For some reason, this is only reported by clang-tidy 19.1.2 on
Alpine:
/home/sbrivio/passt/passt.c:314:53: error: conditional operator with identical true and false expressions [bugprone-branch-clone,-warnings-as-errors]
314 | nfds = epoll_wait(c.epollfd, events, EPOLL_EVENTS, TIMER_INTERVAL);
| ^
We do have a suppression, but not on the line preceding it, because
we also need a cppcheck suppression there. Use NOLINTBEGIN/NOLINTEND
for the clang-tidy suppression.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
On 32-bit architectures, clang-tidy reports:
/home/pi/passt/tcp.c:728:11: error: performing an implicit widening conversion to type 'uint64_t' (aka 'unsigned long long') of a multiplication performed in type 'unsigned long' [bugprone-implicit-widening-of-multiplication-result,-warnings-as-errors]
728 | if (v >= SNDBUF_BIG)
| ^
/home/pi/passt/util.h:158:22: note: expanded from macro 'SNDBUF_BIG'
158 | #define SNDBUF_BIG (4UL * 1024 * 1024)
| ^
/home/pi/passt/tcp.c:728:11: note: make conversion explicit to silence this warning
728 | if (v >= SNDBUF_BIG)
| ^
/home/pi/passt/util.h:158:22: note: expanded from macro 'SNDBUF_BIG'
158 | #define SNDBUF_BIG (4UL * 1024 * 1024)
| ^~~~~~~~~~~~~~~~~
/home/pi/passt/tcp.c:728:11: note: perform multiplication in a wider type
728 | if (v >= SNDBUF_BIG)
| ^
/home/pi/passt/util.h:158:22: note: expanded from macro 'SNDBUF_BIG'
158 | #define SNDBUF_BIG (4UL * 1024 * 1024)
| ^~~~~~~~~~
/home/pi/passt/tcp.c:730:15: error: performing an implicit widening conversion to type 'uint64_t' (aka 'unsigned long long') of a multiplication performed in type 'unsigned long' [bugprone-implicit-widening-of-multiplication-result,-warnings-as-errors]
730 | else if (v > SNDBUF_SMALL)
| ^
/home/pi/passt/util.h:159:24: note: expanded from macro 'SNDBUF_SMALL'
159 | #define SNDBUF_SMALL (128UL * 1024)
| ^
/home/pi/passt/tcp.c:730:15: note: make conversion explicit to silence this warning
730 | else if (v > SNDBUF_SMALL)
| ^
/home/pi/passt/util.h:159:24: note: expanded from macro 'SNDBUF_SMALL'
159 | #define SNDBUF_SMALL (128UL * 1024)
| ^~~~~~~~~~~~
/home/pi/passt/tcp.c:730:15: note: perform multiplication in a wider type
730 | else if (v > SNDBUF_SMALL)
| ^
/home/pi/passt/util.h:159:24: note: expanded from macro 'SNDBUF_SMALL'
159 | #define SNDBUF_SMALL (128UL * 1024)
| ^~~~~
/home/pi/passt/tcp.c:731:17: error: performing an implicit widening conversion to type 'uint64_t' (aka 'unsigned long long') of a multiplication performed in type 'unsigned long' [bugprone-implicit-widening-of-multiplication-result,-warnings-as-errors]
731 | v -= v * (v - SNDBUF_SMALL) / (SNDBUF_BIG - SNDBUF_SMALL) / 2;
| ^
/home/pi/passt/util.h:159:24: note: expanded from macro 'SNDBUF_SMALL'
159 | #define SNDBUF_SMALL (128UL * 1024)
| ^
/home/pi/passt/tcp.c:731:17: note: make conversion explicit to silence this warning
731 | v -= v * (v - SNDBUF_SMALL) / (SNDBUF_BIG - SNDBUF_SMALL) / 2;
| ^
/home/pi/passt/util.h:159:24: note: expanded from macro 'SNDBUF_SMALL'
159 | #define SNDBUF_SMALL (128UL * 1024)
| ^~~~~~~~~~~~
/home/pi/passt/tcp.c:731:17: note: perform multiplication in a wider type
731 | v -= v * (v - SNDBUF_SMALL) / (SNDBUF_BIG - SNDBUF_SMALL) / 2;
| ^
/home/pi/passt/util.h:159:24: note: expanded from macro 'SNDBUF_SMALL'
159 | #define SNDBUF_SMALL (128UL * 1024)
| ^~~~~
because, wherever we use those thresholds, we define the other term
of comparison as uint64_t. Define the thresholds as unsigned long long
as well, to make sure we match types.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Given that we're comparing against 'n', which is signed, we cast
TAP_BUF_BYTES to ssize_t so that the maximum buffer usage, calculated
as the difference between TAP_BUF_BYTES and ETH_MAX_MTU, will also be
signed.
This doesn't necessarily happen on 32-bit architectures, though. On
armhf and i686, clang-tidy 18.1.8 and 19.1.2 report:
/home/pi/passt/tap.c:1087:16: error: comparison of integers of different signs: 'ssize_t' (aka 'int') and 'unsigned int' [clang-diagnostic-sign-compare,-warnings-as-errors]
1087 | for (n = 0; n <= (ssize_t)TAP_BUF_BYTES - ETH_MAX_MTU; n += len) {
| ~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cast the whole difference to ssize_t, as we know it's going to be
positive anyway, instead of relying on that side effect.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
cppcheck 2.14.2 on Alpine reports:
dhcpv6.c:431:32: style: Variable 'client_id' can be declared as pointer to const [constVariablePointer]
struct opt_hdr *ia, *bad_ia, *client_id;
^
It's not only 'client_id': we can declare 'ia' as const pointer too.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
cppcheck 2.16.0 reports:
dhcpv6.c:334:14: style: The comparison 'ia_type == 3' is always true. [knownConditionTrueFalse]
if (ia_type == OPT_IA_NA) {
^
dhcpv6.c:306:12: note: 'ia_type' is assigned value '3' here.
ia_type = OPT_IA_NA;
^
dhcpv6.c:334:14: note: The comparison 'ia_type == 3' is always true.
if (ia_type == OPT_IA_NA) {
^
this is not really the case as we set ia_type to OPT_IA_TA and then
jump back.
Anyway, there's no particular reason to use a goto here: add a trivial
foreach() macro to go through elements of an array and use it instead.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
In the NDP tests we search explicitly for a guest address with prefix
length 64. AFAICT this is an attempt to specifically find the SLAAC
assigned address, rather than something assigned by other means. We can do
that more explicitly by checking for .protocol == "kernel_ra". however.
The SLAAC prefixes we assigned *will* always be 64-bit, that's hard-coded
into our NDP implementation. RFC4862 doesn't really allow anything else
since the interface identifiers for an Ethernet-like link are 64-bits.
Let's actually verify that, rather than just assuming it, by extracting the
prefix length assigned in the guest and checking it as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
When determining the namespace's IPv6 address in the perf test setup, we
explicitly filter for addresses with a 64-bit prefix length. There's no
real reason we need that - as long as it's a global address we can use it.
I suspect this was copied without thinking from a similar example in the
NDP tests, where the 64-bit prefix length _is_ meaningful (though it's not
entirely clear if the handling is correct there either).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently nstool die()s on essentially any error. In most cases that's
fine for our purposes. However, it's a problem when in "hold" mode and
getting an IO error on an accept()ed socket. This could just indicate that
the control client aborted prematurely, in which case we don't want to
kill of the namespace we're holding.
Adjust these to print an error, close() the control client socket and
carry on. In addition, we need to explicitly ignore SIGPIPE in order not
to be killed by an abruptly closed client connection.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
nstool in "exec" mode will propagate some signals (specifically SIGTERM) to
the process in the namespace it executes. The signal handler which
accomplishes this is called simply sig_handler(). However, it turns out
we're going to need some other signal handlers, so rename this to the more
specific sig_propagate().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
While experimenting with cppcheck options, I hit several false positives
caused by this bug: https://trac.cppcheck.net/ticket/13227
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We have an ASSERT() verifying that we're able to look up the flow in
udp_reply_sock_handler(). However, we dereference uflow before that in
an initializer, rather defeating the point. Rearrange to avoid that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We don't modify this structure at all. For some reason cppcheck doesn't
catch this with our current options, but did when I was experimenting with
some different options.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
tcp_info.h exists just to contain a modern enough version of struct
tcp_info for our needs, removing compile time dependency on the version of
kernel headers. There are several other cases where we can remove similar
compile time dependencies on kernel version. Prepare for that by renaming
tcp_info.h to linux_dep.h.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
On certain architectures we get a warning about comparison between
different signedness integers in fwd_probe_ephemeral(). This is because
NUM_PORTS evaluates to an unsigned integer. It's a fixed value, though
and we know it will fit in a signed long on anything reasonable, so add
a cast to suppress the warning.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We supply a weak alias for ffsl() in case it's not defined in our libc.
Except.. we don't have any users for it any more, so remove it.
make cppcheck doesn't spot this at present for complicated reasons, but it
might with tweaks to the options I'm experimenting with.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
clangd's default configuration seems to try to treat .h files as C++ not
C. There are many more spurious warnings generated at present, but this
removes some of the most egregious ones.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We probe the available stack limit in the Makefile using rlimit, then use
that to set the size of the stack when we clone() extra threads. But
the rlimit at compile time need not be the same as the rlimit at runtime,
so that's not particularly sensible.
Ideally, we'd set the stack size based on an estimate of the actual
maximum stack usage of all our clone()ed functions. We don't have that
at the moment, but to keep things simple just set it to 1MiB - that's what
the current probe will set things to on my default configuration Fedora 40,
so it's likely to be fine in most cases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We insert -DARCH for all compiles, based on TARGET_ARCH determined in the
Makefile. However, this is only used in qrap.c, not anywhere else in
passt or pasta. Only supply this -D when compiling qrap specifically.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently we construct the AUDIT_ARCH variable in the Makefile, then pass
it into the C code with -D. The only place that uses it, though is the
BPF filter generated by seccomp.sh. seccomp.sh already needs to do things
differently depending on the arch, so it might as well just insert the
expanded AUDIT_ARCH directly into the generated code, rather than using
a #define. Arguably this is better, even, since it ensures more locally
that the arch the BPF checks for matches the arch seccomp.sh built the
filter for.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
NETNS_RUN_DIR is set in the Makefile, then passed into the C code with
-D. But NETNS_RUN_DIR is just a fixed string, it doesn't depend on any
make probes or variables, so there's really no reason to handle it via the
Makefile. Just move it to a plain #define in conf.c.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Since it's the size of a chunk of memory it would seem logical that
RTA_PAYLOAD() returns size_t. However, it doesn't - it explicitly casts
its result to an int. RTNH_OK(), which often takes the result of
RTA_PAYLOAD() as a parameter compares it to an int, so using size_t can
result in comparison of different-signed integer warnings from clang.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Due to a copy-pasta error, this returns 'PIF_NONE' instead of NULL on the
failure case. PIF_NONE expands to 0, which turns into NULL, but it's
still confusing, so fix it. This removes a clang warning.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We pass 'environ' to execve() in arch_avc2_exec(), so that we retain the
environment in the current process. But the declaration of 'environ' is
a bit weird - it doesn't seem to be in a standard header, requiring a
manual explicit declaration. But, we can avoid needing to reference it
explicitly by using execv() instead of execve(). This removes a clang
warning.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently we configure clang-tidy with a very long command line spelled out
in the Makefile (mostly a big list of lints to disable). Move it from here
into a .clang-tidy configuration file, so that the config is accessible if
clang-tidy is invoked in other ways (e.g. via clangd) as well. As a bonus
this also means that we can move the bulky comments about why we're
suppressing various tests inline with the relevant config lines.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There are things in qrap.c that clang-tidy complains about that aren't
worth fixing. So, we currently exclude it using $(filter-out). However,
we already have a make variable which has just the passt sources, excluding
qrap, so we can use that instead of the awkward filter-out expression.
Currently, we still include qrap.c for cppcheck, but there's not much
point doing so: it's, well, qrap, so we don't care that much about lints.
Exclude it from cppcheck as well, for consistency.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
I've been experimenting with clangd, but its default format style is
horrid. Since our style is basically that of the Linux kernel, copy the
.clang-format from the kernel, minus reference to a bunch of kernel
specific macros.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Most of our transfer tests using socat use 'sleep' waaiting for the server
side to be ready before starting the client. However in two_guests/basic
the sleep is in the wrong place: rather than being between starting the
server and starting the client, it's after waiting for the server to
complete. This causes occasional hangs when the client runs before the
server is ready - in that case the receiving guest sends an RST, which we
don't (currently) propagate back to the sender.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
On ppc64le, TUNSETIFF happens to be 2147767498, which is bigger than
INT_MAX (2^31 - 1), and musl declares the second argument of ioctl()
as 'int', not 'unsigned long' like glibc does, probably because of how
POSIX specifies the equivalent argument, int dcmd, in posix_devctl(),
so gcc reports a warning:
tap.c: In function 'tap_ns_tun':
tap.c:1291:24: warning: overflow in conversion from 'long unsigned int' to 'int' changes value from '2147767498' to '-2147199798' [-Woverflow]
1291 | rc = ioctl(fd, TUNSETIFF, &ifr);
| ^~~~~~~~~
We don't care about that overflow, so explicitly cast TUNSETIFF to
int.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Use a plain uint16_t instead and avoid including one extra header:
the 'bitwise' attribute of __sum16 is just used by sparse(1).
Reported-by: omni <omni+alpine@hack.org>
Fixes: 3d484aa370 ("tcp: Update TCP checksum using an iovec array")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
I thought we could just set errno to 0, do a bunch of stuff, and check
that errno didn't change to infer we succeeded. But clang-tidy,
starting with LLVM 19, reports:
/home/sbrivio/passt/util.c:465:6: error: An undefined value may be read from 'errno' [clang-analyzer-unix.Errno,-warnings-as-errors]
465 | if (errno)
| ^
/usr/include/errno.h:38:16: note: expanded from macro 'errno'
38 | # define errno (*__errno_location ())
| ^~~~~~~~~~~~~~~~~~~~~~
/home/sbrivio/passt/util.c:446:6: note: Assuming the condition is false
446 | if (pid == -1) {
| ^~~~~~~~~
/home/sbrivio/passt/util.c:446:2: note: Taking false branch
446 | if (pid == -1) {
| ^
/home/sbrivio/passt/util.c:451:6: note: Assuming 'pid' is 0
451 | if (pid) {
| ^~~
/home/sbrivio/passt/util.c:451:2: note: Taking false branch
451 | if (pid) {
| ^
/home/sbrivio/passt/util.c:463:2: note: Assuming that 'close' is successful; 'errno' becomes undefined after the call
463 | close(devnull_fd);
| ^~~~~~~~~~~~~~~~~
/home/sbrivio/passt/util.c:465:6: note: An undefined value may be read from 'errno'
465 | if (errno)
| ^
/usr/include/errno.h:38:16: note: expanded from macro 'errno'
38 | # define errno (*__errno_location ())
| ^~~~~~~~~~~~~~~~~~~~~~
And the LLVM documentation for the unix.Errno checker, 1.1.8.3
unix.Errno (C), mentions, at:
https://clang.llvm.org/docs/analyzer/checkers.html#unix-errno
that:
The C and POSIX standards often do not define if a standard library
function may change value of errno if the call does not fail.
Therefore, errno should only be used if it is known from the return
value of a function that the call has failed.
which is, somewhat surprisingly, the case for close().
Instead of using errno, check the actual return values of the calls
we issue here.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
For clock_gettime(), we shouldn't ignore errors if they happen at
initialisation phase, because something is seriously wrong and it's
not helpful if we proceed as if nothing happened.
As we're up and running, though, it's probably better to report the
error and use a stale value than to terminate altogether. Make sure
we use a zero value if we don't have a stale one somewhere.
For timerfd_gettime() and timerfd_settime() failures, just report an
error, there isn't much else we can do.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In pcap_init(), we should always open the packet capture file with
O_CLOEXEC, even if we're not running in foreground: O_CLOEXEC means
close-on-exec, not close-on-fork.
In logfile_init() and pidfile_open(), the fact that we pass a third
'mode' argument to open() seems to confuse the android-cloexec-open
checker in LLVM versions from 16 to 19 (at least).
The checker is suggesting to add O_CLOEXEC to 'mode', and not in
'flags', where we already have it.
Add a suppression for clang-tidy and a comment, and avoid repeating
those three times by adding a new helper, output_file_open().
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We use fprintf() to print to standard output or standard error
streams. If something gets truncated or there's an output error, we
don't really want to try and report that, and at the same time it's
not abnormal behaviour upon which we should terminate, either.
Just silence the warning with an ugly FPRINTF() variadic macro casting
the fprintf() expressions to void.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
clang-tidy, starting from LLVM version 16, up to at least LLVM version
19, now checks that we detect and handle errors for snprintf() as
requested by CERT C rule ERR33-C. These warnings were logged with LLVM
version 19.1.2 (at least Debian and Fedora match):
/home/sbrivio/passt/arch.c:43:3: error: the value returned by this function should not be disregarded; neglecting it may lead to errors [cert-err33-c,-warnings-as-errors]
43 | snprintf(new_path, PATH_MAX + sizeof(".avx2"), "%s.avx2", exe);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/sbrivio/passt/arch.c:43:3: note: cast the expression to void to silence this warning
/home/sbrivio/passt/conf.c:577:4: error: the value returned by this function should not be disregarded; neglecting it may lead to errors [cert-err33-c,-warnings-as-errors]
577 | snprintf(netns, PATH_MAX, "/proc/%ld/ns/net", pidval);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/sbrivio/passt/conf.c:577:4: note: cast the expression to void to silence this warning
/home/sbrivio/passt/conf.c:579:5: error: the value returned by this function should not be disregarded; neglecting it may lead to errors [cert-err33-c,-warnings-as-errors]
579 | snprintf(userns, PATH_MAX, "/proc/%ld/ns/user",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
580 | pidval);
| ~~~~~~~
/home/sbrivio/passt/conf.c:579:5: note: cast the expression to void to silence this warning
/home/sbrivio/passt/pasta.c:105:2: error: the value returned by this function should not be disregarded; neglecting it may lead to errors [cert-err33-c,-warnings-as-errors]
105 | snprintf(ns, PATH_MAX, "/proc/%i/ns/net", pasta_child_pid);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/sbrivio/passt/pasta.c:105:2: note: cast the expression to void to silence this warning
/home/sbrivio/passt/pasta.c:242:2: error: the value returned by this function should not be disregarded; neglecting it may lead to errors [cert-err33-c,-warnings-as-errors]
242 | snprintf(uidmap, BUFSIZ, "0 %u 1", uid);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/sbrivio/passt/pasta.c:242:2: note: cast the expression to void to silence this warning
/home/sbrivio/passt/pasta.c:243:2: error: the value returned by this function should not be disregarded; neglecting it may lead to errors [cert-err33-c,-warnings-as-errors]
243 | snprintf(gidmap, BUFSIZ, "0 %u 1", gid);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/sbrivio/passt/pasta.c:243:2: note: cast the expression to void to silence this warning
/home/sbrivio/passt/tap.c:1155:4: error: the value returned by this function should not be disregarded; neglecting it may lead to errors [cert-err33-c,-warnings-as-errors]
1155 | snprintf(path, UNIX_PATH_MAX - 1, UNIX_SOCK_PATH, i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/sbrivio/passt/tap.c:1155:4: note: cast the expression to void to silence this warning
Don't silence the warnings as they might actually have some merit. Add
an snprintf_check() function, instead, checking that we're not
truncating messages while printing to buffers, and terminate if the
check fails.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
We'll deprecate qrap(1) soon, and warnings reported by clang-tidy as
of LLVM versions 16 and later would need a bunch of changes there to
be addressed, mostly around CERT C rule ERR33-C and checking return
code from snprintf().
It makes no sense to fix warnings in qrap just for the sake of it, so
officially declare the bitrotting season open.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Following the preparations in the previous commit, we can now remove
the payload and flag queues dedicated for TCPv6 and TCPv4 and move all
traffic into common queues handling both protocol types.
Apart from reducing code and memory footprint, this change reduces
a potential risk for TCPv4 traffic starving out TCPv6 traffic.
Since we always flush out the TCPv4 frame queue before the TCPv6 queue,
the latter will never be handled if the former fails to send all its
frames.
Tests with iperf3 shows no measurable change in performance after this
change.
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
l2 tap queue entries are currently initialized at system start, and
reused with preset headers through its whole life time. The only
fields we need to update per message are things like payload size
and checksums.
If we want to reuse these entries between ipv4 and ipv6 messages we
will need to set the pointer to the right header on the fly per
message, since the header type may differ between entries in the same
queue.
The same needs to be done for the ethernet header.
We do these changes here.
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Remove debian-9-nocloud-amd64-daily-20200210-166.qcow2 and
openSUSE-Tumbleweed-JeOS.x86_64-kvm-and-xen.qcow2 as they cannot be
downloaded anymore
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Remove the err label as there is only one caller, and move code
to the caller position. ret is not needed here anymore as it is
always 0.
Remove sendlen as we can user directly len.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In order to use particular fields from the TCP_INFO getsockopt() we
need them to be in structure returned by the runtime kernel. We attempt
to determine that with the HAS_BYTES_ACKED and HAS_MIN_RTT defines, probed
in the Makefile.
However, that's not correct, because the kernel headers we compile against
may not be the same as the runtime kernel. We instead should check against
the size of structure returned from the TCP_INFO getsockopt() as we already
do for tcpi_snd_wnd. Switch from the compile time flags to a runtime
test.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In order to use the tcpi_snd_wnd field from the TCP_INFO getsockopt() we
need the field to be supported in the runtime kernel (snd_wnd_cap).
In fact we should check that for for every tcp_info field we want to use,
beyond the very old ones shared with BSD. Prepare to do that, by
generalising the probing from setting a single bool to instead record the
size of the returned TCP_INFO structure. We can then use that recorded
value to check for the presence of any field we need.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In the Makefile we probe to create several defines based on the presence
of particular fields in struct tcp_info. These defines are used for two
purposes, neither of which they accomplish well:
1) Determining if the tcp_info fields are available at runtime. For this
purpose the defines are Just Plain Wrong, since the runtime kernel may
not be the same as the compile time kernel. We corrected this for
tcp_snd_wnd, but not for tcpi_bytes_acked or tcpi_min_rtt
2) Allowing the source to compile against older kernel headers which don't
have the fields in question. This works in theory, but it does mean
we won't be able to use the fields, even if later run against a
newer kernel. Furthermore, it's quite fragile: without much more
thorough tests of builds in different environments that we're currently
set up for, it's very easy to miss cases where we're accessing a field
without protection from an #ifdef. For example we currently access
tcpi_snd_wnd without #ifdefs in tcp_update_seqack_wnd().
Improve this with a different approach, borrowed from qemu (which has many
instances of similar problems). Don't compile against linux/tcp.h, using
netinet/tcp.h instead. Then for when we need an extension field, define
a struct tcp_info_linux, copied from the kernel, with all the fields we're
interested in. That may need updating from future kernel versions, but
only when we want to use a new extension, so it shouldn't be frequent.
This allows us to remove the HAS_SND_WND define entirely. We keep
HAS_BYTES_ACKED and HAS_MIN_RTT now, since they're used for purpose (1),
we'll fix that in a later patch.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Trivial grammar fixes in comments]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Don't report bogus failures (with --trace) just because the return
value is not zero.
Link: https://github.com/containers/podman/issues/24219
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
In tcp_splice_sock_handler(), we try to calculate how much we can move
from the pipe to the writing socket: if we just read some bytes, we'll
use that amount, but if we haven't, we just try to empty the pipe.
However, if we just read something, that doesn't mean that that's all
the data we have on the pipe, as it's obvious from this sequence, where:
pasta: epoll event on connected spliced TCP socket 54 (events: 0x00000001)
Flow 0 (TCP connection (spliced)): 98304 from read-side call
Flow 0 (TCP connection (spliced)): 33615 from write-side call (passed 98304)
Flow 0 (TCP connection (spliced)): -1 from read-side call
Flow 0 (TCP connection (spliced)): -1 from write-side call (passed 524288)
Flow 0 (TCP connection (spliced)): event at tcp_splice_sock_handler:580
Flow 0 (TCP connection (spliced)): OUT_WAIT_0
we first pile up 98304 - 33615 = 64689 pending bytes, that we read but
couldn't write, as the receiver buffer is full, and we set the
corresponding OUT_WAIT flag. Then:
pasta: epoll event on connected spliced TCP socket 54 (events: 0x00000001)
Flow 0 (TCP connection (spliced)): 32768 from read-side call
Flow 0 (TCP connection (spliced)): -1 from write-side call (passed 32768)
Flow 0 (TCP connection (spliced)): event at tcp_splice_sock_handler:580
we splice() 32768 more bytes from our receiving side to the pipe. At
some point:
pasta: epoll event on connected spliced TCP socket 49 (events: 0x00000004)
Flow 0 (TCP connection (spliced)): event at tcp_splice_sock_handler:489
Flow 0 (TCP connection (spliced)): ~OUT_WAIT_0
Flow 0 (TCP connection (spliced)): 1320 from read-side call
Flow 0 (TCP connection (spliced)): 1320 from write-side call (passed 1320)
the receiver is signalling to us that it's ready for more data
(EPOLLOUT). We reset the OUT_WAIT flag, read 1320 more bytes from
our receiving socket into the pipe, and that's what we write to the
receiver, forgetting about the pending 97457 bytes we had, which the
receiver might never get (not the same 97547 bytes: we'll actually
send 1320 of those).
This condition is rather hard to reproduce, and it was observed with
Podman pulling container images via HTTPS. In the traces above, the
client is side 0 (the initiating peer), and the server is sending the
whole data.
Instead of splicing from pipe to socket the amount of data we just
read, we need to splice all the pending data we piled up until that
point. We could do that using 'read' and 'written' counters, but
there's actually no need, as the kernel also keeps track of how much
data is available on the pipe.
So, to make this simple and more robust, just give the whole pipe size
as length to splice(). The kernel knows what to do with it.
Later in the function, we used 'to_write' for an optimisation meant
to reduce wakeups which retries right away to splice() in both
directions if we couldn't write to the receiver the whole amount of
pending data. Calculate a 'pending' value instead, only if we reach
that point.
Now that we check for the actual amount of pending data in that
optimisation, we need to make sure we don't compare a zero or negative
'written' value: if we met that, it means that the receiver signalled
end-of-file, an error, or to try again later. In those three cases,
the optimisation doesn't make any sense, so skip it.
Reported-by: Ed Santiago <santiago@redhat.com>
Reported-by: Paul Holzinger <pholzing@redhat.com>
Analysed-by: Paul Holzinger <pholzing@redhat.com>
Link: https://github.com/containers/podman/issues/24219
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
As a rule, we prefer constructing packets with matching C structures,
rather than building them byte by byte. However, one case we still build
byte by byte is the TCP options we include in SYN packets (in fact the only
time we generate TCP options on the tap interface).
Rework this to use a structure and initialisers which make it a bit
clearer what's going on.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by; Stefano Brivio <sbrivio@redhat.com>
In pasta mode, where addressing permits we "splice" connections, forwarding
directly from host socket to guest/container socket without any L2 or L3
processing. This gives us a very large performance improvement when it's
possible.
Since the traffic is from a local socket within the guest, it will go over
the guest's 'lo' interface, and accordingly we set the guest side address
to be the loopback address. However this has a surprising side effect:
sometimes guests will run services that are only supposed to be used within
the guest and are therefore bound to only 127.0.0.1 and/or ::1. pasta's
forwarding exposes those services to the host, which isn't generally what
we want.
Correct this by instead forwarding inbound "splice" flows to the guest's
external address.
Link: https://github.com/containers/podman/issues/24045
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The tests in pasta/tcp and pasta/udp for inbound transfers have the server
listening within the namespace explicitly bound to 127.0.0.1 or ::1. This
only works because of the behaviour of inbound splice connections, which
always appear with both source and destination addresses as loopback in
the namespace. That's not an inherent property for "spliced" connections
and arguably an undesirable one. Also update the test names to make it
clearer that these tests are expecting to exercise the "splice" path.
Interestingly this was already correct for the equivalent passt_in_ns/*,
although we also update the test names for clarity there.
Note that there are similar issues in some of the podman tests, addressed
in https://github.com/containers/podman/pull/24064
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
