,
const char *opts, size_t optlen)
{
unsigned int mss;
int ret;
if ((ret = tcp_opt_get(opts, optlen, OPT_MSS, NULL, NULL)) < 0)
mss = MSS_DEFAULT;
else
mss = ret;
tcp: Clamp MSS value when queueing data to tap, also for pasta Tom reports that a pattern of repated ~1 MiB chunks downloads over NNTP over TLS, on Podman 4.4 using pasta as network back-end, results in pasta taking one full CPU thread after a while, and the download never succeeds. On that setup, we end up re-sending the same frame over and over, with a consistent 65 534 bytes size, and never get an acknowledgement from the tap-side client. This only happens for the default MTU value (65 520 bytes) or for values that are slightly smaller than that (down to 64 499 bytes). We hit this condition because the MSS value we use in tcp_data_from_sock(), only in pasta mode, is simply clamped to USHRT_MAX, and not to the actual size of the buffers we pre-cooked for sending, which is a bit less than that. It looks like we got away with it until commit 0fb7b2b9080a ("tap: Use different io vector bases depending on tap type") fixed the setting of iov_len. Luckily, since it's pasta, we're queueing up to two frames at a time, so the worst that can happen is a badly segmented TCP stream: we always have some space at the tail of the buffer. Clamp the MSS value to the appropriate maximum given by struct tcp{4,6}_buf_data_t, no matter if we're running in pasta or passt mode. While at it, fix the comments to those structs to reflect the current struct size. This is not really relevant for any further calculation or consideration, but it's convenient to know while debugging this kind of issues. Thanks to Tom for reporting the issue in a very detailed way and for providing a test setup. Reported-by: Tom Mombourquette <tom@devnode.com> Link: https://github.com/containers/podman/issues/17703 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 18:07:42 +01:00
if (CONN_V4(conn))
mss = MIN(MSS4, mss);
else
mss = MIN(MSS6, mss);
return MIN(mss, USHRT_MAX);
}
conf, icmp, tcp, udp: Add options to bind to outbound address and interface I didn't notice earlier: libslirp (and slirp4netns) supports binding outbound sockets to specific IPv4 and IPv6 addresses, to force the source addresse selection. If we want to claim feature parity, we should implement that as well. Further, Podman supports specifying outbound interfaces as well, but this is simply done by resolving the primary address for an interface when the network back-end is started. However, since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can actually bind to a specific interface name, which doesn't need to be validated in advance. Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses, and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets to given interfaces. Given that it probably makes little sense to select addresses and routes from interfaces different than the ones given for outbound sockets, also assign those as "template" interfaces, by default, unless explicitly overridden by '-i'. For ICMP and UDP, we call sock_l4() to open outbound sockets, as we already needed to bind to given ports or echo identifiers, and we can bind() a socket only once: there, pass address (if any) and interface (if any) for the existing bind() and setsockopt() calls. For TCP, in general, we wouldn't otherwise bind sockets. Add a specific helper to do that. For UDP outbound sockets, we need to know if the final destination of the socket is a loopback address, before we decide whether it makes sense to bind the socket at all: move the block mangling the address destination before the creation of the socket in the IPv4 path. This was already the case for the IPv6 path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 03:29:51 +01:00
/**
* tcp_bind_outbound() - Bind socket to outbound address and interface if given
* @c: Execution context
* @s: Outbound TCP socket
* @af: Address family
*/
static void tcp_bind_outbound(const struct ctx *c, int s, sa_family_t af)
{
if (af == AF_INET) {
if (!IN4_IS_ADDR_UNSPECIFIED(&c->ip4.addr_out)) {
struct sockaddr_in addr4 = {
.sin_family = AF_INET,
.sin_port = 0,
.sin_addr = c->ip4.addr_out,
};
if (bind(s, (struct sockaddr *)&addr4, sizeof(addr4))) {
debug("Can't bind IPv4 TCP socket address: %s",
strerror(errno));
}
}
if (*c->ip4.ifname_out) {
if (setsockopt(s, SOL_SOCKET, SO_BINDTODEVICE,
c->ip4.ifname_out,
strlen(c->ip4.ifname_out))) {
debug("Can't bind IPv4 TCP socket to interface:"
" %s", strerror(errno));
}
}
} else if (af == AF_INET6) {
if (!IN6_IS_ADDR_UNSPECIFIED(&c->ip6.addr_out)) {
struct sockaddr_in6 addr6 = {
.sin6_family = AF_INET6,
.sin6_port = 0,
.sin6_addr = c->ip6.addr_out,
};
if (bind(s, (struct sockaddr *)&addr6, sizeof(addr6))) {
debug("Can't bind IPv6 TCP socket address: %s",
strerror(errno));
}
}
if (*c->ip6.ifname_out) {
if (setsockopt(s, SOL_SOCKET, SO_BINDTODEVICE,
c->ip6.ifname_out,
strlen(c->ip6.ifname_out))) {
debug("Can't bind IPv6 TCP socket to interface:"
" %s", strerror(errno));
}
}
}
}
/**
* tcp_conn_from_tap() - Handle connection request (SYN segment) from tap
* @c: Execution context
* @af: Address family, AF_INET or AF_INET6
* @saddr: Source address, pointer to in_addr or in6_addr
* @daddr: Destination address, pointer to in_addr or in6_addr
* @th: TCP header from tap: caller MUST ensure it's there
* @opts: Pointer to start of options
* @optlen: Bytes in options: caller MUST ensure available length
* @now: Current timestamp
*/
static void tcp_conn_from_tap(struct ctx *c,
int af, const void *saddr, const void *daddr,
const struct tcphdr *th, const char *opts,
size_t optlen, const struct timespec *now)
{
int *pool = af == AF_INET6 ? init_sock_pool6 : init_sock_pool4;
struct sockaddr_in addr4 = {
.sin_family = AF_INET,
.sin_port = th->dest,
.sin_addr = *(struct in_addr *)daddr,
};
struct sockaddr_in6 addr6 = {
.sin6_family = AF_INET6,
.sin6_port = th->dest,
.sin6_addr = *(struct in6_addr *)daddr,
};
const struct sockaddr *sa;
struct tcp_tap_conn *conn;
socklen_t sl;
int s, mss;
(void)saddr;
if (c->flow_count >= FLOW_MAX)
return;
if ((s = tcp_conn_pool_sock(pool)) < 0)
if ((s = tcp_conn_new_sock(c, af)) < 0)
return;
if (!c->no_map_gw) {
if (af == AF_INET && IN4_ARE_ADDR_EQUAL(daddr, &c->ip4.gw))
addr4.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
if (af == AF_INET6 && IN6_ARE_ADDR_EQUAL(daddr, &c->ip6.gw))
addr6.sin6_addr = in6addr_loopback;
}
if (af == AF_INET6 && IN6_IS_ADDR_LINKLOCAL(&addr6.sin6_addr)) {
struct sockaddr_in6 addr6_ll = {
.sin6_family = AF_INET6,
.sin6_addr = c->ip6.addr_ll,
.sin6_scope_id = c->ifi6,
};
if (bind(s, (struct sockaddr *)&addr6_ll, sizeof(addr6_ll))) {
close(s);
return;
}
}
conn = CONN(c->flow_count++);
conn->f.type = FLOW_TCP;
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
conn->sock = s;
conn->timer = -1;
conn_event(c, conn, TAP_SYN_RCVD);
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
conn->wnd_to_tap = WINDOW_DEFAULT;
tcp: Clamp MSS value when queueing data to tap, also for pasta Tom reports that a pattern of repated ~1 MiB chunks downloads over NNTP over TLS, on Podman 4.4 using pasta as network back-end, results in pasta taking one full CPU thread after a while, and the download never succeeds. On that setup, we end up re-sending the same frame over and over, with a consistent 65 534 bytes size, and never get an acknowledgement from the tap-side client. This only happens for the default MTU value (65 520 bytes) or for values that are slightly smaller than that (down to 64 499 bytes). We hit this condition because the MSS value we use in tcp_data_from_sock(), only in pasta mode, is simply clamped to USHRT_MAX, and not to the actual size of the buffers we pre-cooked for sending, which is a bit less than that. It looks like we got away with it until commit 0fb7b2b9080a ("tap: Use different io vector bases depending on tap type") fixed the setting of iov_len. Luckily, since it's pasta, we're queueing up to two frames at a time, so the worst that can happen is a badly segmented TCP stream: we always have some space at the tail of the buffer. Clamp the MSS value to the appropriate maximum given by struct tcp{4,6}_buf_data_t, no matter if we're running in pasta or passt mode. While at it, fix the comments to those structs to reflect the current struct size. This is not really relevant for any further calculation or consideration, but it's convenient to know while debugging this kind of issues. Thanks to Tom for reporting the issue in a very detailed way and for providing a test setup. Reported-by: Tom Mombourquette <tom@devnode.com> Link: https://github.com/containers/podman/issues/17703 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 18:07:42 +01:00
mss = tcp_conn_tap_mss(conn, opts, optlen);
if (setsockopt(s, SOL_TCP, TCP_MAXSEG, &mss, sizeof(mss)))
flow_trace(conn, "failed to set TCP_MAXSEG on socket %i", s);
MSS_SET(conn, mss);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
tcp_get_tap_ws(conn, opts, optlen);
/* RFC 7323, 2.2: first value is not scaled. Also, don't clamp yet, to
* avoid getting a zero scale just because we set a small window now.
*/
if (!(conn->wnd_from_tap = (htons(th->window) >> conn->ws_from_tap)))
conn->wnd_from_tap = 1;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
inany_from_af(&conn->faddr, af, daddr);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
if (af == AF_INET) {
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 11:33:38 +01:00
sa = (struct sockaddr *)&addr4;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
sl = sizeof(addr4);
} else {
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 11:33:38 +01:00
sa = (struct sockaddr *)&addr6;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
sl = sizeof(addr6);
}
conn->fport = ntohs(th->dest);
conn->eport = ntohs(th->source);
passt: Assorted fixes from "fresh eyes" review A bunch of fixes not worth single commits at this stage, notably: - make buffer, length parameter ordering consistent in ARP, DHCP, NDP handlers - strict checking of buffer, message and option length in DHCP handler (a malicious client could have easily crashed it) - set up forwarding for IPv4 and IPv6, and masquerading with nft for IPv4, from demo script - get rid of separate slow and fast timers, we don't save any overhead that way - stricter checking of buffer lengths as passed to tap handlers - proper dequeuing from qemu socket back-end: I accidentally trashed messages that were bundled up together in a single tap read operation -- the length header tells us what's the size of the next frame, but there's no apparent limit to the number of messages we get with one single receive - rework some bits of the TCP state machine, now passive and active connection closes appear to be robust -- introduce a new FIN_WAIT_1_SOCK_FIN state indicating a FIN_WAIT_1 with a FIN flag from socket - streamline TCP option parsing routine - track TCP state changes to stderr (this is temporary, proper debugging and syslogging support pending) - observe that multiplying a number by four might very well change its value, and this happens to be the case for the data offset from the TCP header as we check if it's the same as the total length to find out if it's a duplicated ACK segment - recent estimates suggest that the duration of a millisecond is closer to a million nanoseconds than a thousand of them, this trend is now reflected into the timespec_diff_ms() convenience routine Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-21 11:33:38 +01:00
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
conn->seq_init_from_tap = ntohl(th->seq);
conn->seq_from_tap = conn->seq_init_from_tap + 1;
conn->seq_ack_to_tap = conn->seq_from_tap;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
tcp_seq_init(c, conn, now);
tcp: Don't special case the handling of the ack of a syn TCP treats the SYN packets as though they occupied 1 byte in the logical data stream described by the sequence numbers. That is, the very first ACK (or SYN-ACK) each side sends should acknowledge a sequence number one greater than the initial sequence number given in the SYN or SYN-ACK it's responding to. In passt we were tracking that by advancing conn->seq_to_tap by one when we send a SYN or SYN-ACK (in tcp_send_flag()). However, we also initialized conn->seq_ack_from_tap, representing the acks we've already seen from the tap side, to ISN+1, meaning we treated it has having acknowledged the SYN before it actually did. There were apparently reasons for this in earlier versions, but it causes problems now. Because of this when we actually did receive the initial ACK or SYN-ACK, we wouldn't see the acknoweldged serial number as advancing, and so wouldn't clear the ACK_FROM_TAP_DUE flag. In most cases we'd get away because subsequent packets would clear the flag. However if one (or both) sides didn't send any data, the other side would (correctly) keep sending ISN+1 as the acknowledged sequence number, meaning we would never clear the ACK_FROM_TAP_DUE flag. That would mean we'd treat the connection as if we needed to retransmit (although we had 0 bytes to retransmit), and eventaully (after around 30s) reset the connection due to too many retransmits. Specifically this could cause the iperf3 throughput tests in the testsuite to fail if set for a long enough test period. Correct this by initializing conn->seq_ack_from_tap to the ISN and only advancing it when we actually get the first ACK (or SYN-ACK). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-03-27 05:56:34 +02:00
conn->seq_ack_from_tap = conn->seq_to_tap;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
tcp_hash_insert(c, conn);
if (!bind(s, sa, sl)) {
tcp_rst(c, conn); /* Nobody is listening then */
return;
}
if (errno != EADDRNOTAVAIL && errno != EACCES)
conn_flag(c, conn, LOCAL);
conf, icmp, tcp, udp: Add options to bind to outbound address and interface I didn't notice earlier: libslirp (and slirp4netns) supports binding outbound sockets to specific IPv4 and IPv6 addresses, to force the source addresse selection. If we want to claim feature parity, we should implement that as well. Further, Podman supports specifying outbound interfaces as well, but this is simply done by resolving the primary address for an interface when the network back-end is started. However, since kernel version 5.7, commit c427bfec18f2 ("net: core: enable SO_BINDTODEVICE for non-root users"), we can actually bind to a specific interface name, which doesn't need to be validated in advance. Implement -o / --outbound ADDR to bind to IPv4 and IPv6 addresses, and --outbound-if4 and --outbound-if6 to bind IPv4 and IPv6 sockets to given interfaces. Given that it probably makes little sense to select addresses and routes from interfaces different than the ones given for outbound sockets, also assign those as "template" interfaces, by default, unless explicitly overridden by '-i'. For ICMP and UDP, we call sock_l4() to open outbound sockets, as we already needed to bind to given ports or echo identifiers, and we can bind() a socket only once: there, pass address (if any) and interface (if any) for the existing bind() and setsockopt() calls. For TCP, in general, we wouldn't otherwise bind sockets. Add a specific helper to do that. For UDP outbound sockets, we need to know if the final destination of the socket is a loopback address, before we decide whether it makes sense to bind the socket at all: move the block mangling the address destination before the creation of the socket in the IPv4 path. This was already the case for the IPv6 path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 03:29:51 +01:00
if ((af == AF_INET && !IN4_IS_ADDR_LOOPBACK(&addr4.sin_addr)) ||
(af == AF_INET6 && !IN6_IS_ADDR_LOOPBACK(&addr6.sin6_addr) &&
!IN6_IS_ADDR_LINKLOCAL(&addr6.sin6_addr)))
tcp_bind_outbound(c, s, af);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
if (connect(s, sa, sl)) {
if (errno != EINPROGRESS) {
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
tcp_rst(c, conn);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
return;
}
tcp_get_sndbuf(conn);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
} else {
tcp_get_sndbuf(conn);
if (tcp_send_flag(c, conn, SYN | ACK))
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
return;
conn_event(c, conn, TAP_SYN_ACK_SENT);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}
tcp_epoll_ctl(c, conn);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}
/**
* tcp_sock_consume() - Consume (discard) data from buffer
* @conn: Connection pointer
* @ack_seq: ACK sequence, host order
*
* Return: 0 on success, negative error code from recv() on failure
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*/
#ifdef VALGRIND
/* valgrind doesn't realise that passing a NULL buffer to recv() is ok if using
* MSG_TRUNC. We have a suppression for this in the tests, but it relies on
* valgrind being able to see the tcp_sock_consume() stack frame, which it won't
* if this gets inlined. This has a single caller making it a likely inlining
* candidate, and certain compiler versions will do so even at -O0.
*/
__attribute__((noinline))
#endif /* VALGRIND */
static int tcp_sock_consume(const struct tcp_tap_conn *conn, uint32_t ack_seq)
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
{
/* Simply ignore out-of-order ACKs: we already consumed the data we
* needed from the buffer, and we won't rewind back to a lower ACK
* sequence.
*/
if (SEQ_LE(ack_seq, conn->seq_ack_from_tap))
return 0;
/* cppcheck-suppress [nullPointer, unmatchedSuppression] */
if (recv(conn->sock, NULL, ack_seq - conn->seq_ack_from_tap,
MSG_DONTWAIT | MSG_TRUNC) < 0)
return -errno;
return 0;
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
}
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
/**
* tcp_data_to_tap() - Finalise (queue) highest-numbered scatter-gather buffer
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* @c: Execution context
* @conn: Connection pointer
* @plen: Payload length at L4
* @no_csum: Don't compute IPv4 checksum, use the one from previous buffer
* @seq: Sequence number to be sent
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
*/
static void tcp_data_to_tap(const struct ctx *c, struct tcp_tap_conn *conn,
ssize_t plen, int no_csum, uint32_t seq)
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
{
uint32_t *seq_update = &conn->seq_to_tap;
struct iovec *iov;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
if (CONN_V4(conn)) {
struct tcp4_l2_buf_t *b = &tcp4_l2_buf[tcp4_l2_buf_used];
const uint16_t *check = no_csum ? &(b - 1)->iph.check : NULL;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
tcp4_l2_buf_seq_update[tcp4_l2_buf_used].seq = seq_update;
tcp4_l2_buf_seq_update[tcp4_l2_buf_used].len = plen;
iov = tcp4_l2_iov + tcp4_l2_buf_used++;
iov->iov_len = tcp_l2_buf_fill_headers(c, conn, b, plen,
check, seq);
if (tcp4_l2_buf_used > ARRAY_SIZE(tcp4_l2_buf) - 1)
tcp_l2_data_buf_flush(c);
} else if (CONN_V6(conn)) {
struct tcp6_l2_buf_t *b = &tcp6_l2_buf[tcp6_l2_buf_used];
tcp6_l2_buf_seq_update[tcp6_l2_buf_used].seq = seq_update;
tcp6_l2_buf_seq_update[tcp6_l2_buf_used].len = plen;
iov = tcp6_l2_iov + tcp6_l2_buf_used++;
iov->iov_len = tcp_l2_buf_fill_headers(c, conn, b, plen,
NULL, seq);
if (tcp6_l2_buf_used > ARRAY_SIZE(tcp6_l2_buf) - 1)
tcp_l2_data_buf_flush(c);
}
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}
/**
* tcp_data_from_sock() - Handle new data from socket, queue to tap, in window
* @c: Execution context
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* @conn: Connection pointer
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*
* Return: negative on connection reset, 0 otherwise
*
* #syscalls recvmsg
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*/
static int tcp_data_from_sock(struct ctx *c, struct tcp_tap_conn *conn)
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
{
uint32_t wnd_scaled = conn->wnd_from_tap << conn->ws_from_tap;
int fill_bufs, send_bufs = 0, last_len, iov_rem = 0;
int sendlen, len, plen, v4 = CONN_V4(conn);
int s = conn->sock, i, ret = 0;
struct msghdr mh_sock = { 0 };
uint16_t mss = MSS_GET(conn);
uint32_t already_sent, seq;
struct iovec *iov;
already_sent = conn->seq_to_tap - conn->seq_ack_from_tap;
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
if (SEQ_LT(already_sent, 0)) {
/* RFC 761, section 2.1. */
flow_trace(conn, "ACK sequence gap: ACK for %u, sent: %u",
conn->seq_ack_from_tap, conn->seq_to_tap);
conn->seq_to_tap = conn->seq_ack_from_tap;
already_sent = 0;
}
if (!wnd_scaled || already_sent >= wnd_scaled) {
conn_flag(c, conn, STALLED);
conn_flag(c, conn, ACK_FROM_TAP_DUE);
return 0;
}
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
/* Set up buffer descriptors we'll fill completely and partially. */
fill_bufs = DIV_ROUND_UP(wnd_scaled - already_sent, mss);
if (fill_bufs > TCP_FRAMES) {
fill_bufs = TCP_FRAMES;
iov_rem = 0;
} else {
iov_rem = (wnd_scaled - already_sent) % mss;
}
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
mh_sock.msg_iov = iov_sock;
mh_sock.msg_iovlen = fill_bufs + 1;
iov_sock[0].iov_base = tcp_buf_discard;
iov_sock[0].iov_len = already_sent;
if (( v4 && tcp4_l2_buf_used + fill_bufs > ARRAY_SIZE(tcp4_l2_buf)) ||
(!v4 && tcp6_l2_buf_used + fill_bufs > ARRAY_SIZE(tcp6_l2_buf))) {
tcp_l2_data_buf_flush(c);
/* Silence Coverity CWE-125 false positive */
tcp4_l2_buf_used = tcp6_l2_buf_used = 0;
}
for (i = 0, iov = iov_sock + 1; i < fill_bufs; i++, iov++) {
if (v4)
iov->iov_base = &tcp4_l2_buf[tcp4_l2_buf_used + i].data;
else
iov->iov_base = &tcp6_l2_buf[tcp6_l2_buf_used + i].data;
iov->iov_len = mss;
}
if (iov_rem)
iov_sock[fill_bufs].iov_len = iov_rem;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
/* Receive into buffers, don't dequeue until acknowledged by guest. */
do
len = recvmsg(s, &mh_sock, MSG_PEEK);
while (len < 0 && errno == EINTR);
if (len < 0)
goto err;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
if (!len) {
if ((conn->events & (SOCK_FIN_RCVD | TAP_FIN_SENT)) == SOCK_FIN_RCVD) {
if ((ret = tcp_send_flag(c, conn, FIN | ACK))) {
tcp_rst(c, conn);
return ret;
}
conn_event(c, conn, TAP_FIN_SENT);
}
return 0;
}
sendlen = len - already_sent;
if (sendlen <= 0) {
conn_flag(c, conn, STALLED);
return 0;
}
conn_flag(c, conn, ~STALLED);
send_bufs = DIV_ROUND_UP(sendlen, mss);
last_len = sendlen - (send_bufs - 1) * mss;
/* Likely, some new data was acked too. */
tcp_update_seqack_wnd(c, conn, 0, NULL);
/* Finally, queue to tap */
plen = mss;
seq = conn->seq_to_tap;
for (i = 0; i < send_bufs; i++) {
int no_csum = i && i != send_bufs - 1 && tcp4_l2_buf_used;
if (i == send_bufs - 1)
plen = last_len;
tcp_data_to_tap(c, conn, plen, no_csum, seq);
seq += plen;
}
conn_flag(c, conn, ACK_FROM_TAP_DUE);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
return 0;
err:
if (errno != EAGAIN && errno != EWOULDBLOCK) {
ret = -errno;
tcp_rst(c, conn);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}
return ret;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}
/**
* tcp_data_from_tap() - tap/guest data for established connection
* @c: Execution context
* @conn: Connection pointer
* @p: Pool of TCP packets, with TCP headers
* @idx: Index of first data packet in pool
*
* #syscalls sendmsg
*
* Return: count of consumed packets
*/
static int tcp_data_from_tap(struct ctx *c, struct tcp_tap_conn *conn,
const struct pool *p, int idx)
{
int i, iov_i, ack = 0, fin = 0, retr = 0, keep = -1, partial_send = 0;
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
uint16_t max_ack_seq_wnd = conn->wnd_from_tap;
uint32_t max_ack_seq = conn->seq_ack_from_tap;
uint32_t seq_from_tap = conn->seq_from_tap;
struct msghdr mh = { .msg_iov = tcp_iov };
size_t len;
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
ssize_t n;
if (conn->events == CLOSED)
return p->count - idx;
ASSERT(conn->events & ESTABLISHED);
for (i = idx, iov_i = 0; i < (int)p->count; i++) {
uint32_t seq, seq_offset, ack_seq;
const struct tcphdr *th;
char *data;
size_t off;
th = packet_get(p, i, 0, sizeof(*th), &len);
if (!th)
return -1;
len += sizeof(*th);
off = th->doff * 4UL;
if (off < sizeof(*th) || off > len)
return -1;
if (th->rst) {
conn_event(c, conn, CLOSED);
return 1;
}
len -= off;
data = packet_get(p, i, off, len, NULL);
if (!data)
continue;
seq = ntohl(th->seq);
ack_seq = ntohl(th->ack_seq);
if (th->ack) {
ack = 1;
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
if (SEQ_GE(ack_seq, conn->seq_ack_from_tap) &&
SEQ_GE(ack_seq, max_ack_seq)) {
/* Fast re-transmit */
retr = !len && !th->fin &&
ack_seq == max_ack_seq &&
ntohs(th->window) == max_ack_seq_wnd;
max_ack_seq_wnd = ntohs(th->window);
max_ack_seq = ack_seq;
}
}
if (th->fin)
fin = 1;
if (!len)
continue;
seq_offset = seq_from_tap - seq;
/* Use data from this buffer only in these two cases:
*
* , seq_from_tap , seq_from_tap
* |--------| <-- len |--------| <-- len
* '----' <-- offset ' <-- offset
* ^ seq ^ seq
* (offset >= 0, seq + len > seq_from_tap)
*
* discard in these two cases:
* , seq_from_tap , seq_from_tap
* |--------| <-- len |--------| <-- len
* '--------' <-- offset '-----| <- offset
* ^ seq ^ seq
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
* (offset >= 0, seq + len <= seq_from_tap)
*
* keep, look for another buffer, then go back, in this case:
* , seq_from_tap
* |--------| <-- len
* '===' <-- offset
* ^ seq
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
* (offset < 0)
*/
if (SEQ_GE(seq_offset, 0) && SEQ_LE(seq + len, seq_from_tap))
continue;
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
if (SEQ_LT(seq_offset, 0)) {
if (keep == -1)
keep = i;
continue;
}
tcp_iov[iov_i].iov_base = data + seq_offset;
tcp_iov[iov_i].iov_len = len - seq_offset;
seq_from_tap += tcp_iov[iov_i].iov_len;
iov_i++;
if (keep == i)
keep = -1;
if (keep != -1)
i = keep - 1;
}
tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer David reports that TCP transfers might stall, especially with smaller socket buffer sizes, because we reset the ACK_FROM_TAP_DUE flag, in tcp_tap_handler(), whenever we receive an ACK segment, regardless of its sequence number and the fact that we might still be waiting for one. This way, we might fail to re-transmit frames on ACK timeouts. We need, instead, to: - indicate with the @retrans field only re-transmissions for the same data sequences. If we make progress, it should be reset, given that it's used to abort a connection when we exceed a given number of re-transmissions for the same data - unset the ACK_FROM_TAP_DUE flag if and only if the acknowledged sequence is the same as the last one we sent, as suggested by David - keep it set otherwise, if progress was done but not all the data we sent was acknowledged, and update the expiration of the ACK timeout Add a new helper for these purposes, tcp_update_seqack_from_tap(). To extend the ACK timeout, the new helper sets the ACK_FROM_TAP_DUE flag, even if it was already set, and conn_flag_do() triggers a timer update. This part should be revisited at a later time, because, strictly speaking, ACK_FROM_TAP_DUE isn't a flag anymore. One possibility might be to introduce another connection attribute for events affecting timer deadlines. Reported-by: David Gibson <david@gibson.dropbear.id.au> Link: https://bugs.passt.top/show_bug.cgi?id=41 Suggested-by: David Gibson <david@gibson.dropbear.id.au> Fixes: be5bbb9b0681 ("tcp: Rework timers to use timerfd instead of periodic bitmap scan") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-02-12 22:26:55 +01:00
/* On socket flush failure, pretend there was no ACK, try again later */
if (ack && !tcp_sock_consume(conn, max_ack_seq))
tcp_update_seqack_from_tap(c, conn, max_ack_seq);
tcp: Don't use TCP_WINDOW_CLAMP On the L2 tap side, we see TCP headers and know the TCP window that the ultimate receiver is advertising. In order to avoid unnecessary buffering within passt/pasta (or by the kernel on passt/pasta's behalf) we attempt to advertise that window back to the original sock-side sender using TCP_WINDOW_CLAMP. However, TCP_WINDOW_CLAMP just doesn't work like this. Prior to kernel commit 3aa7857fe1d7 ("tcp: enable mid stream window clamp"), it simply had no effect on established sockets. After that commit, it does affect established sockets but doesn't behave the way we need: * It appears to be designed only to shrink the window, not to allow it to re-expand. * More importantly, that commit has a serious bug where if the setsockopt() is made when the existing kernel advertised window for the socket happens to be zero, it will now become locked at zero, stopping any further data from being received on the socket. Since this has never worked as intended, simply remove it. It might be possible to re-implement the intended behaviour by manipulating SO_RCVBUF, so we leave a comment to that effect. This kernel bug is the underlying cause of both the linked passt bug and the linked podman bug. We attempted to fix this before with passt commit d3192f67 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag"). However while that commit masked the bug for some cases, it didn't really address the problem. Fixes: d3192f67c492 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag") Link: https://github.com/containers/podman/issues/20170 Link: https://bugs.passt.top/show_bug.cgi?id=74 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-09 10:54:00 +01:00
tcp_tap_window_update(conn, max_ack_seq_wnd);
tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag It looks like we need it as workaround for this situation, readily reproducible at least with a 6.5 Linux kernel, with default rmem_max and wmem_max values: - an iperf3 client on the host sends about 160 KiB, typically segmented into five frames by passt. We read this data using MSG_PEEK - the iperf3 server on the guest starts receiving - meanwhile, the host kernel advertised a zero-sized window to the sender, as expected - eventually, the guest acknowledges all the data sent so far, and we drop it from the buffer, courtesy of tcp_sock_consume(), using recv() with MSG_TRUNC - the client, however, doesn't get an updated window value, and even keepalive packets are answered with zero-window segments, until the connection is closed It looks like dropping data from a socket using MSG_TRUNC doesn't cause a recalculation of the window, which would be expected as a result of any receiving operation that invalidates data on a buffer (that is, not with MSG_PEEK). Strangely enough, setting TCP_WINDOW_CLAMP via setsockopt(), even to the previous value we clamped to, forces a recalculation of the window which is advertised to the sender. I couldn't quite confirm this issue by following all the possible code paths in the kernel, yet. If confirmed, this should be fixed in the kernel, but meanwhile this workaround looks robust to me (and it will be needed for backward compatibility anyway). Reported-by: Matej Hrica <mhrica@redhat.com> Link: https://bugs.passt.top/show_bug.cgi?id=74 Analysed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-09-22 23:21:20 +02:00
if (retr) {
flow_trace(conn,
"fast re-transmit, ACK: %u, previous sequence: %u",
max_ack_seq, conn->seq_to_tap);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
conn->seq_ack_from_tap = max_ack_seq;
conn->seq_to_tap = max_ack_seq;
tcp_data_from_sock(c, conn);
}
if (!iov_i)
goto out;
mh.msg_iovlen = iov_i;
eintr:
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
n = sendmsg(conn->sock, &mh, MSG_DONTWAIT | MSG_NOSIGNAL);
if (n < 0) {
if (errno == EPIPE) {
/* Here's the wrap, said the tap.
* In my pocket, said the socket.
* Then swiftly looked away and left.
*/
conn->seq_from_tap = seq_from_tap;
tcp_send_flag(c, conn, ACK);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
}
if (errno == EINTR)
goto eintr;
if (errno == EAGAIN || errno == EWOULDBLOCK) {
tcp_send_flag(c, conn, ACK_IF_NEEDED);
return p->count - idx;
}
return -1;
}
if (n < (int)(seq_from_tap - conn->seq_from_tap)) {
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
partial_send = 1;
conn->seq_from_tap += n;
tcp_send_flag(c, conn, ACK_IF_NEEDED);
} else {
conn->seq_from_tap += n;
}
out:
if (keep != -1) {
/* We use an 8-bit approximation here: the associated risk is
* that we skip a duplicate ACK on 8-bit sequence number
* collision. Fast retransmit is a SHOULD in RFC 5681, 3.2.
*/
if (conn->seq_dup_ack_approx != (conn->seq_from_tap & 0xff)) {
conn->seq_dup_ack_approx = conn->seq_from_tap & 0xff;
tcp_send_flag(c, conn, DUP_ACK);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
}
return p->count - idx;
}
if (ack && conn->events & TAP_FIN_SENT &&
conn->seq_ack_from_tap == conn->seq_to_tap)
conn_event(c, conn, TAP_FIN_ACKED);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
if (fin && !partial_send) {
conn->seq_from_tap++;
conn_event(c, conn, TAP_FIN_RCVD);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
} else {
tcp_send_flag(c, conn, ACK_IF_NEEDED);
}
return p->count - idx;
}
/**
* tcp_conn_from_sock_finish() - Complete connection setup after connect()
* @c: Execution context
* @conn: Connection pointer
* @th: TCP header of SYN, ACK segment: caller MUST ensure it's there
* @opts: Pointer to start of options
* @optlen: Bytes in options: caller MUST ensure available length
*/
static void tcp_conn_from_sock_finish(struct ctx *c, struct tcp_tap_conn *conn,
const struct tcphdr *th,
const char *opts, size_t optlen)
{
tcp: Don't use TCP_WINDOW_CLAMP On the L2 tap side, we see TCP headers and know the TCP window that the ultimate receiver is advertising. In order to avoid unnecessary buffering within passt/pasta (or by the kernel on passt/pasta's behalf) we attempt to advertise that window back to the original sock-side sender using TCP_WINDOW_CLAMP. However, TCP_WINDOW_CLAMP just doesn't work like this. Prior to kernel commit 3aa7857fe1d7 ("tcp: enable mid stream window clamp"), it simply had no effect on established sockets. After that commit, it does affect established sockets but doesn't behave the way we need: * It appears to be designed only to shrink the window, not to allow it to re-expand. * More importantly, that commit has a serious bug where if the setsockopt() is made when the existing kernel advertised window for the socket happens to be zero, it will now become locked at zero, stopping any further data from being received on the socket. Since this has never worked as intended, simply remove it. It might be possible to re-implement the intended behaviour by manipulating SO_RCVBUF, so we leave a comment to that effect. This kernel bug is the underlying cause of both the linked passt bug and the linked podman bug. We attempted to fix this before with passt commit d3192f67 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag"). However while that commit masked the bug for some cases, it didn't really address the problem. Fixes: d3192f67c492 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag") Link: https://github.com/containers/podman/issues/20170 Link: https://bugs.passt.top/show_bug.cgi?id=74 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-09 10:54:00 +01:00
tcp_tap_window_update(conn, ntohs(th->window));
tcp_get_tap_ws(conn, opts, optlen);
/* First value is not scaled */
if (!(conn->wnd_from_tap >>= conn->ws_from_tap))
conn->wnd_from_tap = 1;
tcp: Clamp MSS value when queueing data to tap, also for pasta Tom reports that a pattern of repated ~1 MiB chunks downloads over NNTP over TLS, on Podman 4.4 using pasta as network back-end, results in pasta taking one full CPU thread after a while, and the download never succeeds. On that setup, we end up re-sending the same frame over and over, with a consistent 65 534 bytes size, and never get an acknowledgement from the tap-side client. This only happens for the default MTU value (65 520 bytes) or for values that are slightly smaller than that (down to 64 499 bytes). We hit this condition because the MSS value we use in tcp_data_from_sock(), only in pasta mode, is simply clamped to USHRT_MAX, and not to the actual size of the buffers we pre-cooked for sending, which is a bit less than that. It looks like we got away with it until commit 0fb7b2b9080a ("tap: Use different io vector bases depending on tap type") fixed the setting of iov_len. Luckily, since it's pasta, we're queueing up to two frames at a time, so the worst that can happen is a badly segmented TCP stream: we always have some space at the tail of the buffer. Clamp the MSS value to the appropriate maximum given by struct tcp{4,6}_buf_data_t, no matter if we're running in pasta or passt mode. While at it, fix the comments to those structs to reflect the current struct size. This is not really relevant for any further calculation or consideration, but it's convenient to know while debugging this kind of issues. Thanks to Tom for reporting the issue in a very detailed way and for providing a test setup. Reported-by: Tom Mombourquette <tom@devnode.com> Link: https://github.com/containers/podman/issues/17703 Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-03-08 18:07:42 +01:00
MSS_SET(conn, tcp_conn_tap_mss(conn, opts, optlen));
conn->seq_init_from_tap = ntohl(th->seq) + 1;
conn->seq_from_tap = conn->seq_init_from_tap;
conn->seq_ack_to_tap = conn->seq_from_tap;
conn_event(c, conn, ESTABLISHED);
/* The client might have sent data already, which we didn't
* dequeue waiting for SYN,ACK from tap -- check now.
*/
tcp_data_from_sock(c, conn);
tcp: Always send an ACK segment once the handshake is completed The reporter is running a SMTP server behind pasta, and the client waits for the server's banner before sending any data. In turn, the server waits for our ACK after sending SYN,ACK, which never comes. If we use the ACK_IF_NEEDED indication to tcp_send_flag(), given that there's no pending data, we delay sending the ACK segment at the end of the three-way handshake until we have some data to send to the server. This was actually intended, as I thought we would lower the latency for new connections, but we can't assume that the client will start sending data first (SMTP is the typical example where this doesn't happen). And, trying out this patch with SSH (where the client starts sending data first), the reporter actually noticed we have a lower latency by forcing an ACK right away. Comparing a capture before the patch: 13:07:14.007704 IP 10.1.2.1.42056 > 10.1.2.140.1234: Flags [S], seq 1797034836, win 65535, options [mss 4096,nop,wscale 7], length 0 13:07:14.007769 IP 10.1.2.140.1234 > 10.1.2.1.42056: Flags [S.], seq 2297052481, ack 1797034837, win 65480, options [mss 65480,nop,wscale 7], length 0 13:07:14.008462 IP 10.1.2.1.42056 > 10.1.2.140.1234: Flags [.], seq 1:22, ack 1, win 65535, length 21 13:07:14.008496 IP 10.1.2.140.1234 > 10.1.2.1.42056: Flags [.], ack 22, win 512, length 0 13:07:14.011799 IP 10.1.2.140.1234 > 10.1.2.1.42056: Flags [P.], seq 1:515, ack 22, win 512, length 514 and after: 13:10:26.165364 IP 10.1.2.1.59508 > 10.1.2.140.1234: Flags [S], seq 4165939595, win 65535, options [mss 4096,nop,wscale 7], length 0 13:10:26.165391 IP 10.1.2.140.1234 > 10.1.2.1.59508: Flags [S.], seq 985607380, ack 4165939596, win 65480, options [mss 65480,nop,wscale 7], length 0 13:10:26.165418 IP 10.1.2.1.59508 > 10.1.2.140.1234: Flags [.], ack 1, win 512, length 0 13:10:26.165683 IP 10.1.2.1.59508 > 10.1.2.140.1234: Flags [.], seq 1:22, ack 1, win 512, length 21 13:10:26.165698 IP 10.1.2.140.1234 > 10.1.2.1.59508: Flags [.], ack 22, win 512, length 0 13:10:26.167107 IP 10.1.2.140.1234 > 10.1.2.1.59508: Flags [P.], seq 1:515, ack 22, win 512, length 514 the latency between the initial SYN segment and the first data transmission actually decreases from 792µs to 334µs. This is not statistically relevant as we have a single measurement, but it can't be that bad, either. Reported-by: cr3bs (from IRC) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-09-22 23:48:06 +02:00
tcp_send_flag(c, conn, ACK);
}
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
/**
* tcp_tap_handler() - Handle packets from tap and state transitions
* @c: Execution context
* @pif: pif on which the packet is arriving
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* @af: Address family, AF_INET or AF_INET6
* @saddr: Source address
* @daddr: Destination address
* @p: Pool of TCP packets, with TCP headers
* @idx: Index of first packet in pool to process
udp: Connection tracking for ephemeral, local ports, and related fixes As we support UDP forwarding for packets that are sent to local ports, we actually need some kind of connection tracking for UDP. While at it, this commit introduces a number of vaguely related fixes for issues observed while trying this out. In detail: - implement an explicit, albeit minimalistic, connection tracking for UDP, to allow usage of ephemeral ports by the guest and by the host at the same time, by binding them dynamically as needed, and to allow mapping address changes for packets with a loopback address as destination - set the guest MAC address whenever we receive a packet from tap instead of waiting for an ARP request, and set it to broadcast on start, otherwise DHCPv6 might not work if all DHCPv6 requests time out before the guest starts talking IPv4 - split context IPv6 address into address we assign, global or site address seen on tap, and link-local address seen on tap, and make sure we use the addresses we've seen as destination (link-local choice depends on source address). Similarly, for IPv4, split into address we assign and address we observe, and use the address we observe as destination - introduce a clock_gettime() syscall right after epoll_wait() wakes up, so that we can remove all the other ones and pass the current timestamp to tap and socket handlers -- this is additionally needed by UDP to time out bindings to ephemeral ports and mappings between loopback address and a local address - rename sock_l4_add() to sock_l4(), no semantic changes intended - include <arpa/inet.h> in passt.c before kernel headers so that we can use <netinet/in.h> macros to check IPv6 address types, and remove a duplicate <linux/ip.h> inclusion Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-04-29 16:59:20 +02:00
* @now: Current timestamp
*
* Return: count of consumed packets
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*/
int tcp_tap_handler(struct ctx *c, uint8_t pif, int af,
const void *saddr, const void *daddr,
const struct pool *p, int idx, const struct timespec *now)
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
{
struct tcp_tap_conn *conn;
const struct tcphdr *th;
size_t optlen, len;
const char *opts;
int ack_due = 0;
int count;
(void)pif;
th = packet_get(p, idx, 0, sizeof(*th), &len);
if (!th)
return 1;
len += sizeof(*th);
optlen = th->doff * 4UL - sizeof(*th);
/* Static checkers might fail to see this: */
optlen = MIN(optlen, ((1UL << 4) /* from doff width */ - 6) * 4UL);
opts = packet_get(p, idx, sizeof(*th), optlen, NULL);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
conn = tcp_hash_lookup(c, af, daddr, ntohs(th->source), ntohs(th->dest));
/* New connection from tap */
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
if (!conn) {
if (opts && th->syn && !th->ack)
tcp_conn_from_tap(c, af, saddr, daddr, th,
opts, optlen, now);
return 1;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}
flow_trace(conn, "packet length %zu from tap", len);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
if (th->rst) {
conn_event(c, conn, CLOSED);
return 1;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}
tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer David reports that TCP transfers might stall, especially with smaller socket buffer sizes, because we reset the ACK_FROM_TAP_DUE flag, in tcp_tap_handler(), whenever we receive an ACK segment, regardless of its sequence number and the fact that we might still be waiting for one. This way, we might fail to re-transmit frames on ACK timeouts. We need, instead, to: - indicate with the @retrans field only re-transmissions for the same data sequences. If we make progress, it should be reset, given that it's used to abort a connection when we exceed a given number of re-transmissions for the same data - unset the ACK_FROM_TAP_DUE flag if and only if the acknowledged sequence is the same as the last one we sent, as suggested by David - keep it set otherwise, if progress was done but not all the data we sent was acknowledged, and update the expiration of the ACK timeout Add a new helper for these purposes, tcp_update_seqack_from_tap(). To extend the ACK timeout, the new helper sets the ACK_FROM_TAP_DUE flag, even if it was already set, and conn_flag_do() triggers a timer update. This part should be revisited at a later time, because, strictly speaking, ACK_FROM_TAP_DUE isn't a flag anymore. One possibility might be to introduce another connection attribute for events affecting timer deadlines. Reported-by: David Gibson <david@gibson.dropbear.id.au> Link: https://bugs.passt.top/show_bug.cgi?id=41 Suggested-by: David Gibson <david@gibson.dropbear.id.au> Fixes: be5bbb9b0681 ("tcp: Rework timers to use timerfd instead of periodic bitmap scan") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-02-12 22:26:55 +01:00
if (th->ack && !(conn->events & ESTABLISHED))
tcp_update_seqack_from_tap(c, conn, ntohl(th->ack_seq));
/* Establishing connection from socket */
if (conn->events & SOCK_ACCEPTED) {
if (th->syn && th->ack && !th->fin) {
tcp_conn_from_sock_finish(c, conn, th, opts, optlen);
return 1;
}
goto reset;
}
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
/* Establishing connection from tap */
if (conn->events & TAP_SYN_RCVD) {
if (!(conn->events & TAP_SYN_ACK_SENT))
goto reset;
conn_event(c, conn, ESTABLISHED);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
if (th->fin) {
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
conn->seq_from_tap++;
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
shutdown(conn->sock, SHUT_WR);
tcp_send_flag(c, conn, ACK);
conn_event(c, conn, SOCK_FIN_SENT);
return 1;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}
if (!th->ack)
goto reset;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
tcp: Don't use TCP_WINDOW_CLAMP On the L2 tap side, we see TCP headers and know the TCP window that the ultimate receiver is advertising. In order to avoid unnecessary buffering within passt/pasta (or by the kernel on passt/pasta's behalf) we attempt to advertise that window back to the original sock-side sender using TCP_WINDOW_CLAMP. However, TCP_WINDOW_CLAMP just doesn't work like this. Prior to kernel commit 3aa7857fe1d7 ("tcp: enable mid stream window clamp"), it simply had no effect on established sockets. After that commit, it does affect established sockets but doesn't behave the way we need: * It appears to be designed only to shrink the window, not to allow it to re-expand. * More importantly, that commit has a serious bug where if the setsockopt() is made when the existing kernel advertised window for the socket happens to be zero, it will now become locked at zero, stopping any further data from being received on the socket. Since this has never worked as intended, simply remove it. It might be possible to re-implement the intended behaviour by manipulating SO_RCVBUF, so we leave a comment to that effect. This kernel bug is the underlying cause of both the linked passt bug and the linked podman bug. We attempted to fix this before with passt commit d3192f67 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag"). However while that commit masked the bug for some cases, it didn't really address the problem. Fixes: d3192f67c492 ("tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag") Link: https://github.com/containers/podman/issues/20170 Link: https://bugs.passt.top/show_bug.cgi?id=74 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-09 10:54:00 +01:00
tcp_tap_window_update(conn, ntohs(th->window));
tcp_data_from_sock(c, conn);
if (p->count - idx == 1)
return 1;
}
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
/* Established connections not accepting data from tap */
if (conn->events & TAP_FIN_RCVD) {
tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer David reports that TCP transfers might stall, especially with smaller socket buffer sizes, because we reset the ACK_FROM_TAP_DUE flag, in tcp_tap_handler(), whenever we receive an ACK segment, regardless of its sequence number and the fact that we might still be waiting for one. This way, we might fail to re-transmit frames on ACK timeouts. We need, instead, to: - indicate with the @retrans field only re-transmissions for the same data sequences. If we make progress, it should be reset, given that it's used to abort a connection when we exceed a given number of re-transmissions for the same data - unset the ACK_FROM_TAP_DUE flag if and only if the acknowledged sequence is the same as the last one we sent, as suggested by David - keep it set otherwise, if progress was done but not all the data we sent was acknowledged, and update the expiration of the ACK timeout Add a new helper for these purposes, tcp_update_seqack_from_tap(). To extend the ACK timeout, the new helper sets the ACK_FROM_TAP_DUE flag, even if it was already set, and conn_flag_do() triggers a timer update. This part should be revisited at a later time, because, strictly speaking, ACK_FROM_TAP_DUE isn't a flag anymore. One possibility might be to introduce another connection attribute for events affecting timer deadlines. Reported-by: David Gibson <david@gibson.dropbear.id.au> Link: https://bugs.passt.top/show_bug.cgi?id=41 Suggested-by: David Gibson <david@gibson.dropbear.id.au> Fixes: be5bbb9b0681 ("tcp: Rework timers to use timerfd instead of periodic bitmap scan") Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-02-12 22:26:55 +01:00
tcp_update_seqack_from_tap(c, conn, ntohl(th->ack_seq));
if (conn->events & SOCK_FIN_RCVD &&
conn->seq_ack_from_tap == conn->seq_to_tap)
conn_event(c, conn, CLOSED);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
return 1;
}
/* Established connections accepting data from tap */
count = tcp_data_from_tap(c, conn, p, idx);
if (count == -1)
goto reset;
tcp: Force TCP_WINDOW_CLAMP before resetting STALLED flag It looks like we need it as workaround for this situation, readily reproducible at least with a 6.5 Linux kernel, with default rmem_max and wmem_max values: - an iperf3 client on the host sends about 160 KiB, typically segmented into five frames by passt. We read this data using MSG_PEEK - the iperf3 server on the guest starts receiving - meanwhile, the host kernel advertised a zero-sized window to the sender, as expected - eventually, the guest acknowledges all the data sent so far, and we drop it from the buffer, courtesy of tcp_sock_consume(), using recv() with MSG_TRUNC - the client, however, doesn't get an updated window value, and even keepalive packets are answered with zero-window segments, until the connection is closed It looks like dropping data from a socket using MSG_TRUNC doesn't cause a recalculation of the window, which would be expected as a result of any receiving operation that invalidates data on a buffer (that is, not with MSG_PEEK). Strangely enough, setting TCP_WINDOW_CLAMP via setsockopt(), even to the previous value we clamped to, forces a recalculation of the window which is advertised to the sender. I couldn't quite confirm this issue by following all the possible code paths in the kernel, yet. If confirmed, this should be fixed in the kernel, but meanwhile this workaround looks robust to me (and it will be needed for backward compatibility anyway). Reported-by: Matej Hrica <mhrica@redhat.com> Link: https://bugs.passt.top/show_bug.cgi?id=74 Analysed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-09-22 23:21:20 +02:00
conn_flag(c, conn, ~STALLED);
if (conn->seq_ack_to_tap != conn->seq_from_tap)
ack_due = 1;
if ((conn->events & TAP_FIN_RCVD) && !(conn->events & SOCK_FIN_SENT)) {
shutdown(conn->sock, SHUT_WR);
conn_event(c, conn, SOCK_FIN_SENT);
tcp_send_flag(c, conn, ACK);
ack_due = 0;
}
if (ack_due)
conn_flag(c, conn, ACK_TO_TAP_DUE);
return count;
reset:
/* Something's gone wrong, so reset the connection. We discard
* remaining packets in the batch, since they'd be invalidated when our
* RST is received, even if otherwise good.
*/
tcp_rst(c, conn);
return p->count - idx;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}
/**
* tcp_connect_finish() - Handle completion of connect() from EPOLLOUT event
* @c: Execution context
* @conn: Connection pointer
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*/
static void tcp_connect_finish(struct ctx *c, struct tcp_tap_conn *conn)
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
{
socklen_t sl;
int so;
sl = sizeof(so);
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
if (getsockopt(conn->sock, SOL_SOCKET, SO_ERROR, &so, &sl) || so) {
tcp_rst(c, conn);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
return;
}
if (tcp_send_flag(c, conn, SYN | ACK))
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
return;
conn_event(c, conn, TAP_SYN_ACK_SENT);
conn_flag(c, conn, ACK_FROM_TAP_DUE);
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
}
/**
* tcp_snat_inbound() - Translate source address for inbound data if needed
* @c: Execution context
* @addr: Source address of inbound packet/connection
*/
static void tcp_snat_inbound(const struct ctx *c, union inany_addr *addr)
{
struct in_addr *addr4 = inany_v4(addr);
if (addr4) {
if (IN4_IS_ADDR_LOOPBACK(addr4) ||
IN4_IS_ADDR_UNSPECIFIED(addr4) ||
IN4_ARE_ADDR_EQUAL(addr4, &c->ip4.addr_seen))
*addr4 = c->ip4.gw;
} else {
struct in6_addr *addr6 = &addr->a6;
if (IN6_IS_ADDR_LOOPBACK(addr6) ||
IN6_ARE_ADDR_EQUAL(addr6, &c->ip6.addr_seen) ||
IN6_ARE_ADDR_EQUAL(addr6, &c->ip6.addr)) {
if (IN6_IS_ADDR_LINKLOCAL(&c->ip6.gw))
*addr6 = c->ip6.gw;
else
*addr6 = c->ip6.addr_ll;
}
}
}
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
/**
* tcp_tap_conn_from_sock() - Initialize state for non-spliced connection
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* @c: Execution context
* @ref: epoll reference of listening socket
* @conn: connection structure to initialize
* @s: Accepted socket
* @sa: Peer socket address (from accept())
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* @now: Current timestamp
*/
static void tcp_tap_conn_from_sock(struct ctx *c,
union tcp_listen_epoll_ref ref,
struct tcp_tap_conn *conn, int s,
const struct sockaddr *sa,
const struct timespec *now)
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
{
conn->f.type = FLOW_TCP;
conn->sock = s;
conn->timer = -1;
conn->ws_to_tap = conn->ws_from_tap = 0;
conn_event(c, conn, SOCK_ACCEPTED);
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
inany_from_sockaddr(&conn->faddr, &conn->fport, sa);
conn->eport = ref.port;
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
tcp_snat_inbound(c, &conn->faddr);
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
tcp_seq_init(c, conn, now);
tcp_hash_insert(c, conn);
tcp: Don't special case the handling of the ack of a syn TCP treats the SYN packets as though they occupied 1 byte in the logical data stream described by the sequence numbers. That is, the very first ACK (or SYN-ACK) each side sends should acknowledge a sequence number one greater than the initial sequence number given in the SYN or SYN-ACK it's responding to. In passt we were tracking that by advancing conn->seq_to_tap by one when we send a SYN or SYN-ACK (in tcp_send_flag()). However, we also initialized conn->seq_ack_from_tap, representing the acks we've already seen from the tap side, to ISN+1, meaning we treated it has having acknowledged the SYN before it actually did. There were apparently reasons for this in earlier versions, but it causes problems now. Because of this when we actually did receive the initial ACK or SYN-ACK, we wouldn't see the acknoweldged serial number as advancing, and so wouldn't clear the ACK_FROM_TAP_DUE flag. In most cases we'd get away because subsequent packets would clear the flag. However if one (or both) sides didn't send any data, the other side would (correctly) keep sending ISN+1 as the acknowledged sequence number, meaning we would never clear the ACK_FROM_TAP_DUE flag. That would mean we'd treat the connection as if we needed to retransmit (although we had 0 bytes to retransmit), and eventaully (after around 30s) reset the connection due to too many retransmits. Specifically this could cause the iperf3 throughput tests in the testsuite to fail if set for a long enough test period. Correct this by initializing conn->seq_ack_from_tap to the ISN and only advancing it when we actually get the first ACK (or SYN-ACK). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-03-27 05:56:34 +02:00
conn->seq_ack_from_tap = conn->seq_to_tap;
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
conn->wnd_from_tap = WINDOW_DEFAULT;
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
tcp_send_flag(c, conn, SYN);
conn_flag(c, conn, ACK_FROM_TAP_DUE);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
tcp_get_sndbuf(conn);
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
}
/**
* tcp_listen_handler() - Handle new connection request from listening socket
* @c: Execution context
* @ref: epoll reference of listening socket
* @now: Current timestamp
*/
void tcp_listen_handler(struct ctx *c, union epoll_ref ref,
const struct timespec *now)
{
struct sockaddr_storage sa;
socklen_t sl = sizeof(sa);
union flow *flow;
int s;
if (c->no_tcp || c->flow_count >= FLOW_MAX)
return;
s = accept4(ref.fd, (struct sockaddr *)&sa, &sl, SOCK_NONBLOCK);
if (s < 0)
return;
flow = flowtab + c->flow_count++;
if (c->mode == MODE_PASTA &&
tcp_splice_conn_from_sock(c, ref.tcp_listen, &flow->tcp_splice,
s, (struct sockaddr *)&sa))
return;
tcp_tap_conn_from_sock(c, ref.tcp_listen, &flow->tcp, s,
(struct sockaddr *)&sa, now);
}
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
/**
* tcp_timer_handler() - timerfd events: close, send ACK, retransmit, or reset
* @c: Execution context
* @ref: epoll reference of timer (not connection)
*
* #syscalls timerfd_gettime
*/
void tcp_timer_handler(struct ctx *c, union epoll_ref ref)
{
struct itimerspec check_armed = { { 0 }, { 0 } };
struct tcp_tap_conn *conn = CONN(ref.flow);
if (c->no_tcp)
return;
/* We don't reset timers on ~ACK_FROM_TAP_DUE, ~ACK_TO_TAP_DUE. If the
* timer is currently armed, this event came from a previous setting,
* and we just set the timer to a new point in the future: discard it.
*/
timerfd_gettime(conn->timer, &check_armed);
if (check_armed.it_value.tv_sec || check_armed.it_value.tv_nsec)
return;
if (conn->flags & ACK_TO_TAP_DUE) {
tcp_send_flag(c, conn, ACK_IF_NEEDED);
tcp: Don't reset ACK_TO_TAP_DUE on any ACK, reschedule timer as needed This is mostly symmetric with commit cc6d8286d104 ("tcp: Reset ACK_FROM_TAP_DUE flag only as needed, update timer"): we shouldn't reset the ACK_TO_TAP_DUE flag on any inbound ACK segment, but only once we acknowledge everything we received from the guest or the container. If we don't, a client might unnecessarily hold off further data, especially during slow start, and in general we won't converge to the usable bandwidth. This is very visible especially with traffic tests on links with non-negligible latency, such as in the reported issue. There, a public iperf3 server sometimes aborts the test due do what appears to be a low iperf3's --rcv-timeout (probably less than a second). Even if this doesn't happen, the throughput will converge to a fraction of the usable bandwidth. Clear ACK_TO_TAP_DUE if we acknowledged everything, set it if we didn't, and reschedule the timer in case the flag is still set as the timer expires. While at it, decrease the ACK timer interval to 10ms. A 50ms interval is short enough for any bandwidth-delay product I had in mind (local connections, or non-local connections with limited bandwidth), but here I am, testing 1gbps transfers to a peer with 100ms RTT. Indeed, we could eventually make the timer interval dependent on the current window and estimated bandwidth-delay product, but at least for the moment being, 10ms should be long enough to avoid any measurable syscall overhead, yet usable for any real-world application. Reported-by: Lukas Mrtvy <lukas.mrtvy@gmail.com> Link: https://bugs.passt.top/show_bug.cgi?id=44 Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-03-21 23:14:58 +01:00
tcp_timer_ctl(c, conn);
} else if (conn->flags & ACK_FROM_TAP_DUE) {
if (!(conn->events & ESTABLISHED)) {
flow_dbg(conn, "handshake timeout");
tcp_rst(c, conn);
} else if (CONN_HAS(conn, SOCK_FIN_SENT | TAP_FIN_ACKED)) {
flow_dbg(conn, "FIN timeout");
tcp_rst(c, conn);
} else if (conn->retrans == TCP_MAX_RETRANS) {
flow_dbg(conn, "retransmissions count exceeded");
tcp_rst(c, conn);
} else {
flow_dbg(conn, "ACK timeout, retry");
conn->retrans++;
conn->seq_to_tap = conn->seq_ack_from_tap;
tcp_data_from_sock(c, conn);
tcp_timer_ctl(c, conn);
}
} else {
struct itimerspec new = { { 0 }, { ACT_TIMEOUT, 0 } };
struct itimerspec old = { { 0 }, { 0 } };
/* Activity timeout: if it was already set, reset the
* connection, otherwise, it was a left-over from ACK_TO_TAP_DUE
* or ACK_FROM_TAP_DUE, so just set the long timeout in that
* case. This avoids having to preemptively reset the timer on
* ~ACK_TO_TAP_DUE or ~ACK_FROM_TAP_DUE.
*/
timerfd_settime(conn->timer, 0, &new, &old);
if (old.it_value.tv_sec == ACT_TIMEOUT) {
flow_dbg(conn, "activity timeout");
tcp_rst(c, conn);
}
}
}
/**
* tcp_tap_sock_handler() - Handle new data from non-spliced socket
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* @c: Execution context
* @conn: Connection state
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* @events: epoll events bitmap
*/
static void tcp_tap_sock_handler(struct ctx *c, struct tcp_tap_conn *conn,
uint32_t events)
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
{
if (conn->events == CLOSED)
return;
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
if (events & EPOLLERR) {
tcp_rst(c, conn);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
return;
}
if ((conn->events & TAP_FIN_SENT) && (events & EPOLLHUP)) {
conn_event(c, conn, CLOSED);
return;
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}
if (conn->events & ESTABLISHED) {
if (CONN_HAS(conn, SOCK_FIN_SENT | TAP_FIN_ACKED))
conn_event(c, conn, CLOSED);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
if (events & (EPOLLRDHUP | EPOLLHUP))
conn_event(c, conn, SOCK_FIN_RCVD);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
if (events & EPOLLIN)
tcp_data_from_sock(c, conn);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
if (events & EPOLLOUT)
tcp_update_seqack_wnd(c, conn, 0, NULL);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
return;
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
}
/* EPOLLHUP during handshake: reset */
if (events & EPOLLHUP) {
tcp_rst(c, conn);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
return;
}
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
/* Data during handshake tap-side: check later */
if (conn->events & SOCK_ACCEPTED)
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
return;
if (conn->events == TAP_SYN_RCVD) {
if (events & EPOLLOUT)
tcp_connect_finish(c, conn);
/* Data? Check later */
}
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
}
/**
* tcp_sock_handler() - Handle new data from socket, or timerfd event
* @c: Execution context
* @ref: epoll reference
* @events: epoll events bitmap
*/
void tcp_sock_handler(struct ctx *c, union epoll_ref ref, uint32_t events)
{
union flow *flow = FLOW(ref.flowside.flow);
switch (flow->f.type) {
case FLOW_TCP:
tcp_tap_sock_handler(c, &flow->tcp, events);
break;
case FLOW_TCP_SPLICE:
tcp_splice_sock_handler(c, &flow->tcp_splice, ref.flowside.side,
events);
break;
default:
die("Unexpected %s in tcp_sock_handler_compact()",
FLOW_TYPE(&flow->f));
}
}
/**
* tcp_sock_init_af() - Initialise listening socket for a given af and port
* @c: Execution context
* @af: Address family to listen on
* @port: Port, host order
* @addr: Pointer to address for binding, NULL if not configured
* @ifname: Name of interface to bind to, NULL if not configured
*
* Return: fd for the new listening socket, negative error code on failure
*/
static int tcp_sock_init_af(const struct ctx *c, int af, in_port_t port,
const void *addr, const char *ifname)
{
union tcp_listen_epoll_ref tref = {
.port = port + c->tcp.fwd_in.delta[port],
.pif = PIF_HOST,
};
int s;
s = sock_l4(c, af, IPPROTO_TCP, addr, ifname, port, tref.u32);
if (c->tcp.fwd_in.mode == FWD_AUTO) {
if (af == AF_INET || af == AF_UNSPEC)
tcp_sock_init_ext[port][V4] = s < 0 ? -1 : s;
if (af == AF_INET6 || af == AF_UNSPEC)
tcp_sock_init_ext[port][V6] = s < 0 ? -1 : s;
}
if (s < 0)
return s;
tcp_sock_set_bufsize(c, s);
return s;
}
/**
* tcp_sock_init() - Create listening sockets for a given host ("inbound") port
* @c: Execution context
* @af: Address family to select a specific IP version, or AF_UNSPEC
* @addr: Pointer to address for binding, NULL if not configured
* @ifname: Name of interface to bind to, NULL if not configured
* @port: Port, host order
*
* Return: 0 on (partial) success, negative error code on (complete) failure
*/
int tcp_sock_init(const struct ctx *c, sa_family_t af, const void *addr,
const char *ifname, in_port_t port)
{
int r4 = FD_REF_MAX + 1, r6 = FD_REF_MAX + 1;
if (af == AF_UNSPEC && c->ifi4 && c->ifi6)
/* Attempt to get a dual stack socket */
if (tcp_sock_init_af(c, AF_UNSPEC, port, addr, ifname) >= 0)
return 0;
/* Otherwise create a socket per IP version */
if ((af == AF_INET || af == AF_UNSPEC) && c->ifi4)
r4 = tcp_sock_init_af(c, AF_INET, port, addr, ifname);
if ((af == AF_INET6 || af == AF_UNSPEC) && c->ifi6)
r6 = tcp_sock_init_af(c, AF_INET6, port, addr, ifname);
if (IN_INTERVAL(0, FD_REF_MAX, r4) || IN_INTERVAL(0, FD_REF_MAX, r6))
return 0;
return r4 < 0 ? r4 : r6;
}
/**
* tcp_ns_sock_init4() - Init socket to listen for outbound IPv4 connections
* @c: Execution context
* @port: Port, host order
*/
static void tcp_ns_sock_init4(const struct ctx *c, in_port_t port)
{
union tcp_listen_epoll_ref tref = {
.port = port + c->tcp.fwd_out.delta[port],
.pif = PIF_SPLICE,
};
struct in_addr loopback = IN4ADDR_LOOPBACK_INIT;
int s;
ASSERT(c->mode == MODE_PASTA);
s = sock_l4(c, AF_INET, IPPROTO_TCP, &loopback, NULL, port, tref.u32);
if (s >= 0)
tcp_sock_set_bufsize(c, s);
else
s = -1;
if (c->tcp.fwd_out.mode == FWD_AUTO)
tcp_sock_ns[port][V4] = s;
}
/**
* tcp_ns_sock_init6() - Init socket to listen for outbound IPv6 connections
* @c: Execution context
* @port: Port, host order
*/
static void tcp_ns_sock_init6(const struct ctx *c, in_port_t port)
{
union tcp_listen_epoll_ref tref = {
.port = port + c->tcp.fwd_out.delta[port],
.pif = PIF_SPLICE,
};
int s;
ASSERT(c->mode == MODE_PASTA);
s = sock_l4(c, AF_INET6, IPPROTO_TCP, &in6addr_loopback, NULL, port,
tref.u32);
if (s >= 0)
tcp_sock_set_bufsize(c, s);
else
s = -1;
if (c->tcp.fwd_out.mode == FWD_AUTO)
tcp_sock_ns[port][V6] = s;
}
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
/**
* tcp_ns_sock_init() - Init socket to listen for spliced outbound connections
* @c: Execution context
* @port: Port, host order
*/
void tcp_ns_sock_init(const struct ctx *c, in_port_t port)
{
if (c->ifi4)
tcp_ns_sock_init4(c, port);
if (c->ifi6)
tcp_ns_sock_init6(c, port);
}
/**
* tcp_ns_socks_init() - Bind sockets in namespace for outbound connections
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
* @arg: Execution context
*
passt, pasta: Namespace-based sandboxing, defer seccomp policy application To reach (at least) a conceptually equivalent security level as implemented by --enable-sandbox in slirp4netns, we need to create a new mount namespace and pivot_root() into a new (empty) mountpoint, so that passt and pasta can't access any filesystem resource after initialisation. While at it, also detach IPC, PID (only for passt, to prevent vulnerabilities based on the knowledge of a target PID), and UTS namespaces. With this approach, if we apply the seccomp filters right after the configuration step, the number of allowed syscalls grows further. To prevent this, defer the application of seccomp policies after the initialisation phase, before the main loop, that's where we expect bad things to happen, potentially. This way, we get back to 22 allowed syscalls for passt and 34 for pasta, on x86_64. While at it, move #syscalls notes to specific code paths wherever it conceptually makes sense. We have to open all the file handles we'll ever need before sandboxing: - the packet capture file can only be opened once, drop instance numbers from the default path and use the (pre-sandbox) PID instead - /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection of bound ports in pasta mode, are now opened only once, before sandboxing, and their handles are stored in the execution context - the UNIX domain socket for passt is also bound only once, before sandboxing: to reject clients after the first one, instead of closing the listening socket, keep it open, accept and immediately discard new connection if we already have a valid one Clarify the (unchanged) behaviour for --netns-only in the man page. To actually make passt and pasta processes run in a separate PID namespace, we need to unshare(CLONE_NEWPID) before forking to background (if configured to do so). Introduce a small daemon() implementation, __daemon(), that additionally saves the PID file before forking. While running in foreground, the process itself can't move to a new PID namespace (a process can't change the notion of its own PID): mention that in the man page. For some reason, fork() in a detached PID namespace causes SIGTERM and SIGQUIT to be ignored, even if the handler is still reported as SIG_DFL: add a signal handler that just exits. We can now drop most of the pasta_child_handler() implementation, that took care of terminating all processes running in the same namespace, if pasta started a shell: the shell itself is now the init process in that namespace, and all children will terminate once the init process exits. Issuing 'echo $$' in a detached PID namespace won't return the actual namespace PID as seen from the init namespace: adapt demo and test setup scripts to reflect that. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2022-02-07 21:11:37 +01:00
* Return: 0
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
*/
static int tcp_ns_socks_init(void *arg)
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
{
const struct ctx *c = (const struct ctx *)arg;
unsigned port;
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
ns_enter(c);
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
for (port = 0; port < NUM_PORTS; port++) {
if (!bitmap_isset(c->tcp.fwd_out.map, port))
continue;
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
tcp_ns_sock_init(c, port);
passt: Add PASTA mode, major rework PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host connectivity to an otherwise disconnected, unprivileged network and user namespace, similarly to slirp4netns. Given that the implementation is largely overlapping with PASST, no separate binary is built: 'pasta' (and 'passt4netns' for clarity) both link to 'passt', and the mode of operation is selected depending on how the binary is invoked. Usage example: $ unshare -rUn # echo $$ 1871759 $ ./pasta 1871759 # From another terminal # udhcpc -i pasta0 2>/dev/null # ping -c1 pasta.pizza PING pasta.pizza (64.190.62.111) 56(84) bytes of data. 64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms --- pasta.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms # ping -c1 spaghetti.pizza PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes 64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms --- spaghetti.pizza ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms This entails a major rework, especially with regard to the storage of tracked connections and to the semantics of epoll(7) references. Indexing TCP and UDP bindings merely by socket proved to be inflexible and unsuitable to handle different connection flows: pasta also provides Layer-2 to Layer-2 socket mapping between init and a separate namespace for local connections, using a pair of splice() system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local bindings. For instance, building on the previous example: # ip link set dev lo up # iperf3 -s $ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4 [SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender [SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver iperf Done. epoll(7) references now include a generic part in order to demultiplex data to the relevant protocol handler, using 24 bits for the socket number, and an opaque portion reserved for usage by the single protocol handlers, in order to track sockets back to corresponding connections and bindings. A number of fixes pertaining to TCP state machine and congestion window handling are also included here. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-07-17 08:34:53 +02:00
}
return 0;
}
/**
* tcp_sock_refill_pool() - Refill one pool of pre-opened sockets
* @c: Execution context
* @pool: Pool of sockets to refill
* @af: Address family to use
*/
void tcp_sock_refill_pool(const struct ctx *c, int pool[], int af)
{
int i;
for (i = 0; i < TCP_SOCK_POOL_SIZE; i++) {
if (pool[i] >= 0)
break;
pool[i] = tcp_conn_new_sock(c, af);
}
}
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
/**
* tcp_sock_refill_init() - Refill pools of pre-opened sockets in init ns
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
* @c: Execution context
*/
static void tcp_sock_refill_init(const struct ctx *c)
{
if (c->ifi4)
tcp_sock_refill_pool(c, init_sock_pool4, AF_INET);
if (c->ifi6)
tcp_sock_refill_pool(c, init_sock_pool6, AF_INET6);
}
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
/**
* tcp_init() - Get initial sequence, hash secret, initialise per-socket data
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* @c: Execution context
*
* Return: 0, doesn't return on failure
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*/
int tcp_init(struct ctx *c)
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
{
unsigned b;
for (b = 0; b < TCP_HASH_TABLE_SIZE; b++)
tc_hash[b] = FLOW_SIDX_NONE;
if (c->ifi4)
tcp_sock4_iov_init(c);
if (c->ifi6)
tcp_sock6_iov_init(c);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
memset(init_sock_pool4, 0xff, sizeof(init_sock_pool4));
memset(init_sock_pool6, 0xff, sizeof(init_sock_pool6));
memset(tcp_sock_init_ext, 0xff, sizeof(tcp_sock_init_ext));
memset(tcp_sock_ns, 0xff, sizeof(tcp_sock_ns));
tcp_sock_refill_init(c);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
if (c->mode == MODE_PASTA) {
tcp_splice_init(c);
NS_CALL(tcp_ns_socks_init, c);
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
}
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
return 0;
}
/**
* tcp_port_rebind() - Rebind ports to match forward maps
* @c: Execution context
* @outbound: True to remap outbound forwards, otherwise inbound
*
* Must be called in namespace context if @outbound is true.
*/
static void tcp_port_rebind(struct ctx *c, bool outbound)
{
const uint8_t *fmap = outbound ? c->tcp.fwd_out.map : c->tcp.fwd_in.map;
const uint8_t *rmap = outbound ? c->tcp.fwd_in.map : c->tcp.fwd_out.map;
int (*socks)[IP_VERSIONS] = outbound ? tcp_sock_ns : tcp_sock_init_ext;
unsigned port;
for (port = 0; port < NUM_PORTS; port++) {
if (!bitmap_isset(fmap, port)) {
if (socks[port][V4] >= 0) {
close(socks[port][V4]);
socks[port][V4] = -1;
}
if (socks[port][V6] >= 0) {
close(socks[port][V6]);
socks[port][V6] = -1;
}
continue;
}
/* Don't loop back our own ports */
if (bitmap_isset(rmap, port))
continue;
if ((c->ifi4 && socks[port][V4] == -1) ||
(c->ifi6 && socks[port][V6] == -1)) {
if (outbound)
tcp_ns_sock_init(c, port);
else
tcp_sock_init(c, AF_UNSPEC, NULL, NULL, port);
}
}
}
/**
* tcp_port_rebind_outbound() - Rebind ports in namespace
* @arg: Execution context
*
* Called with NS_CALL()
*
* Return: 0
*/
static int tcp_port_rebind_outbound(void *arg)
{
struct ctx *c = (struct ctx *)arg;
ns_enter(c);
tcp_port_rebind(c, true);
return 0;
}
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
/**
* tcp_timer() - Periodic tasks: port detection, closed connections, pool refill
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
* @c: Execution context
* @ts: Unused
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
*/
void tcp_timer(struct ctx *c, const struct timespec *ts)
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
{
union flow *flow;
tcp: Rework window handling, timers, add SO_RCVLOWAT and pools for sockets/pipes This introduces a number of fundamental changes that would be quite messy to split. Summary: - advertised window scaling can be as big as we want, we just need to clamp window sizes to avoid exceeding the size of our "discard" buffer for unacknowledged data from socket - add macros to compare sequence numbers - force sending ACK to guest/tap on PSH segments, always in pasta mode, whenever we see an overlapping segment, or when we reach a given threshold compared to our window - we don't actually use recvmmsg() here, fix comments and label - introduce pools for pre-opened sockets and pipes, to decrease latency on new connections - set receiving and sending buffer sizes to the maximum allowed, kernel will clamp and round appropriately - defer clean-up of spliced and non-spliced connection to timer - in tcp_send_to_tap(), there's no need anymore to keep a large buffer, shrink it down to what we actually need - introduce SO_RCVLOWAT setting and activity tracking for spliced connections, to coalesce data moved by splice() calls as much as possible - as we now have a compacted connection table, there's no need to keep sparse bitmaps tracking connection activity -- simply go through active connections with a loop in the timer handler - always clamp the advertised window to half our sending buffer, too, to minimise retransmissions from the guest/tap - set TCP_QUICKACK for originating socket in spliced connections, there's no need to delay them - fix up timeout for unacknowledged data from socket Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-19 02:29:05 +02:00
(void)ts;
if (c->mode == MODE_PASTA) {
if (c->tcp.fwd_out.mode == FWD_AUTO) {
port_fwd_scan_tcp(&c->tcp.fwd_out, &c->tcp.fwd_in);
NS_CALL(tcp_port_rebind_outbound, c);
}
if (c->tcp.fwd_in.mode == FWD_AUTO) {
port_fwd_scan_tcp(&c->tcp.fwd_in, &c->tcp.fwd_out);
tcp_port_rebind(c, false);
}
}
for (flow = flowtab + c->flow_count - 1; flow >= flowtab; flow--) {
switch (flow->f.type) {
case FLOW_TCP:
if (flow->tcp.events == CLOSED)
tcp_conn_destroy(c, flow);
break;
case FLOW_TCP_SPLICE:
tcp_splice_timer(c, flow);
break;
default:
die("Unexpected %s in tcp_timer()",
FLOW_TYPE(&flow->f));
}
}
tcp_sock_refill_init(c);
if (c->mode == MODE_PASTA)
tcp_splice_refill(c);
passt: New design and implementation with native Layer 4 sockets This is a reimplementation, partially building on the earlier draft, that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW, providing L4-L2 translation functionality without requiring any security capability. Conceptually, this follows the design presented at: https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md The most significant novelty here comes from TCP and UDP translation layers. In particular, the TCP state and translation logic follows the intent of being minimalistic, without reimplementing a full TCP stack in either direction, and synchronising as much as possible the TCP dynamic and flows between guest and host kernel. Another important introduction concerns addressing, port translation and forwarding. The Layer 4 implementations now attempt to bind on all unbound ports, in order to forward connections in a transparent way. While at it: - the qemu 'tap' back-end can't be used as-is by qrap anymore, because of explicit checks now introduced in qemu to ensure that the corresponding file descriptor is actually a tap device. For this reason, qrap now operates on a 'socket' back-end type, accounting for and building the additional header reporting frame length - provide a demo script that sets up namespaces, addresses and routes, and starts the daemon. A virtual machine started in the network namespace, wrapped by qrap, will now directly interface with passt and communicate using Layer 4 sockets provided by the host kernel. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-02-16 07:25:09 +01:00
}