...and not in pasta's namespace: the fakeroot(1) version shipping
with (at least) Fedora 36 assumes "nested" operation as it sees that
the UID is 0, and claims it's not supported.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
dhclient might be in /usr/sbin on recent versions of Fedora, and
mbuto just adds it to the same location as it was on the host:
just call dhclient instead of /sbin/dhclient.
This also applies for dhclient-script: given that we create the file
on boot, pass its explicit location with -sf.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Targets running static checkers (cppcheck and clang-tidy) need
seccomp.h, but the latter is not included in HEADERS. Add it.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
If we append CFLAGS to the ones passed via command line (if any),
-D options we append will override -D options passed on command line
(if any).
For example, OpenSUSE build flags include -D_FORTIFY_SOURCE=3, and we
want to have -D_FORTIFY_SOURCE=2, if and only if not overridden. The
current behaviour implies we redefine _FORTIFY_SOURCE as 2, though.
Instead of appending CFLAGS, prepend them by adding all the default
build flags to another variable, a simply expanded one (defined with
:=), named FLAGS, and pass that *before* CFLAGS in targets, so that
defines from command line can override default flags.
Reported-by: Dario Faggioli <dfaggioli@suse.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Dario Faggioli <dfaggioli@suse.com>
We use the [ "$x" -eq "$x" ] syntax to check if $x is a number. The
behaviour is clearly implied by POSIX, but some shells might actually
report the (intended) error, and dash floods script.log with
"Illegal number" error messages. Hide them.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Because UDP is connectionless we don't have an in-built end-of-stream
signal for our connectivity tests. We work around this by explicitly
adding an end marker to our sample data and killing the listening end once
it is seen.
However, socat has some built-in options - null-eof and shut-null - which
can be used to signal the end of stream with a zero-length UDP packet.
Use these to simplify how the UDP tests are implemented.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
udp_tap_handler() currently skips outbound packets if they have a payload
length of zero. This is not correct, since in a datagram protocol zero
length packets still have meaning.
Adjust this to correctly forward the zero-length packets by using a msghdr
with msg_iovlen == 0.
Bugzilla: https://bugs.passt.top/show_bug.cgi?id=19
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In udp_tap_handler() the array of msghdr structures, mm[], is initialized
to zero. Since UIO_MAXIOV is 1024, this can be quite a large zero, which
is expensive if we only end up using a few of its entries. It also makes
it less obvious how we're setting all the control fields at the point we
actually invoke sendmmsg().
Rather than pre-initializing it, just initialize each element as we use it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The tests generate a performance report in $BASEPATH/perf.js and
hooks/pre-push copies it to the website. To avoid cluttering the working
directory, instead put perf.js in $LOGDIR/web, since it's a test output
artefact. Update hooks/pre-push to copy from its new location.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The asciinema video handling creates a number of temporary files (.uncat,
.start, .stop) which currently go into the source tree. Put them in the
temporary state directory to avoid clutter.
The final processed output is now placed into test_logs/web/ along with the
corresponding .js file with links, since they're essentially test
artefacts. hooks/pre-push is updated to look for those files in the new
location when updating the web site.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Avoiding putting them in bare /tmp means they will be automatically
cleaned up with everything else.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently they go in the passt source tree with a fixed names, which means
their presence can mess with subsequent test runs.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The capture files are more or less a different form of log output from the
tests, so place them in $LOGDIR.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of using the 'temp' and 'tempdir' DSL directives to create
temporary files, use fixed paths relative to __STATEDIR__. This has two
advantages:
1) The files are automatically cleaned up if the tests fail (and even if
that doesn't work they're easier to clean up manuall)
2) When debugging tests it's easier to figure out which of the temporary
files are relevant to whatever's going wrong
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the context command dispatch subsystem creates a bunch of
temporary files in $LOGDIR, which is messy. Store them in $STATEDIR which
is for precisely this purpose. The logs from each context still go into
$LOGDIR.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We use this fifo to send messages to the information pane. Put it in the
state directory so it doesn't need its own cleanup.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The test scripts create a bunch of temporary files to keep track of
internal state. Some are made in /tmp with individual mktemp calls, some
go in the passt source directory, and some go in $LOGDIR. This can
sometimes make it messy to clean up after failed test runs.
Start cleaning this up by creating a single "state" directory ($STATEBASE)
in /tmp for all the state or temporary files used by a single test run.
Clean it up automatically in cleanup() - except when DEBUG==1, because
those files can be useful for debugging test script failures.
We create subdirectories under $STATEBASE for each setup function, exposed
as $STATESETUP. We also create subdirectories for each test script and
expose those to the scripts as __STATEDIR__.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We install a cleanup() function with 'trap' in order to clean up temporary
files we generate during the tests. However, we deinstall it after
run_term, which means it won't run in most of the cases where it would be
useful. Even if "run from_term" exits with an error, that error will be
hidden from the run_term wrapper because it's within a tmux session, so we
will return from run_term normally, uninstall the trap and never clean up.
In fact there's no reason to uninstall the trap at all, it works just as
well on the success exit path as an error exit path.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For example, passt/dhcp rather than dhcp/passt. This is more
consistent with the two_guests and other test groups, and makes some
other cleanups simpler.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Put the pieces together to use the new style context based dispatch for
the passt_in_pasta tests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we have all the pieces we need for issuing commands both into
namespaces and into guests, we can use those to convert the two_guests to
using only the new style context command issue.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Extends the context system in the test scripts to allow executing commands
within a guest. Do this without requiring an existing network in the guest
by using socat to run ssh via a vsock connection.
We do need some additional "sleep"s in the tests, because the new
faster dispatch means that sometimes we attempt to connect before
socat has managed to listen.
For now, only use this for the plain "passt" tests. The "passt_in_ns" and
other tests have additional complications we still need to deal with.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Extend the context system to allow commands to be run in a namespace
created with unshare, and use it for the namespace used in the pasta tests.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
In our test scripts we need to do some ugly parsing of /proc and/or pstree
output in order to get the PIDs of processes running in namespaces so that
we can connect to those namespaces with nsenter or pasta.
This is actually a pretty tricky problem with standard tools. To determine
the PID from the outside of the namespace we need to know how the process
of interest is related to the unshare or pasta process (child? one of
several children? grandchild?) as well as then parsing /proc or ps output.
This is slightly awkward now, and will get worse with future changes I'd
like to make to have processes are dispatched.
The obvious solution would be to have the process of interest (which we
control) report its own PID, but that doesn't work easily, because it is in
a PID namepace and sees only its local PID not the global PID we need to
address it from outside.
To handle this, add a small custom tool, "nsholder". This takes a path
and a mode parameter. In "hold" mode it will create a unix domain socket
bound to the path and listening. In "pid" mode it will get the "hold"ing
process's pid via the unix socket using SO_PEERCRED, which translates
between PID namespaces. In "stop" mode it will send a message to the
socket causing the "hold"ing process to clean up and exit.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Convert the pasta and passt tests to use new-style context execution
for the things that run in the "passt" frame. Don't touch the
passt_in_ns or two_guests tests yet, because they run passt inside a
namespace which introduces some additional complications we have yet
to handle.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Convert most of the tests to use the new-style system for issuing commands
for all host commands. We leave the distro tests for now: they use
the same pane for both host and guest commands which we'll need some more
things to deal with.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We're creating a system for tests to more reliably execute commands in
various contexts (e.g. host, guest, namespace). That transition is going
to happen over a number of steps though, so in the meantime we need to deal
with both the old-style issuing of commands via typing into and screen
scraping tmux panels, and the new-style system for executing commands in
context.
Introduce some transitional helpers which will issue a command via context
if the requested context is initialized, but will otherwise fall back to
the old style tmux panel based method. Re-implement the various test DSL
commands in terms of these new helpers.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We're moving to a new way of the tests dispatching commands to running in
contexts (host, guest, namespace, etc.). As we make this transition,
though, we still want the user to be able to watch the commands running
in a context, as they previously could from the commands issued in the
pane.
Add a helper to set up a pane to watch a context's log to allow this. In
some cases we currently issue commands from several different logical
contexts in the same pane, so allow a pane to watch several contexts at
once. Also use tail's --retry option to allow starting the watch before
we've initialized the context which will be useful in some cases.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
For the tests, we need to run commands in various contexts: in the host,
in a guest or in a namespace. Currently we do this by running each context
in a tmux pane, and using tmux commands to type the commands into the
relevant pane, then screen-scrape the output for the results if we need
them.
This is very fragile, because we have to make various assumptions to parse
the output. Those can break if a shell doesn't have the prompt we expect,
if the tmux pane is too small or in various other conditions.
This starts some library functions for a new "context" system, that
provides a common way to invoke commands in a given context, in a way that
properly preserves stdout, stderr and the process return code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Our test DSL has a number of paired commands to run something in the
background in a pane, then later to wait for it to complete. However, in
some of the tests we have these mismatched - starting a command in one
pane, then waiting for it in another.
We appear to get away with this for some reason, but it's not correct and
future changes make it cause more problems.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently --userns is only allowed when pasta is attaching to an existing
netns or PID, and is prohibited when creating a new netns by spawning a
command or shell.
With the new handling of userns, this check isn't neccessary. I'm not sure
if there's any use case for --userns with a spawned command, but it's
strictly more flexible and requires zero extra code, so we might as well.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
passt/pasta can interact with user namespaces in a number of ways:
1) With --netns-only we'll remain in our original user namespace
2) With --userns or a PID option to pasta we'll join either the given
user namespace or that of the PID
3) When pasta spawns a shell or command we'll start a new user namespace
for the command and then join it
4) With passt we'll create a new user namespace when we sandbox()
ourself
However (3) and (4) turn out to have essentially the same effect. In both
cases we create one new user namespace. The spawned command starts there,
and passt/pasta itself will live there from sandbox() onwards.
Because of this, we can simplify user namespace handling by moving the
userns handling earlier, to the same point we drop root in the original
namespace. Extend the drop_user() function to isolate_user() which does
both.
After switching UID and GID in the original userns, isolate_user() will
either join or create the userns we require. When we spawn a command with
pasta_start_ns()/pasta_setup_ns() we no longer need to create a userns,
because we're already made one. sandbox() likewise no longer needs to
create (or join) an userns because we're already in the one we need.
We no longer need c->pasta_userns_fd, since the fd is only used locally
in isolate_user(). Likewise we can replace c->netns_only with a local
in conf(), since it's not used outside there.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
--netns-only is supposed to make pasta use only a network namespace, not
a user namespace. However, pasta_start_ns() has this backwards, and if
--netns-only is specified it creates a user namespace but *not* a network
namespace. Correct this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
conf_ns_open() opens file descriptors for the namespaces pasta needs, but
it doesnt really have anything to do with configuration any more. For
better clarity, move it to pasta.c and rename it pasta_open_ns(). This
makes the symmetry between it and pasta_start_ns() more clear, since these
represent the two basic ways that pasta can operate, either attaching to
an existing namespace/process or spawning a new one.
Since its no longer validating options, the errors it could return
shouldn't cause a usage message. Just exit directly with an error instead.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are a number of different ways to specify namespaces for pasta to
use. Some combinations are valid and some are not. Currently validation
for these is spread across several places: conf_ns_pid() validates PID
options specifically. Near its callsite in conf() several other checks
are made. Some additional checks are made in conf_ns_open() and finally
theres a check just before the call to pasta_start_ns().
This is quite hard to follow. Make it easier by putting all the validation
logic together in a new conf_pasta_ns() function, which subsumes
conf_ns_pid(). This reveals that some of the checks were redundant with
each other, so remove those.
For good measure, rename conf_netns() to conf_netns_opt() to make it
clearer its handling just the --netns option specifically, not overall
configuration of the netns.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
passt/pasta contains a number of routines designed to isolate passt from
the rest of the system for security. These are spread through util.c and
passt.c. Move them together into a new isolation.c file.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
passt is allowed to run as "root" (UID 0) in a user namespace, but notas
real root in the init namespace. We read /proc/self/uid_map to determine
if we're in the init namespace or not.
If we're unable to open /proc/self/uid_map we assume we're ok and
continue running as UID 0. This seems unwise. The only instances I
can think of where uid_map won't be available are if the host kernel
doesn't support namespaces, or /proc is not mounted. In neither case
is it safe to assume we're "not really" root and continue (although in
practice we'd likely fail for other reasons pretty soon anyway).
Therefore, fail with an error in this case, instead of carrying on.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the logic to work out what UID and GID we will run as is spread
across conf(). If --runas is specified it's handled in conf_runas(),
otherwise it's handled by check_root(), which depends on initialization of
the uid and gid variables by either conf() itself or conf_runas().
Make this clearer by putting all the UID and GID logic into a single
conf_ugid() function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
check_root() both checks to see if we are root (in the init namespace),
and if we are drops to an unprivileged user. To make future cleanups
simpler, split the checking for root (now in check_root()) from the actual
dropping of privilege (now in drop_root()).
Note that this does slightly alter semantics. Previously we would only
setuid() if we were originally root (in the init namespace). Now we will
always setuid() and setgid(), though it won't actually change anything if
we weren't privileged to begin with. This also means that we will now
always attempt to switch to the user specified with --runas, even if we
aren't (init namespace) root to begin with. Obviously this will fail with
an error if we weren't privileged to start with. --help and the man page
are updated accordingly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
c->uid and c->gid are first set in conf(), and last used in check_root()
itself called from conf(). Therefore these don't need to be fields in the
long lived context structure and can instead be locals in conf().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
test_iperf3() is a pretty inscrutable mess of nested background processes.
It has a number of ugly sleeps needed to wait for things to complete.
Rewrite it to be cleaner:
* Use the construct (a & b & wait) to run 'a' and 'b' in parallel, but
then wait for them both to complete before continuing
* This allows us to wait for both the server and client to finish, rather
than sleeping
* Use jq to do all the math we need to get the final result, rather than
jq followed by some complicated 'bc' mangling
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently all the throughput tests are run for 30s. This is reflected in
both the actual parameters given to the iperf commands, but also in the
matching sleeps in test_iperf3.
Allow this to be adjusted more easily with a new parameter to test_iperf3.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Reflect new parameter in comment to test_iperf3()]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
These two commands in the DSL to run an iperf client and server are always
used together, and some of the parameters must match between them. The
iperf3s must also be run more or less immediately after iperf3c, since
iperf3c will run a client in the background after a sleep and requires a
server to be running before it will work.
A bunch of things can be made cleaner if we make a single DSL command that
runs both sides of the test. For now make the combined command work
exactly like the two commands together did, warts and all.
This does lose the ability for the DSL scripts to give additional options
to the iperf3 server, but we weren't using that anyway.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The tests now use a number of pidfiles for qemu and pasta as well as
passt.pid. Broaden the .gitignore file so these aren't unintentially
committed.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We don't set any, but we should use them if they are passed in the
environment. On a Fedora Rawhide package build, annocheck
(https://sourceware.org/annobin/) reports:
Hardened: /usr/bin/passt: FAIL: bind-now test because not linked with -Wl,-z,now
...despite the build system exporting -Wl,-z,now in LDFLAGS.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
On new Ubuntu 22.04 images, stopping systemd-resolved to get the
dhclient script override resolv.conf doesn't work anymore. I
originally used that hack to avoid introducing a delay which is
needed when running it on TCG.
Keep systemd-resolved running instead, and wait for it to be ready
by retrying to resolve a domain a few times before installing
packages, so that we don't add another ugly delay that might
unnecessarily slow down things even further.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
